Re: [PATCH v2 2/3] xfstests: iterate dedupe integrity test

From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Zorro Lang <zlang@redhat.com>
Cc: fstests@vger.kernel.org, linux-xfs@vger.kernel.org
Subject: Re: [PATCH v2 2/3] xfstests: iterate dedupe integrity test
Date: Wed, 20 Jun 2018 09:26:01 -0700	[thread overview]
Message-ID: <20180620162601.GB4841@magnolia> (raw)
In-Reply-To: <20180620084114.25648-2-zlang@redhat.com>

On Wed, Jun 20, 2018 at 04:41:13PM +0800, Zorro Lang wrote:
> This case does dedupe on a dir, then copy the dir to next dir. Dedupe
> the next dir again, then copy this dir to next again, and dedupe
> again ... At the end, verify the data in the last dir is still same
> with the first one.
> 
> Signed-off-by: Zorro Lang <zlang@redhat.com>

Same SPDX comment as before but otherwise looks ok,
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

--D

> ---
> 
> V2 did below changes:
> 1) Added more description at the case beginning
> 2) Changed $TEST_DIR/${seq}md5.sum to $tmp.md5sum
> 3) Changed for ...;do format
> 4) Remove "-f mknod=0" fsstress option
> 5) Added some noise (by fsstress) in each test round.
> 
> Thanks,
> Zorro
> 
>  tests/shared/009     | 119 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/shared/009.out |   4 ++
>  tests/shared/group   |   1 +
>  3 files changed, 124 insertions(+)
>  create mode 100755 tests/shared/009
>  create mode 100644 tests/shared/009.out
> 
> diff --git a/tests/shared/009 b/tests/shared/009
> new file mode 100755
> index 00000000..5ed9faee
> --- /dev/null
> +++ b/tests/shared/009
> @@ -0,0 +1,119 @@
> +#! /bin/bash
> +# FS QA Test 009
> +#
> +# Iterate dedupe integrity test. Copy an original data0 several
> +# times (d0 -> d1, d1 -> d2, ... dn-1 -> dn), dedupe dataN everytime
> +# before copy. At last, verify dataN same with data0.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2018 Red Hat Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# duperemove only supports btrfs and xfs (with reflink feature).
> +# Add other filesystems if it supports more later.
> +_supported_fs xfs btrfs
> +_supported_os Linux
> +_require_scratch_dedupe
> +_require_command "$DUPEREMOVE_PROG" duperemove
> +
> +_scratch_mkfs > $seqres.full 2>&1
> +_scratch_mount >> $seqres.full 2>&1
> +
> +function iterate_dedup_verify()
> +{
> +	local src=$srcdir
> +	local dest=$dupdir/1
> +
> +	for ((index = 1; index <= times; index++)); do
> +		cp -a $src $dest
> +		find $dest -type f -exec md5sum {} \; \
> +			> $md5file$index
> +		# Make some noise
> +		$FSSTRESS_PROG $fsstress_opts -d $noisedir \
> +			       -n 200 -p $((5 * LOAD_FACTOR)) >/dev/null 2>&1
> +		# Too many output, so only save error output
> +		$DUPEREMOVE_PROG -dr --dedupe-options=same $dupdir \
> +			>/dev/null 2>$seqres.full
> +		md5sum -c --quiet $md5file$index
> +		src=$dest
> +		dest=$dupdir/$((index + 1))
> +	done
> +}
> +
> +srcdir=$SCRATCH_MNT/src
> +dupdir=$SCRATCH_MNT/dup
> +noisedir=$dupdir/noise
> +mkdir $srcdir $dupdir
> +mkdir $dupdir/noise
> +
> +md5file=${tmp}.md5sum
> +
> +fsstress_opts="-w -r"
> +# Create some files to be original data
> +$FSSTRESS_PROG $fsstress_opts -d $srcdir \
> +	       -n 500 -p $((5 * LOAD_FACTOR)) >/dev/null 2>&1
> +
> +# Calculate how many test cycles will be run
> +src_size=`du -ks $srcdir | awk '{print $1}'`
> +free_size=`df -kP $SCRATCH_MNT | grep -v Filesystem | awk '{print $4}'`
> +times=$((free_size / src_size))
> +if [ $times -gt $((4 * TIME_FACTOR)) ]; then
> +	times=$((4 * TIME_FACTOR))
> +fi
> +
> +echo "= Do dedup and verify ="
> +iterate_dedup_verify
> +
> +# Use the last checksum file to verify the original data
> +sed -e s#dup/$times#src#g $md5file$times > $md5file
> +echo "= Backwords verify ="
> +md5sum -c --quiet $md5file
> +
> +# read from the disk also doesn't show mutations.
> +_scratch_cycle_mount
> +echo "= Verify after cycle mount ="
> +for ((index = 1; index <= times; index++)); do
> +	md5sum -c --quiet $md5file$index
> +done
> +
> +status=0
> +exit
> diff --git a/tests/shared/009.out b/tests/shared/009.out
> new file mode 100644
> index 00000000..44a78ba3
> --- /dev/null
> +++ b/tests/shared/009.out
> @@ -0,0 +1,4 @@
> +QA output created by 009
> += Do dedup and verify =
> += Backwords verify =
> += Verify after cycle mount =
> diff --git a/tests/shared/group b/tests/shared/group
> index 49ffa8dd..9c484794 100644
> --- a/tests/shared/group
> +++ b/tests/shared/group
> @@ -11,6 +11,7 @@
>  006 auto enospc
>  007 dangerous_fuzzers
>  008 auto stress dedupe
> +009 auto stress dedupe
>  032 mkfs auto quick
>  272 auto enospc rw
>  289 auto quick
> -- 
> 2.14.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html