All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keith Busch <keith.busch@intel.com>
To: Linux PCI <linux-pci@vger.kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Sinan Kaya <okaya@kernel.org>, Thomas Tai <thomas.tai@oracle.com>,
	poza@codeaurora.org, Lukas Wunner <lukas@wunner.de>,
	Keith Busch <keith.busch@intel.com>
Subject: [PATCH 14/16] pciehp: Ignore link events during DPC event
Date: Fri, 31 Aug 2018 15:26:37 -0600	[thread overview]
Message-ID: <20180831212639.10196-15-keith.busch@intel.com> (raw)
In-Reply-To: <20180831212639.10196-1-keith.busch@intel.com>

This patch adds a channel state to a subordinate bus. When a DPC event is
triggered, the DPC driver will set the channel state to frozen, and the
pciehp driver will ignore link events if the subordinate bus is being
managed by DPC error handling.

This is safe because the pciehp and DPC drivers share the same
interrupt. The DPC driver sets the bus state in the top-half interrupt
context, and the pciehp driver checks and masks off link events in its
bottom-half error handler.

Signed-off-by: Keith Busch <keith.busch@intel.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 9 +++++++++
 drivers/pci/pcie/dpc.c           | 8 ++++++--
 include/linux/pci.h              | 6 ++++++
 3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 7c43336e08ba..a928dcccf78b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -643,6 +643,15 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
 
 	synchronize_hardirq(irq);
 	events = atomic_xchg(&ctrl->pending_events, 0);
+
+	/*
+	 * Ignore link events on the suborinate bus if error handling is
+	 * active, as link down may be expected. We'll continue to handle
+	 * presence detect changes.
+	 */
+	if (pdev->subordinate && pci_bus_offline(pdev->subordinate))
+		events &= ~PCI_EXP_SLTSTA_DLLSC;
+
 	if (!events) {
 		pci_config_pm_runtime_put(pdev);
 		return IRQ_NONE;
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index eadfd835af13..93ce26191a2b 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -92,7 +92,8 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
 			      PCI_EXP_DPC_STATUS_TRIGGER);
-
+	if (pdev->subordinate)
+		pdev->subordinate->error_state = pci_channel_io_normal;
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
@@ -204,8 +205,11 @@ static irqreturn_t dpc_irq(int irq, void *context)
 
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
 			      PCI_EXP_DPC_STATUS_INTERRUPT);
-	if (status & PCI_EXP_DPC_STATUS_TRIGGER)
+	if (status & PCI_EXP_DPC_STATUS_TRIGGER) {
+		if (pdev->subordinate)
+			pdev->subordinate->error_state = pci_channel_io_frozen;
 		return IRQ_WAKE_THREAD;
+	}
 	return IRQ_HANDLED;
 }
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e72ca8dd6241..a76e10049b08 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -573,9 +573,15 @@ struct pci_bus {
 	struct device		dev;
 	struct bin_attribute	*legacy_io;	/* Legacy I/O for this bus */
 	struct bin_attribute	*legacy_mem;	/* Legacy mem */
+	pci_channel_state_t error_state;	/* Current connectivity state */
 	unsigned int		is_added:1;
 };
 
+static inline int pci_bus_offline(struct pci_bus *bus)
+{
+	return (bus->error_state != pci_channel_io_normal);
+}
+
 #define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
 
 /*
-- 
2.14.4

  parent reply	other threads:[~2018-09-01  1:34 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-31 21:26 [PATCH 00/16] PCI, error handling and hot plug Keith Busch
2018-08-31 21:26 ` [PATCH 01/16] PCI: Simplify disconnected marking Keith Busch
2018-08-31 21:26 ` [PATCH 02/16] PCI: Fix pci_reset_bus Keith Busch
2018-08-31 21:52   ` Sinan Kaya
2018-08-31 22:08     ` Keith Busch
2018-08-31 21:26 ` [PATCH 03/16] PCI/AER: Remove dead code Keith Busch
2018-08-31 21:26 ` [PATCH 04/16] PCI/ERR: Use slot reset if available Keith Busch
2018-09-01 17:20   ` Lukas Wunner
2018-09-04 14:53     ` Keith Busch
2018-08-31 21:26 ` [PATCH 05/16] PCI/ERR: Handle fatal error recovery Keith Busch
2018-09-01  8:31   ` Christoph Hellwig
2018-09-05  5:56   ` poza
2018-08-31 21:26 ` [PATCH 06/16] PCI/ERR: Remove devices on recovery failure Keith Busch
2018-08-31 22:26   ` Sinan Kaya
2018-08-31 21:26 ` [PATCH 07/16] PCI/ERR: Always use the first downstream port Keith Busch
2018-08-31 21:26 ` [PATCH 08/16] PCI/ERR: Simplify broadcast callouts Keith Busch
2018-09-01  8:33   ` Christoph Hellwig
2018-08-31 21:26 ` [PATCH 09/16] PCI/ERR: Report current recovery status for udev Keith Busch
2018-09-01  8:36   ` Christoph Hellwig
2018-08-31 21:26 ` [PATCH 10/16] PCI/portdrv: Provide pci error callbacks Keith Busch
2018-09-02 10:16   ` Lukas Wunner
2018-09-04 21:38     ` Keith Busch
2018-08-31 21:26 ` [PATCH 11/16] PCI/portdrv: Restore pci state on slot reset Keith Busch
2018-09-02  9:34   ` Lukas Wunner
2018-09-04 14:36     ` Keith Busch
2018-08-31 21:26 ` [PATCH 12/16] PCI/pciehp: Fix powerfault detection order Keith Busch
2018-09-01 15:18   ` Lukas Wunner
2018-09-04 14:27     ` Keith Busch
2018-08-31 21:26 ` [PATCH 13/16] PCI/pciehp: Implement error handling callbacks Keith Busch
2018-09-02 10:39   ` Lukas Wunner
2018-09-04 14:19     ` Keith Busch
2018-08-31 21:26 ` Keith Busch [this message]
2018-08-31 22:18   ` [PATCH 14/16] pciehp: Ignore link events during DPC event Sinan Kaya
2018-08-31 22:33     ` Keith Busch
2018-08-31 22:55       ` Sinan Kaya
2018-08-31 22:59         ` Keith Busch
2018-08-31 23:07           ` Sinan Kaya
2018-09-02 14:27   ` Lukas Wunner
2018-09-04 14:16     ` Keith Busch
2018-09-04 14:40       ` Lukas Wunner
2018-09-04 15:31         ` Keith Busch
2018-08-31 21:26 ` [PATCH 15/16] PCI/DPC: Wait for reset complete Keith Busch
2018-08-31 22:15   ` Sinan Kaya
2018-08-31 21:26 ` [PATCH 16/16] PCI: Unify device inaccessible Keith Busch
2018-09-02 14:39   ` Lukas Wunner
2018-09-03  0:38     ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831212639.10196-15-keith.busch@intel.com \
    --to=keith.busch@intel.com \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=okaya@kernel.org \
    --cc=poza@codeaurora.org \
    --cc=thomas.tai@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.