All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: p.zabel@pengutronix.de, mka@chromium.org, robh+dt@kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	mark.rutland@arm.com, linux-arm-msm@vger.kernel.org,
	tsoni@codeaurora.org
Subject: Re: [PATCH v3 2/6] reset: qcom: PDC Global (Power Domain Controller) reset controller
Date: Mon, 3 Sep 2018 12:31:47 -0700	[thread overview]
Message-ID: <20180903193147.GH3456@tuxbook-pro> (raw)
In-Reply-To: <20180829191215.10071-3-sibis@codeaurora.org>

On Wed 29 Aug 12:12 PDT 2018, Sibi Sankar wrote:

> Add reset controller for SDM845 SoCs to control reset signals provided
> by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors,
> Audio, SP and APPS
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/reset/Kconfig          |   9 +++
>  drivers/reset/Makefile         |   1 +
>  drivers/reset/reset-qcom-pdc.c | 124 +++++++++++++++++++++++++++++++++
>  3 files changed, 134 insertions(+)
>  create mode 100644 drivers/reset/reset-qcom-pdc.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 13d28fdbdbb5..c21da9fe51ec 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -98,6 +98,15 @@ config RESET_QCOM_AOSS
>  	  reset signals provided by AOSS for Modem, Venus, ADSP,
>  	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
>  
> +config RESET_QCOM_PDC
> +	tristate "Qualcomm PDC Reset Driver"
> +	depends on ARCH_QCOM || COMPILE_TEST
> +	help
> +	  This enables the PDC (Power Domain Controller) reset driver
> +	  for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
> +	  to control reset signals provided by PDC for Modem, Compute,
> +	  Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
> +
>  config RESET_SIMPLE
>  	bool "Simple Reset Controller Driver" if COMPILE_TEST
>  	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 4243c38228e2..d08e8b90046a 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
>  obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>  obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
>  obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> +obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
>  obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>  obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
>  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
> new file mode 100644
> index 000000000000..ab74bccd4a5b
> --- /dev/null
> +++ b/drivers/reset/reset-qcom-pdc.c
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
> +#include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +
> +#define RPMH_PDC_SYNC_RESET	0x100
> +
> +struct qcom_pdc_reset_map {
> +	u8 bit;
> +};
> +
> +struct qcom_pdc_reset_data {
> +	struct reset_controller_dev rcdev;
> +	struct regmap *regmap;
> +};
> +
> +static const struct regmap_config sdm845_pdc_regmap_config = {
> +	.name		= "pdc-reset",
> +	.reg_bits	= 32,
> +	.reg_stride	= 4,
> +	.val_bits	= 32,
> +	.max_register	= 0x20000,
> +	.fast_io	= true,
> +};
> +
> +static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
> +	[PDC_APPS_SYNC_RESET] = {0},
> +	[PDC_SP_SYNC_RESET] = {1},
> +	[PDC_AUDIO_SYNC_RESET] = {2},
> +	[PDC_SENSORS_SYNC_RESET] = {3},
> +	[PDC_AOP_SYNC_RESET] = {4},
> +	[PDC_DEBUG_SYNC_RESET] = {5},
> +	[PDC_GPU_SYNC_RESET] = {6},
> +	[PDC_DISPLAY_SYNC_RESET] = {7},
> +	[PDC_COMPUTE_SYNC_RESET] = {8},
> +	[PDC_MODEM_SYNC_RESET] = {9},
> +};
> +
> +static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
> +				struct reset_controller_dev *rcdev)
> +{
> +	return container_of(rcdev, struct qcom_pdc_reset_data, rcdev);
> +}
> +
> +static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
> +					unsigned long idx)
> +{
> +	struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
> +
> +	return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
> +				  BIT(sdm845_pdc_resets[idx].bit),
> +				  BIT(sdm845_pdc_resets[idx].bit));
> +}
> +
> +static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
> +					unsigned long idx)
> +{
> +	struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
> +
> +	return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
> +				  BIT(sdm845_pdc_resets[idx].bit), 0);
> +}
> +
> +static const struct reset_control_ops qcom_pdc_reset_ops = {
> +	.assert = qcom_pdc_control_assert,
> +	.deassert = qcom_pdc_control_deassert,
> +};
> +
> +static int qcom_pdc_reset_probe(struct platform_device *pdev)
> +{
> +	struct qcom_pdc_reset_data *data;
> +	struct device *dev = &pdev->dev;
> +	void __iomem *base;
> +	struct resource *res;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	data->regmap = devm_regmap_init_mmio(dev, base,
> +					     &sdm845_pdc_regmap_config);
> +	if (IS_ERR(data->regmap)) {
> +		dev_err(dev, "Unable to initialize regmap\n");
> +		return PTR_ERR(data->regmap);
> +	}
> +
> +	data->rcdev.owner = THIS_MODULE;
> +	data->rcdev.ops = &qcom_pdc_reset_ops;
> +	data->rcdev.nr_resets = ARRAY_SIZE(sdm845_pdc_resets);
> +	data->rcdev.of_node = dev->of_node;
> +
> +	return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static const struct of_device_id qcom_pdc_reset_of_match[] = {
> +	{ .compatible = "qcom,sdm845-pdc-global" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, qcom_pdc_reset_of_match);
> +
> +static struct platform_driver qcom_pdc_reset_driver = {
> +	.probe = qcom_pdc_reset_probe,
> +	.driver = {
> +		.name = "qcom_pdc_reset",
> +		.of_match_table = qcom_pdc_reset_of_match,
> +	},
> +};
> +module_platform_driver(qcom_pdc_reset_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm PDC Reset Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply	other threads:[~2018-09-03 19:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 19:12 [PATCH v3 0/6] Add support for PDC Global on SDM845 SoCs Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 1/6] dt-bindings: reset: Add PDC Global binding for " Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 2/6] reset: qcom: PDC Global (Power Domain Controller) reset controller Sibi Sankar
2018-09-03 19:31   ` Bjorn Andersson [this message]
2018-08-29 19:12 ` [PATCH v3 3/6] dt-bindings: remoteproc: qcom: Remove additional definition tag Sibi Sankar
2018-09-03 19:32   ` Bjorn Andersson
2018-09-10 18:28   ` Rob Herring
2018-09-10 18:28     ` Rob Herring
2018-08-29 19:12 ` [PATCH v3 4/6] dt-bindings: remoteproc: Add PDC reset binding for Q6V5 PIL Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 5/6] remoteproc: qcom: q6v5-pil: Explicitly get mss_restart line Sibi Sankar
2018-08-29 19:12 ` [PATCH v3 6/6] remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCs Sibi Sankar
2018-09-03 19:36 ` [PATCH v3 0/6] Add support for PDC Global " Bjorn Andersson
2018-10-04 18:27   ` Sibi Sankar
2018-10-05  8:46     ` Philipp Zabel
2018-10-05 18:48       ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180903193147.GH3456@tuxbook-pro \
    --to=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mka@chromium.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.