All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Chuanhua Han <chuanhua.han@nxp.com>
Cc: broonie@kernel.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org, eha@deif.com
Subject: Re: [PATCH 2/2] spi: spi-fsl-dspi: Fix support for XSPI transport mode
Date: Fri, 28 Sep 2018 08:55:15 +0200	[thread overview]
Message-ID: <20180928085515.3faa3555@bbrezillon> (raw)
In-Reply-To: <20180921070628.35153-2-chuanhua.han@nxp.com>

Hi Chuanhua,

On Fri, 21 Sep 2018 15:06:27 +0800
Chuanhua Han <chuanhua.han@nxp.com> wrote:

> This patch fixes the problem that the XSPI mode of the dspi controller
> cannot transfer data properly.
> In XSPI mode, cmd_fifo is written before tx_fifo, which transforms the
> byte order of sending and receiving data.

Again, I have a hard time understanding what the problem is. It doesn't
seem related to the ->bits_per_word aspect, and I have the feeling
you're actually abusing this field to get your problem fixed.

Regards,

Boris

> 
> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
> ---
>  drivers/spi/spi-fsl-dspi.c | 29 +++++++++++++++++++----------
>  1 file changed, 19 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index 3082e72e4f6c..44cc2bd0120e 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -220,9 +220,15 @@ static u32 dspi_pop_tx(struct fsl_dspi *dspi)
>  		if (dspi->bytes_per_word == 1)
>  			txdata = *(u8 *)dspi->tx;
>  		else if (dspi->bytes_per_word == 2)
> -			txdata = *(u16 *)dspi->tx;
> +			if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
> +				txdata =  cpu_to_le16(*(u16 *)dspi->tx);
> +			else
> +				txdata =  cpu_to_be16(*(u16 *)dspi->tx);
>  		else  /* dspi->bytes_per_word == 4 */
> -			txdata = *(u32 *)dspi->tx;
> +			if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
> +				txdata = cpu_to_le32(*(u32 *)dspi->tx);
> +			else
> +				txdata = cpu_to_be32(*(u32 *)dspi->tx);
>  		dspi->tx += dspi->bytes_per_word;
>  	}
>  	dspi->len -= dspi->bytes_per_word;
> @@ -243,15 +249,18 @@ static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
>  	if (!dspi->rx)
>  		return;
>  
> -	/* Mask of undefined bits */
> -	rxdata &= (1 << dspi->bits_per_word) - 1;
> -
>  	if (dspi->bytes_per_word == 1)
>  		*(u8 *)dspi->rx = rxdata;
>  	else if (dspi->bytes_per_word == 2)
> -		*(u16 *)dspi->rx = rxdata;
> +		if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
> +			*(u16 *)dspi->rx = be16_to_cpu(rxdata);
> +		else
> +			*(u16 *)dspi->rx = be16_to_cpu(rxdata);
>  	else /* dspi->bytes_per_word == 4 */
> -		*(u32 *)dspi->rx = rxdata;
> +		if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
> +			*(u32 *)dspi->rx = le32_to_cpu(rxdata);
> +		else
> +			*(u32 *)dspi->rx = be32_to_cpu(rxdata);
>  	dspi->rx += dspi->bytes_per_word;
>  }
>  
> @@ -593,16 +602,16 @@ static void dspi_tcfq_write(struct fsl_dspi *dspi)
>  		 */
>  		u32 data = dspi_pop_tx(dspi);
>  
> +		cmd_fifo_write(dspi);
>  		if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1)) {
>  			/* LSB */
> -			tx_fifo_write(dspi, data & 0xFFFF);
>  			tx_fifo_write(dspi, data >> 16);
> +			tx_fifo_write(dspi, data & 0xFFFF);
>  		} else {
>  			/* MSB */
> -			tx_fifo_write(dspi, data >> 16);
>  			tx_fifo_write(dspi, data & 0xFFFF);
> +			tx_fifo_write(dspi, data >> 16);
>  		}
> -		cmd_fifo_write(dspi);
>  	} else {
>  		/* Write one entry to both TX FIFO and CMD FIFO
>  		 * simultaneously.


  parent reply	other threads:[~2018-09-28  6:55 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  7:06 [PATCH 1/2] spi: spi-mem: Add the spi_set_xfer_bpw function Chuanhua Han
2018-09-21  7:06 ` [PATCH 2/2] spi: spi-fsl-dspi: Fix support for XSPI transport mode Chuanhua Han
2018-09-28  6:37   ` Chuanhua Han
2018-09-28  6:55   ` Boris Brezillon [this message]
2018-09-29 14:56   ` Esben Haabendal
2018-09-29 15:43     ` Boris Brezillon
2018-09-30  2:49     ` Chuanhua Han
2018-09-21  7:06 ` [PATCH] spi: spi-mem: Adjust op len based on message/transfer size limitations Chuanhua Han
2018-09-21  7:15   ` Chuanhua Han
2018-09-28  6:37 ` [PATCH 1/2] spi: spi-mem: Add the spi_set_xfer_bpw function Chuanhua Han
2018-09-28  6:44 ` Boris Brezillon
2018-09-28  6:59   ` Chuanhua Han
2018-09-28  7:18     ` Boris Brezillon
2018-09-28  7:29       ` Chuanhua Han
2018-09-28 13:26       ` Mark Brown
2018-10-09  9:52       ` Chuanhua Han
2018-10-09 10:05         ` Boris Brezillon
2018-10-09 10:24           ` Chuanhua Han
2018-10-09 11:20             ` Esben Haabendal
2018-10-10  2:42               ` Chuanhua Han
2018-10-10  6:38                 ` Esben Haabendal
2018-10-09 10:33           ` Mark Brown
2018-10-09 13:50             ` Esben Haabendal
2018-10-09 10:53         ` Esben Haabendal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180928085515.3faa3555@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=chuanhua.han@nxp.com \
    --cc=eha@deif.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.