From: Tomas Winkler <tomas.winkler@intel.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nayna Jain <nayna@linux.vnet.ibm.com>,
Alexander Usyskin <alexander.usyskin@intel.com>,
Tadeusz Struk <tadeusz.struk@intel.com>,
linux-integrity@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH v7 05/21] tpm: add tpm_calc_ordinal_duration() wrapper
Date: Fri, 19 Oct 2018 21:22:51 +0300 [thread overview]
Message-ID: <20181019182307.17745-6-tomas.winkler@intel.com> (raw)
In-Reply-To: <20181019182307.17745-1-tomas.winkler@intel.com>
Add convenient wrapper for ordinal duration computation
to remove boiler plate if else statement over TPM2.
if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_calc_ordinal_duration(chip, ordinal);
else
tpm1_calc_ordinal_duration(chip, ordinal);
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
V2-V3: Rebase.
V4: Add Kdoc.
V5: Adjust the kdoc to the new standard.
V6: Resend.
V7: Rebase over nuvoton patch.
drivers/char/tpm/st33zp24/st33zp24.c | 2 +-
drivers/char/tpm/tpm-interface.c | 24 ++++++++++++++++++++----
drivers/char/tpm/tpm.h | 1 +
drivers/char/tpm/tpm1-cmd.c | 1 -
drivers/char/tpm/tpm2-cmd.c | 1 -
drivers/char/tpm/tpm_i2c_nuvoton.c | 5 +----
drivers/char/tpm/tpm_tis_core.c | 6 +-----
drivers/char/tpm/xen-tpmfront.c | 2 +-
8 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
index 16be974955ea..abd675bec88c 100644
--- a/drivers/char/tpm/st33zp24/st33zp24.c
+++ b/drivers/char/tpm/st33zp24/st33zp24.c
@@ -430,7 +430,7 @@ static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
ret = wait_for_stat(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- tpm1_calc_ordinal_duration(chip, ordinal),
+ tpm_calc_ordinal_duration(chip, ordinal),
&tpm_dev->read_queue, false);
if (ret < 0)
goto out_err;
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 21c6ed2a6bc1..ca09f84bfb27 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -47,6 +47,25 @@ module_param_named(suspend_pcr, tpm_suspend_pcr, uint, 0644);
MODULE_PARM_DESC(suspend_pcr,
"PCR to use for dummy writes to facilitate flush on suspend.");
+/**
+ * tpm_calc_ordinal_duration() - calculate the maximum command duration
+ * @chip: TPM chip to use.
+ * @ordinal: TPM command ordinal.
+ *
+ * The function returns the maximum amount of time the chip could take
+ * to return the result for a particular ordinal in jiffies.
+ *
+ * Return: A maximal duration time for an ordinal in jiffies.
+ */
+unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
+{
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ return tpm2_calc_ordinal_duration(chip, ordinal);
+ else
+ return tpm1_calc_ordinal_duration(chip, ordinal);
+}
+EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
+
static int tpm_validate_command(struct tpm_chip *chip,
struct tpm_space *space,
const u8 *cmd,
@@ -222,10 +241,7 @@ static ssize_t tpm_try_transmit(struct tpm_chip *chip,
if (chip->flags & TPM_CHIP_FLAG_IRQ)
goto out_recv;
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal);
- else
- stop = jiffies + tpm1_calc_ordinal_duration(chip, ordinal);
+ stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
do {
u8 status = chip->ops->status(chip);
if ((status & chip->ops->req_complete_mask) ==
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index c59d2c20c339..73511cd89bef 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -547,6 +547,7 @@ int tpm_get_timeouts(struct tpm_chip *);
int tpm1_auto_startup(struct tpm_chip *chip);
int tpm_do_selftest(struct tpm_chip *chip);
unsigned long tpm1_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
+unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
int tpm_pm_suspend(struct device *dev);
int tpm_pm_resume(struct device *dev);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 991260134659..dfbe9c60cbcf 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -307,4 +307,3 @@ unsigned long tpm1_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
else
return duration;
}
-EXPORT_SYMBOL_GPL(tpm1_calc_ordinal_duration);
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index d26b439976bc..3eef5565286d 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -132,7 +132,6 @@ unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
else
return msecs_to_jiffies(TPM2_DURATION_DEFAULT);
}
-EXPORT_SYMBOL_GPL(tpm2_calc_ordinal_duration);
struct tpm2_pcr_read_out {
diff --git a/drivers/char/tpm/tpm_i2c_nuvoton.c b/drivers/char/tpm/tpm_i2c_nuvoton.c
index ad76482ee387..217f7f1cbde8 100644
--- a/drivers/char/tpm/tpm_i2c_nuvoton.c
+++ b/drivers/char/tpm/tpm_i2c_nuvoton.c
@@ -456,10 +456,7 @@ static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
return rc;
}
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- duration = tpm2_calc_ordinal_duration(chip, ordinal);
- else
- duration = tpm1_calc_ordinal_duration(chip, ordinal);
+ duration = tpm_calc_ordinal_duration(chip, ordinal);
rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
if (rc) {
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 14c332104de4..f9e73d0f9386 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -473,11 +473,7 @@ static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
if (chip->flags & TPM_CHIP_FLAG_IRQ) {
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- dur = tpm2_calc_ordinal_duration(chip, ordinal);
- else
- dur = tpm1_calc_ordinal_duration(chip, ordinal);
-
+ dur = tpm_calc_ordinal_duration(chip, ordinal);
if (wait_for_tpm_stat
(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
&priv->read_queue, false) < 0) {
diff --git a/drivers/char/tpm/xen-tpmfront.c b/drivers/char/tpm/xen-tpmfront.c
index 77097229bf49..b150f87f38f5 100644
--- a/drivers/char/tpm/xen-tpmfront.c
+++ b/drivers/char/tpm/xen-tpmfront.c
@@ -164,7 +164,7 @@ static int vtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
notify_remote_via_evtchn(priv->evtchn);
ordinal = be32_to_cpu(((struct tpm_input_header*)buf)->ordinal);
- duration = tpm1_calc_ordinal_duration(chip, ordinal);
+ duration = tpm_calc_ordinal_duration(chip, ordinal);
if (wait_for_tpm_stat(chip, VTPM_STATUS_IDLE, duration,
&priv->read_queue, true) < 0) {
--
2.14.4
next prev parent reply other threads:[~2018-10-19 18:27 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 18:22 [PATCH v7 00/21] tpm: separate tpm 1.x and tpm 2.x commands Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 01/21] tpm: tpm_i2c_nuvoton: use correct command duration for TPM 2.x Tomas Winkler
2018-10-20 0:51 ` Jarkko Sakkinen
2018-10-19 18:22 ` [PATCH v7 02/21] tpm2: add new tpm2 commands according to TCG 1.36 Tomas Winkler
2018-10-20 0:53 ` Jarkko Sakkinen
2018-10-19 18:22 ` [PATCH v7 03/21] tpm: sort objects in the Makefile Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 04/21] tpm: factor out tpm 1.x duration calculation to tpm1-cmd.c Tomas Winkler
2018-10-20 0:56 ` Jarkko Sakkinen
2018-10-19 18:22 ` Tomas Winkler [this message]
2018-10-19 18:22 ` [PATCH v7 06/21] tpm: factor out tpm_get_timeouts() Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 07/21] tpm: move tpm1_pcr_extend to tpm1-cmd.c Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 08/21] tpm: move tpm_getcap " Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 09/21] tpm: factor out tpm1_get_random into tpm1-cmd.c Tomas Winkler
2018-10-20 0:58 ` Jarkko Sakkinen
2018-10-23 18:42 ` Jarkko Sakkinen
2018-10-19 18:22 ` [PATCH v7 10/21] tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c Tomas Winkler
2018-10-19 18:22 ` [PATCH v7 11/21] tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c Tomas Winkler
2018-10-20 1:05 ` Jarkko Sakkinen
2018-10-23 18:43 ` Jarkko Sakkinen
2018-10-19 18:22 ` [PATCH v7 12/21] tpm: factor out tpm_startup function Tomas Winkler
2018-10-20 1:06 ` Jarkko Sakkinen
2018-10-19 18:22 ` [PATCH v7 13/21] tpm: add tpm_auto_startup() into tpm-interface.c Tomas Winkler
2018-10-20 1:09 ` Jarkko Sakkinen
2018-10-19 18:23 ` [PATCH v7 14/21] tpm: tpm-interface.c drop unused macros Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 15/21] tpm: tpm-space.c remove unneeded semicolon Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 16/21] tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 17/21] tpm1: implement tpm1_pcr_read_dev() " Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 18/21] tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read() Tomas Winkler
2018-10-23 18:44 ` Jarkko Sakkinen
2018-10-19 18:23 ` [PATCH v7 19/21] tpm1: reimplement SAVESTATE using tpm_buf Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 20/21] tpm1: reimplement tpm1_continue_selftest() " Tomas Winkler
2018-10-19 18:23 ` [PATCH v7 21/21] tpm: use u32 instead of int for PCR index Tomas Winkler
2018-10-23 18:44 ` Jarkko Sakkinen
2018-10-23 18:55 ` Jarkko Sakkinen
2018-10-23 18:56 ` Winkler, Tomas
2018-10-20 1:19 ` [PATCH v7 00/21] tpm: separate tpm 1.x and tpm 2.x commands Jarkko Sakkinen
2018-10-22 17:12 ` Winkler, Tomas
2018-10-23 13:14 ` Jarkko Sakkinen
2018-10-23 13:35 ` Winkler, Tomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181019182307.17745-6-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=tadeusz.struk@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.