From: Paul Cercueil <paul@crapouillou.net>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Ralf Baechle" <ralf@linux-mips.org>,
"Paul Burton" <paul.burton@mips.com>,
"James Hogan" <jhogan@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers
Date: Thu, 27 Dec 2018 19:13:12 +0100 [thread overview]
Message-ID: <20181227181319.31095-21-paul@crapouillou.net> (raw)
In-Reply-To: <20181227181319.31095-1-paul@crapouillou.net>
Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v5: New patch
v6: Fix register lengths in watchdog/pwm nodes
v7: No change
v8: - Fix wrong start address for PWM node
- Add system timer and clocksource sub-nodes
v9: Drop timer and clocksource sub-nodes
arch/mips/boot/dts/ingenic/jz4740.dtsi | 51 +++++++++++++++++++++++---
arch/mips/boot/dts/ingenic/jz4770.dtsi | 59 ++++++++++++++++++++++++++++++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 67 ++++++++++++++++++++++++++++++----
3 files changed, 164 insertions(+), 13 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 6fb16fd24035..b4ccca7204e8 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
@@ -45,12 +46,52 @@
#clock-cells = <1>;
};
- watchdog: watchdog@10002000 {
- compatible = "ingenic,jz4740-watchdog";
- reg = <0x10002000 0x10>;
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4740-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
- clocks = <&cgu JZ4740_CLK_RTC>;
- clock-names = "rtc";
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_RTC
+ &cgu JZ4740_CLK_EXT
+ &cgu JZ4740_CLK_PCLK
+ &cgu JZ4740_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23 22 21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0
+ &tcu TCU_CLK_TIMER1
+ &tcu TCU_CLK_TIMER2
+ &tcu TCU_CLK_TIMER3
+ &tcu TCU_CLK_TIMER4
+ &tcu TCU_CLK_TIMER5
+ &tcu TCU_CLK_TIMER6
+ &tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
};
rtc_dev: rtc@10003000 {
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 49ede6c14ff3..89c7a4b9773c 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
@@ -46,6 +47,64 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC
+ &cgu JZ4770_CLK_EXT
+ &cgu JZ4770_CLK_PCLK
+ &cgu JZ4770_CLK_EXT>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0
+ &tcu TCU_CLK_TIMER1
+ &tcu TCU_CLK_TIMER2
+ &tcu TCU_CLK_TIMER3
+ &tcu TCU_CLK_TIMER4
+ &tcu TCU_CLK_TIMER5
+ &tcu TCU_CLK_TIMER6
+ &tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b03cdec56de9..9f45c075b4f8 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/dma/jz4780-dma.h>
/ {
@@ -46,6 +47,64 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK
+ &cgu JZ4780_CLK_EXCLK
+ &cgu JZ4780_CLK_PCLK
+ &cgu JZ4780_CLK_EXCLK>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4780-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0
+ &tcu TCU_CLK_TIMER1
+ &tcu TCU_CLK_TIMER2
+ &tcu TCU_CLK_TIMER3
+ &tcu TCU_CLK_TIMER4
+ &tcu TCU_CLK_TIMER5
+ &tcu TCU_CLK_TIMER6
+ &tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4780-rtc";
reg = <0x10003000 0x4c>;
@@ -239,14 +298,6 @@
status = "disabled";
};
- watchdog: watchdog@10002000 {
- compatible = "ingenic,jz4780-watchdog";
- reg = <0x10002000 0x10>;
-
- clocks = <&cgu JZ4780_CLK_RTCLK>;
- clock-names = "rtc";
- };
-
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;
--
2.11.0
next prev parent reply other threads:[~2018-12-27 18:14 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-27 18:12 [PATCH v9 00/27] Ingenic TCU patchset v9 Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-12-28 21:48 ` Rob Herring
2018-12-28 21:48 ` Rob Herring
2018-12-27 18:12 ` [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-02-25 15:55 ` Daniel Lezcano
2019-02-25 22:59 ` Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 08/27] watchdog: jz4740: Use regmap " Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver Paul Cercueil
2019-01-05 19:42 ` Uwe Kleine-König
2019-01-05 20:46 ` Paul Cercueil
2019-01-05 21:18 ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 13/27] pwm: jz4740: Use clocks " Paul Cercueil
2019-01-05 19:45 ` Uwe Kleine-König
2019-01-05 20:52 ` Paul Cercueil
2019-01-05 21:19 ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation Paul Cercueil
2019-01-05 19:57 ` Uwe Kleine-König
2019-01-05 21:05 ` Paul Cercueil
2019-01-05 21:27 ` Uwe Kleine-König
2019-01-10 14:04 ` Paul Cercueil
2019-01-29 22:08 ` Stephen Boyd
2019-01-29 22:08 ` Stephen Boyd
2019-02-23 1:17 ` Paul Cercueil
2019-02-28 18:42 ` Stephen Boyd
2019-02-28 18:42 ` Stephen Boyd
2018-12-27 18:13 ` [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 18/27] clk: jz4740: Add TCU clock Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-12-27 18:13 ` Paul Cercueil [this message]
2018-12-27 18:13 ` [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181227181319.31095-21-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jhogan@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.