All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com,
	maarten.lankhorst@intel.com, dri-devel@lists.freedesktop.org
Subject: Re: [v15 4/4] drm/i915: Attach colorspace property and enable modeset
Date: Tue, 12 Feb 2019 19:02:00 +0200	[thread overview]
Message-ID: <20190212170200.GB20097@intel.com> (raw)
In-Reply-To: <1549650296-28648-5-git-send-email-uma.shankar@intel.com>

On Fri, Feb 08, 2019 at 11:54:56PM +0530, Uma Shankar wrote:
> This patch attaches the colorspace connector property to the
> hdmi connector. Based on colorspace change, modeset will be
> triggered to switch to new colorspace.
> 
> Based on colorspace property value create an infoframe
> with appropriate colorspace. This can be used to send an
> infoframe packet with proper colorspace value set which
> will help to enable wider color gamut like BT2020 on sink.
> 
> This patch attaches and enables HDMI colorspace, DP will be
> taken care separately.
> 
> v2: Merged the changes of creating infoframe as well to this
> patch as per Maarten's suggestion.
> 
> v3: Addressed review comments from Shashank. Separated HDMI
> and DP colorspaces as suggested by Ville and Maarten.
> 
> v4: Addressed Chris and Ville's review comments, and created a
> common colorspace property for DP and HDMI, filtered the list
> based on the colorspaces supported by the respective protocol
> standard. Handle the default case properly.
> 
> v5: Merged the DP handling along with platform colorspace
> handling as per Shashank's comments.
> 
> v6: Reverted to old design of exposing all colorspaces to
> userspace as per Ville's review comment
> 
> v7: Fixed a checkpatch complaint, Addressed  Maarten' review
> comment, updated the RB from Maarten and Jani's ack.
> 
> v8: Moved colorspace AVI Infoframe programming to drm core and
> removed from driver as per Ville's suggestion.
> 
> v9: Added a check to allow only RGB colorspaces to be set in
> infoframe through the colorspace property. Since there is no output
> csc property to control planar formats and it will be added later.
> Changes for RGB->YUV conversion inside driver without userspace
> knowledge is still supported. This is as per Ville's suggestion.
> 
> v10: Fixed an error in if check for rgb colorspace.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Acked-by: Jani Nikula <jani.nikula@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_atomic.c    | 24 ++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_connector.c |  8 ++++++++
>  drivers/gpu/drm/i915/intel_drv.h       |  1 +
>  drivers/gpu/drm/i915/intel_hdmi.c      | 13 +++++++++++++
>  4 files changed, 46 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index 7cf9290..ba60d51 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -102,6 +102,20 @@ int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
>  	return -EINVAL;
>  }
>  
> +static inline bool check_colorspace_is_rgb(u32 colorspace)
> +{
> +	if (colorspace | (DRM_MODE_COLORIMETRY_OPRGB |
> +			   DRM_MODE_COLORIMETRY_BT2020_RGB |
> +			   DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 |
> +			   DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER |
> +			   DRM_MODE_DP_COLORIMETRY_SRGB |
> +			   DRM_MODE_DP_COLORIMETRY_RGB_WIDE_GAMUT |
> +			   DRM_MODE_DP_COLORIMETRY_SCRGB))
> +		return true;

That's the same as

bool func(...)
{
	return true;
}

> +
> +	return false;
> +}
> +
>  int intel_digital_connector_atomic_check(struct drm_connector *conn,
>  					 struct drm_connector_state *new_state)
>  {
> @@ -118,6 +132,15 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
>  	if (!new_state->crtc)
>  		return 0;
>  
> +	/*
> +	 * Reject any planar formats, as currently not enabled.
> +	 * ToDo: Add a output CSC property interface to control planar
> +	 * formats.
> +	 */
> +	if ((new_conn_state->base.colorspace != DRM_MODE_COLORIMETRY_DEFAULT) ||
> +	    !check_colorspace_is_rgb(new_conn_state->base.colorspace))
> +		return 0;

Not sure what this stuff has to do with planar vs. not.

Either way, the code doesn't make sense.

> +
>  	crtc_state = drm_atomic_get_new_crtc_state(new_state->state, new_state->crtc);
>  
>  	/*
> @@ -126,6 +149,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
>  	 */
>  	if (new_conn_state->force_audio != old_conn_state->force_audio ||
>  	    new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
> +	    new_conn_state->base.colorspace != old_conn_state->base.colorspace ||
>  	    new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
>  	    new_conn_state->base.content_type != old_conn_state->base.content_type ||
>  	    new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
> diff --git a/drivers/gpu/drm/i915/intel_connector.c b/drivers/gpu/drm/i915/intel_connector.c
> index ee16758..8352d0b 100644
> --- a/drivers/gpu/drm/i915/intel_connector.c
> +++ b/drivers/gpu/drm/i915/intel_connector.c
> @@ -265,3 +265,11 @@ int intel_ddc_get_modes(struct drm_connector *connector,
>  			connector->dev->mode_config.aspect_ratio_property,
>  			DRM_MODE_PICTURE_ASPECT_NONE);
>  }
> +
> +void
> +intel_attach_colorspace_property(struct drm_connector *connector)
> +{
> +	if (!drm_mode_create_colorspace_property(connector))
> +		drm_object_attach_property(&connector->base,
> +					   connector->colorspace_property, 0);
> +}
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 5eb0b66..4af574f 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1803,6 +1803,7 @@ int intel_connector_update_modes(struct drm_connector *connector,
>  void intel_attach_force_audio_property(struct drm_connector *connector);
>  void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
>  void intel_attach_aspect_ratio_property(struct drm_connector *connector);
> +void intel_attach_colorspace_property(struct drm_connector *connector);
>  
>  /* intel_csr.c */
>  void intel_csr_ucode_init(struct drm_i915_private *);
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index f125a62..765718b 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -498,6 +498,8 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
>  	else
>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>  
> +	drm_hdmi_avi_infoframe_colorspace(&frame.avi, conn_state);
> +
>  	drm_hdmi_avi_infoframe_quant_range(&frame.avi,
>  					   conn_state->connector,
>  					   adjusted_mode,
> @@ -2143,10 +2145,21 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
>  intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> +	struct intel_digital_port *intel_dig_port =
> +				hdmi_to_dig_port(intel_hdmi);
>  
>  	intel_attach_force_audio_property(connector);
>  	intel_attach_broadcast_rgb_property(connector);
>  	intel_attach_aspect_ratio_property(connector);
> +
> +	/*
> +	 * Attach Colorspace property for Non LSPCON based device
> +	 * ToDo: This needs to be extended for LSPCON implementation
> +	 * as well. Will be implemented separately.
> +	 */
> +	if (!intel_dig_port->lspcon.active)
> +		intel_attach_colorspace_property(connector);
> +
>  	drm_connector_attach_content_type_property(connector);
>  	connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
>  
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-02-12 17:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-08 18:24 [v15 0/4] Add Colorspace connector property interface Uma Shankar
2019-02-08 18:09 ` ✗ Fi.CI.CHECKPATCH: warning for Add Colorspace connector property interface (rev14) Patchwork
2019-02-08 18:24 ` [v15 1/4] drm: Add HDMI colorspace property Uma Shankar
2019-02-08 18:24 ` [v15 2/4] drm: Add DP " Uma Shankar
2019-02-08 18:24 ` [v15 3/4] drm: Add colorspace info to AVI Infoframe Uma Shankar
2019-02-12 17:04   ` Ville Syrjälä
2019-02-12 21:30     ` Shankar, Uma via dri-devel
2019-02-13 11:04       ` Ville Syrjälä
2019-02-13 11:07         ` Shankar, Uma
2019-02-08 18:24 ` [v15 4/4] drm/i915: Attach colorspace property and enable modeset Uma Shankar
2019-02-12 17:02   ` Ville Syrjälä [this message]
2019-02-12 17:54     ` [Intel-gfx] " Shankar, Uma via dri-devel
2019-02-08 18:29 ` ✓ Fi.CI.BAT: success for Add Colorspace connector property interface (rev14) Patchwork
2019-02-08 22:47 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212170200.GB20097@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@intel.com \
    --cc=uma.shankar@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.