From: Rajendra Nayak <rnayak@codeaurora.org>
To: linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-serial@vger.kernel.org, linux-spi@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-scsi@vger.kernel.org,
swboyd@chromium.org, ulf.hansson@linaro.org,
viresh.kumar@linaro.org, dianders@chromium.org,
rafael@kernel.org, Rajendra Nayak <rnayak@codeaurora.org>
Subject: [RFC v2 05/11] arm64: dts: sdm845: Add OPP table for all qup devices
Date: Wed, 20 Mar 2019 15:19:12 +0530 [thread overview]
Message-ID: <20190320094918.20234-6-rnayak@codeaurora.org> (raw)
In-Reply-To: <20190320094918.20234-1-rnayak@codeaurora.org>
qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 115 +++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e4b69c74fe07..027ffe6e93e8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -409,6 +409,25 @@
clock-names = "core";
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@@ -430,6 +449,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -443,6 +464,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -454,6 +477,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -467,6 +492,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -480,6 +507,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -491,6 +520,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -504,6 +535,8 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -517,6 +550,8 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -528,6 +563,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -541,6 +578,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -554,6 +593,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -565,6 +606,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -578,6 +621,8 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -591,6 +636,8 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -602,6 +649,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -615,6 +664,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -628,6 +679,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -639,6 +692,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -652,6 +707,8 @@
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -665,6 +722,8 @@
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -676,6 +735,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -689,6 +750,8 @@
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -702,6 +765,8 @@
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -713,6 +778,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -738,6 +805,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -751,6 +820,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -762,6 +833,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -775,6 +848,8 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -788,6 +863,8 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -799,6 +876,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -812,6 +891,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -825,6 +906,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -836,6 +919,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -849,6 +934,8 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -862,6 +949,8 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -873,6 +962,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -886,6 +977,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -899,6 +992,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -910,6 +1005,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -923,6 +1020,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -936,6 +1035,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -947,6 +1048,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -960,6 +1063,8 @@
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -973,6 +1078,8 @@
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -984,6 +1091,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -997,6 +1106,8 @@
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1010,6 +1121,8 @@
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -1021,6 +1134,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2019-03-20 9:49 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-20 9:49 [RFC v2 00/11] DVFS in the OPP core Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 01/11] OPP: Don't overwrite rounded clk rate Rajendra Nayak
2019-06-11 10:54 ` Viresh Kumar
2019-06-12 7:42 ` Rajendra Nayak
2019-06-12 7:42 ` Rajendra Nayak
2019-06-12 8:25 ` Viresh Kumar
2019-06-13 9:54 ` Viresh Kumar
2019-06-14 5:27 ` Viresh Kumar
2019-06-17 3:50 ` Viresh Kumar
2019-06-17 4:07 ` Rajendra Nayak
2019-06-17 4:07 ` Rajendra Nayak
2019-06-17 4:17 ` Viresh Kumar
2019-06-17 4:25 ` Rajendra Nayak
2019-06-14 5:54 ` Rajendra Nayak
2019-06-14 5:54 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid Rajendra Nayak
2019-06-14 6:32 ` Viresh Kumar
2019-06-17 4:04 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 03/11] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2020-08-11 23:11 ` John Stultz
2020-08-11 23:11 ` John Stultz
2020-08-12 1:33 ` John Stultz
2020-08-12 1:33 ` John Stultz
2020-08-12 5:48 ` Rajendra Nayak
2020-08-12 5:48 ` Rajendra Nayak
2020-08-12 7:35 ` Amit Pundir
2020-08-12 7:35 ` Amit Pundir
2020-08-12 7:39 ` Rajendra Nayak
2020-08-12 7:39 ` Rajendra Nayak
2020-08-12 9:26 ` Rajendra Nayak
2020-08-12 9:26 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 04/11] spi: spi-geni-qcom: " Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak [this message]
2019-03-20 9:49 ` [RFC v2 06/11] scsi: ufs: Add support to manage multiple power domains in ufshcd-pltfrm Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 07/11] scsi: ufs: Add support for specifying OPP tables in DT Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 08/11] arm64: dts: sdm845: Add ufs opps and power-domains Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-05-14 7:53 ` Ulf Hansson
2019-03-20 9:49 ` [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-04-10 3:49 ` Viresh Kumar
2019-03-20 9:49 ` [RFC v2 10/11] drm/msm: dsi: " Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-03-20 9:49 ` [RFC v2 11/11] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak
2019-03-20 9:49 ` Rajendra Nayak
2019-04-10 3:51 ` [RFC v2 00/11] DVFS in the OPP core Viresh Kumar
2019-05-21 6:22 ` Viresh Kumar
2019-05-24 6:03 ` Rajendra Nayak
2019-05-24 6:03 ` Rajendra Nayak
2019-06-17 4:26 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190320094918.20234-6-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=swboyd@chromium.org \
--cc=ulf.hansson@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.