All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Matias Bjørling" <mb@lightnvm.io>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Igor Konopko" <igor.j.konopko@intel.com>,
	"Matias Bjørling" <mb@lightnvm.io>
Subject: [GIT PULL 17/26] lightnvm: pblk: propagate errors when reading meta
Date: Sat,  4 May 2019 20:38:02 +0200	[thread overview]
Message-ID: <20190504183811.18725-18-mb@lightnvm.io> (raw)
In-Reply-To: <20190504183811.18725-1-mb@lightnvm.io>

From: Igor Konopko <igor.j.konopko@intel.com>

Read errors are not correctly propagated. Errors are cleared before
returning control to the io submitter. Change the behaviour such that
all read errors exept high ecc read warning status is returned
appropriately.

Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
---
 drivers/lightnvm/pblk-core.c     | 9 +++++++--
 drivers/lightnvm/pblk-recovery.c | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index 39280c1e9b5d..38e26fe23138 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -761,8 +761,10 @@ int pblk_line_smeta_read(struct pblk *pblk, struct pblk_line *line)
 
 	atomic_dec(&pblk->inflight_io);
 
-	if (rqd.error)
+	if (rqd.error && rqd.error != NVM_RSP_WARN_HIGHECC) {
 		pblk_log_read_err(pblk, &rqd);
+		ret = -EIO;
+	}
 
 clear_rqd:
 	pblk_free_rqd_meta(pblk, &rqd);
@@ -916,8 +918,11 @@ int pblk_line_emeta_read(struct pblk *pblk, struct pblk_line *line,
 
 	atomic_dec(&pblk->inflight_io);
 
-	if (rqd.error)
+	if (rqd.error && rqd.error != NVM_RSP_WARN_HIGHECC) {
 		pblk_log_read_err(pblk, &rqd);
+		ret = -EIO;
+		goto free_rqd_dma;
+	}
 
 	emeta_buf += rq_len;
 	left_ppas -= rq_ppas;
diff --git a/drivers/lightnvm/pblk-recovery.c b/drivers/lightnvm/pblk-recovery.c
index 357e52980f2f..124d8179b2ad 100644
--- a/drivers/lightnvm/pblk-recovery.c
+++ b/drivers/lightnvm/pblk-recovery.c
@@ -458,7 +458,7 @@ static int pblk_recov_scan_oob(struct pblk *pblk, struct pblk_line *line,
 	atomic_dec(&pblk->inflight_io);
 
 	/* If a read fails, do a best effort by padding the line and retrying */
-	if (rqd->error) {
+	if (rqd->error && rqd->error != NVM_RSP_WARN_HIGHECC) {
 		int pad_distance, ret;
 
 		if (padded) {
-- 
2.19.1


  parent reply	other threads:[~2019-05-04 18:38 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-04 18:37 [GIT PULL 00/26] lightnvm updates for 5.2 Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 01/26] lightnvm: pblk: line reference fix in GC Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 02/26] lightnvm: pblk: rollback on error during gc read Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 03/26] lightnvm: pblk: reduce L2P memory footprint Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 04/26] lightnvm: pblk: remove unused smeta_ssec field Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 05/26] lightnvm: pblk: gracefully handle GC vmalloc fail Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 06/26] lightnvm: pblk: fix race during put line Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 07/26] lightnvm: pblk: ensure that erase is chunk aligned Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 08/26] lightnvm: pblk: cleanly fail when there is not enough memory Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 09/26] lightnvm: pblk: set proper read status in bio Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 10/26] lightnvm: Inherit mdts from the parent nvme device Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 11/26] lightnvm: pblk: fix bio leak when bio is split Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 12/26] lightnvm: pblk: set propper line as data_line after gc Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 13/26] lightnvm: prevent race condition on pblk remove Matias Bjørling
2019-05-04 18:37 ` [GIT PULL 14/26] lightnvm: pblk: fix lock order in pblk_rb_tear_down_check Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 15/26] lightnvm: pblk: kick writer on write recovery path Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 16/26] lightnvm: pblk: fix update line wp in OOB recovery Matias Bjørling
2019-05-04 18:38 ` Matias Bjørling [this message]
2019-05-04 18:38 ` [GIT PULL 18/26] lightnvm: pblk: wait for inflight IOs in recovery Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 19/26] lightnvm: pblk: remove internal IO timeout Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 20/26] lightnvm: pblk: GC error handling Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 21/26] lightnvm: pblk: IO path reorganization Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 22/26] lightnvm: pblk: recover only written metadata Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 23/26] lightnvm: track inflight target creations Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 24/26] lightnvm: do not remove instance under global lock Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 25/26] lightnvm: pblk: simplify partial read path Matias Bjørling
2019-05-04 18:38 ` [GIT PULL 26/26] lightnvm: pblk: use nvm_rq_to_ppa_list() Matias Bjørling
2019-05-06 16:20 ` [GIT PULL 00/26] lightnvm updates for 5.2 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190504183811.18725-18-mb@lightnvm.io \
    --to=mb@lightnvm.io \
    --cc=axboe@fb.com \
    --cc=igor.j.konopko@intel.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.