From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Igor Opaniuk <igor.opaniuk@toradex.com>,
Oleksandr Suvorov <oleksandr.suvorov@toradex.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Subject: [PATCH v1 0/6] VAG power control improvement for sgtl5000 codec
Date: Tue, 21 May 2019 13:36:13 +0300 [thread overview]
Message-ID: <20190521103619.4707-1-oleksandr.suvorov@toradex.com> (raw)
VAG power control is improved to fit the manual. This fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot
w/o playing any sound, the VAG power remains off that leads to poor
sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Also this series includes fixes of non-important bugs in sgtl5000 codec
driver.
Oleksandr Suvorov (6):
ASoC: sgtl5000: Fix definition of VAG Ramp Control
ASoC: sgtl5000: add ADC mute control
ASoC: sgtl5000: Fix of unmute outputs on probe
ASoC: sgtl5000: Fix charge pump source assignment
ASoC: Define a set of DAPM pre/post-up events
ASoC: sgtl5000: Improve VAG power and mute control
include/sound/soc-dapm.h | 2 +
sound/soc/codecs/sgtl5000.c | 250 ++++++++++++++++++++++++++++++------
sound/soc/codecs/sgtl5000.h | 2 +-
3 files changed, 212 insertions(+), 42 deletions(-)
--
2.20.1
--
Ciklum refers to one or more of Ciklum Group Holdings LTD. and its
subsidiaries and affiliates each of which is a legally separate entity.
Ciklum LLC is a limited liability company registered in Ukraine under
EDRPOU code 31902643, with its registered address at 12 Amosova St., 03680,
Kyiv, Ukraine.
The contents of this e-mail (including any attachments)
are confidential and may be legally privileged. If you are not the intended
recipient of this e-mail, please notify the sender immediately and then
delete it (including any attachments) from all your systems. Any
unauthorised use, reproduction, distribution, disclosure and/or
modification of this message and/or its contents are strictly prohibited.
We cannot guarantee that this e-mail is secure or error-free. Ciklum cannot
be held liable for any loss or damage caused by software viruses or
resulting from any use of or reliance on this email by anyone, other than
the intended addressee to the extent agreed in a contract for the matter to
which this email relates (if any). Messages sent to and from Ciklum may be
monitored; by replying to this e-mail you give your consent to such
monitoring. Notice: we do not accept service by e-mail of court
proceedings, other processes or formal notices of any kind without specific
prior written agreement. This email does not constitute a binding offer or
acceptance for Ciklum unless so set forth in a separate document.
next reply other threads:[~2019-05-21 10:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 10:36 Oleksandr Suvorov [this message]
2019-05-21 10:36 ` [PATCH v1 1/6] ASoC: sgtl5000: Fix definition of VAG Ramp Control Oleksandr Suvorov
2019-06-13 9:05 ` Marcel Ziswiler
2019-06-19 10:00 ` Oleksandr Suvorov
2019-06-24 11:10 ` Marcel Ziswiler
2019-05-21 10:36 ` [PATCH v1 2/6] ASoC: sgtl5000: add ADC mute control Oleksandr Suvorov
2019-06-13 9:05 ` Marcel Ziswiler
2019-05-21 10:36 ` [PATCH v1 3/6] ASoC: sgtl5000: Fix of unmute outputs on probe Oleksandr Suvorov
2019-06-13 9:05 ` Marcel Ziswiler
2019-05-21 10:36 ` [PATCH v1 4/6] ASoC: sgtl5000: Fix charge pump source assignment Oleksandr Suvorov
2019-06-13 9:06 ` Marcel Ziswiler
2019-05-21 10:36 ` [PATCH v1 5/6] ASoC: Define a set of DAPM pre/post-up events Oleksandr Suvorov
2019-06-13 9:06 ` Marcel Ziswiler
2019-06-13 9:06 ` Marcel Ziswiler
2019-05-21 10:36 ` [PATCH v1 6/6] ASoC: sgtl5000: Improve VAG power and mute control Oleksandr Suvorov
2019-06-13 9:06 ` Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190521103619.4707-1-oleksandr.suvorov@toradex.com \
--to=oleksandr.suvorov@toradex.com \
--cc=alsa-devel@alsa-project.org \
--cc=festevam@gmail.com \
--cc=igor.opaniuk@toradex.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.