From: Ezequiel Garcia <ezequiel@collabora.com>
To: linux-media@vger.kernel.org, Hans Verkuil <hans.verkuil@cisco.com>
Cc: kernel@collabora.com,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Tomasz Figa <tfiga@chromium.org>,
linux-rockchip@lists.infradead.org,
Heiko Stuebner <heiko@sntech.de>, Jonas Karlman <jonas@kwiboo.se>,
Philipp Zabel <p.zabel@pengutronix.de>,
Boris Brezillon <boris.brezillon@collabora.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Alexandre Courbot <acourbot@chromium.org>,
fbuergisser@chromium.org, linux-kernel@vger.kernel.org,
Pawel Osciak <posciak@chromium.org>,
Ezequiel Garcia <ezequiel@collabora.com>
Subject: [PATCH v4 2/4] media: uapi: Add VP8 stateless decoder API
Date: Thu, 11 Jul 2019 17:26:42 -0300 [thread overview]
Message-ID: <20190711202644.27909-3-ezequiel@collabora.com> (raw)
In-Reply-To: <20190711202644.27909-1-ezequiel@collabora.com>
From: Pawel Osciak <posciak@chromium.org>
Add the parsed VP8 frame pixel format and controls, to be used
with the new stateless decoder API for VP8 to provide parameters
for accelerator (aka stateless) codecs.
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
--
Changes from v3:
* s/VP8 FRAME/VP8 Frame
* Specify zeroing of padding fields in the documentation.
Changes from v2:
* Rename and document macroblock_bit_offset to first_part_header_bits.
* Document num_dct_part constraints.
Changes from v1:
* Move 1-bit fields to flags in the respective structures.
* Add padding fields to make all structures 8-byte aligned.
* Reorder fields where needed to avoid padding as much as possible.
* Fix documentation as needed.
Changes from RFC:
* Make sure the uAPI has the same size on x86, x86_64, arm and arm64.
* Move entropy coder state fields to a struct.
* Move key_frame field to the flags.
* Remove unneeded first_part_offset field.
* Add documentation.
---
Documentation/media/uapi/v4l/biblio.rst | 10 +
.../media/uapi/v4l/ext-ctrls-codec.rst | 323 ++++++++++++++++++
.../media/uapi/v4l/pixfmt-compressed.rst | 20 ++
drivers/media/v4l2-core/v4l2-ctrls.c | 10 +
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/media/v4l2-ctrls.h | 3 +
include/media/vp8-ctrls.h | 110 ++++++
7 files changed, 477 insertions(+)
create mode 100644 include/media/vp8-ctrls.h
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index 8f4eb8823d82..ad2ff258afa8 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -395,3 +395,13 @@ colimg
:title: Color Imaging: Fundamentals and Applications
:author: Erik Reinhard et al.
+
+.. _vp8:
+
+VP8
+===
+
+
+:title: RFC 6386: "VP8 Data Format and Decoding Guide"
+
+:author: J. Bankoski et al.
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
index d6ea2ffd65c5..c5f39dd50043 100644
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
@@ -2234,6 +2234,329 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
Quantization parameter for a P frame for FWHT. Valid range: from 1
to 31.
+.. _v4l2-mpeg-vp8:
+
+``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)``
+ Specifies the frame parameters for the associated VP8 parsed frame data.
+ This includes the necessary parameters for
+ configuring a stateless hardware decoding pipeline for VP8.
+ The bitstream parameters are defined according to :ref:`vp8`.
+
+ .. note::
+
+ This compound control is not yet part of the public kernel API and
+ it is expected to change.
+
+.. c:type:: v4l2_ctrl_vp8_frame_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_vp8_frame_header
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - struct :c:type:`v4l2_vp8_segment_header`
+ - ``segment_header``
+ - Structure with segment-based adjustments metadata.
+ * - struct :c:type:`v4l2_vp8_loopfilter_header`
+ - ``loopfilter_header``
+ - Structure with loop filter level adjustments metadata.
+ * - struct :c:type:`v4l2_vp8_quantization_header`
+ - ``quant_header``
+ - Structure with VP8 dequantization indices metadata.
+ * - struct :c:type:`v4l2_vp8_entropy_header`
+ - ``entropy_header``
+ - Structure with VP8 entropy coder probabilities metadata.
+ * - struct :c:type:`v4l2_vp8_entropy_coder_state`
+ - ``coder_state``
+ - Structure with VP8 entropy coder state.
+ * - __u16
+ - ``width``
+ - The width of the frame. Must be set for all frames.
+ * - __u16
+ - ``height``
+ - The height of the frame. Must be set for all frames.
+ * - __u8
+ - ``horizontal_scale``
+ - Horizontal scaling factor.
+ * - __u8
+ - ``vertical_scaling factor``
+ - Vertical scale.
+ * - __u8
+ - ``version``
+ - Bitstream version.
+ * - __u8
+ - ``prob_skip_false``
+ - Indicates the probability that the macroblock is not skipped.
+ * - __u8
+ - ``prob_intra``
+ - Indicates the probability that a macroblock is intra-predicted.
+ * - __u8
+ - ``prob_last``
+ - Indicates the probability that the last reference frame is used
+ for inter-prediction
+ * - __u8
+ - ``prob_gf``
+ - Indicates the probability that the golden reference frame is used
+ for inter-prediction
+ * - __u8
+ - ``num_dct_parts``
+ - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8.
+ * - __u32
+ - ``first_part_size``
+ - Size of the first partition, i.e. the control partition.
+ * - __u32
+ - ``first_part_header_bits``
+ - Size in bits of the first partition header portion.
+ * - __u32
+ - ``dct_part_sizes[8]``
+ - DCT coefficients sizes.
+ * - __u64
+ - ``last_frame_ts``
+ - Timestamp for the V4L2 capture buffer to use as last reference frame, used
+ with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+ struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+ function to convert the struct :c:type:`timeval` in struct
+ :c:type:`v4l2_buffer` to a __u64.
+ * - __u64
+ - ``golden_frame_ts``
+ - Timestamp for the V4L2 capture buffer to use as last reference frame, used
+ with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+ struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+ function to convert the struct :c:type:`timeval` in struct
+ :c:type:`v4l2_buffer` to a __u64.
+ * - __u64
+ - ``alt_frame_ts``
+ - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used
+ with inter-coded frames. The timestamp refers to the ``timestamp`` field in
+ struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()`
+ function to convert the struct :c:type:`timeval` in struct
+ :c:type:`v4l2_buffer` to a __u64.
+ * - __u64
+ - ``flags``
+ - See :ref:`Frame Header Flags <vp8_frame_header_flags>`
+
+.. _vp8_frame_header_flags:
+
+``Frame Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME``
+ - 0x01
+ - Indicates if the frame is a key frame.
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL``
+ - 0x02
+ - Experimental bitstream.
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME``
+ - 0x04
+ - Show frame flag, indicates if the frame is for display.
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF``
+ - 0x08
+ - Enable/disable skipping of macroblocks with no non-zero coefficients.
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN``
+ - 0x10
+ - Sign of motion vectors when the golden frame is referenced.
+ * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT``
+ - 0x20
+ - Sign of motion vectors when the alt frame is referenced.
+
+.. c:type:: v4l2_vp8_entropy_coder_state
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_entropy_coder_state
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``range``
+ -
+ * - __u8
+ - ``value``
+ -
+ * - __u8
+ - ``bit_count``
+ -
+ * - __u8
+ - ``padding``
+ - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_vp8_segment_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_segment_header
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __s8
+ - ``quant_update[4]``
+ - Signed quantizer value update.
+ * - __s8
+ - ``lf_update[4]``
+ - Signed loop filter level value update.
+ * - __u8
+ - ``segment_probs[3]``
+ - Segment probabilities.
+ * - __u8
+ - ``padding``
+ - Applications and drivers must set this to zero.
+ * - __u32
+ - ``flags``
+ - See :ref:`Segment Header Flags <vp8_segment_header_flags>`
+
+.. _vp8_segment_header_flags:
+
+``Segment Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED``
+ - 0x01
+ - Enable/disable segment-based adjustments.
+ * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP``
+ - 0x02
+ - Indicates if the macroblock segmentation map is updated in this frame.
+ * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA``
+ - 0x04
+ - Indicates if the segment feature data is updated in this frame.
+ * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE``
+ - 0x08
+ - If is set, the segment feature data mode is delta-value.
+ If cleared, it's absolute-value.
+
+.. c:type:: v4l2_vp8_loopfilter_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_loopfilter_header
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __s8
+ - ``ref_frm_delta[4]``
+ - Reference adjustment (signed) delta value.
+ * - __s8
+ - ``mb_mode_delta[4]``
+ - Macroblock prediction mode adjustment (signed) delta value.
+ * - __u8
+ - ``sharpness_level``
+ - Sharpness level
+ * - __u8
+ - ``level``
+ - Filter level
+ * - __u16
+ - ``padding``
+ - Applications and drivers must set this to zero.
+ * - __u32
+ - ``flags``
+ - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>`
+
+.. _vp8_loopfilter_header_flags:
+
+``Loopfilter Header Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE``
+ - 0x01
+ - Enable/disable macroblock-level loop filter adjustment.
+ * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE``
+ - 0x02
+ - Indicates if the delta values used in an adjustment are updated.
+ * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE``
+ - 0x04
+ - If set, indicates the filter type is simple.
+ If cleared, the filter type is normal.
+
+.. c:type:: v4l2_vp8_quantization_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_quantization_header
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``y_ac_qi``
+ - Luma AC coefficient table index.
+ * - __s8
+ - ``y_dc_delta``
+ - Luma DC delta vaue.
+ * - __s8
+ - ``y2_dc_delta``
+ - Y2 block DC delta value.
+ * - __s8
+ - ``y2_ac_delta``
+ - Y2 block AC delta value.
+ * - __s8
+ - ``uv_dc_delta``
+ - Chroma DC delta value.
+ * - __s8
+ - ``uv_ac_delta``
+ - Chroma AC delta value.
+ * - __u16
+ - ``padding``
+ - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_vp8_entropy_header
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+
+.. flat-table:: struct v4l2_vp8_entropy_header
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``coeff_probs[4][8][3][11]``
+ - Coefficient update probabilities.
+ * - __u8
+ - ``y_mode_probs[4]``
+ - Luma mode update probabilities.
+ * - __u8
+ - ``uv_mode_probs[3]``
+ - Chroma mode update probabilities.
+ * - __u8
+ - ``mv_probs[2][19]``
+ - MV decoding update probabilities.
+ * - __u8
+ - ``padding[3]``
+ - Applications and drivers must set this to zero.
+
.. raw:: latex
\normalsize
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
index 4b701fc7653e..f52a7b67023d 100644
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
@@ -133,6 +133,26 @@ Compressed Formats
- ``V4L2_PIX_FMT_VP8``
- 'VP80'
- VP8 video elementary stream.
+ * .. _V4L2-PIX-FMT-VP8-FRAME:
+
+ - ``V4L2_PIX_FMT_VP8_FRAME``
+ - 'VP8F'
+ - VP8 parsed frame, as extracted from the container.
+ This format is adapted for stateless video decoders that implement a
+ VP8 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
+ Metadata associated with the frame to decode is required to be passed
+ through the ``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER`` control.
+ See the :ref:`associated Codec Control IDs <v4l2-mpeg-vp8>`.
+ Exactly one output and one capture buffer must be provided for use with
+ this pixel format. The output buffer must contain the appropriate number
+ of macroblocks to decode a full corresponding frame to the matching
+ capture buffer.
+
+ .. note::
+
+ This format is not yet part of the public kernel API and it
+ is expected to change.
+
* .. _V4L2-PIX-FMT-VP9:
- ``V4L2_PIX_FMT_VP9``
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 739418aa9108..b2c9f5816c4a 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -885,6 +885,7 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value";
case V4L2_CID_MPEG_VIDEO_VP8_PROFILE: return "VP8 Profile";
case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile";
+ case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER: return "VP8 Frame Header";
/* HEVC controls */
case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value";
@@ -1345,6 +1346,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:
*type = V4L2_CTRL_TYPE_H264_DECODE_PARAMS;
break;
+ case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:
+ *type = V4L2_CTRL_TYPE_VP8_FRAME_HEADER;
+ break;
default:
*type = V4L2_CTRL_TYPE_INTEGER;
break;
@@ -1690,6 +1694,9 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
break;
+
+ case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
+ break;
default:
return -EINVAL;
}
@@ -2360,6 +2367,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
elem_size = sizeof(struct v4l2_ctrl_h264_decode_params);
break;
+ case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
+ elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
+ break;
default:
if (type < V4L2_CTRL_COMPOUND_TYPES)
elem_size = sizeof(s32);
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index b1f4b991dba6..c560d942c766 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1331,6 +1331,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
case V4L2_PIX_FMT_VC1_ANNEX_G: descr = "VC-1 (SMPTE 412M Annex G)"; break;
case V4L2_PIX_FMT_VC1_ANNEX_L: descr = "VC-1 (SMPTE 412M Annex L)"; break;
case V4L2_PIX_FMT_VP8: descr = "VP8"; break;
+ case V4L2_PIX_FMT_VP8_FRAME: descr = "VP8 Frame"; break;
case V4L2_PIX_FMT_VP9: descr = "VP9"; break;
case V4L2_PIX_FMT_HEVC: descr = "HEVC"; break; /* aka H.265 */
case V4L2_PIX_FMT_FWHT: descr = "FWHT"; break; /* used in vicodec */
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index b4433483af23..6e9dc9c44bb1 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -20,6 +20,7 @@
#include <media/mpeg2-ctrls.h>
#include <media/fwht-ctrls.h>
#include <media/h264-ctrls.h>
+#include <media/vp8-ctrls.h>
/* forward references */
struct file;
@@ -48,6 +49,7 @@ struct poll_table_struct;
* @p_h264_scaling_matrix: Pointer to a struct v4l2_ctrl_h264_scaling_matrix.
* @p_h264_slice_params: Pointer to a struct v4l2_ctrl_h264_slice_params.
* @p_h264_decode_params: Pointer to a struct v4l2_ctrl_h264_decode_params.
+ * @p_vp8_frame_header: Pointer to a VP8 frame header structure.
* @p: Pointer to a compound value.
*/
union v4l2_ctrl_ptr {
@@ -65,6 +67,7 @@ union v4l2_ctrl_ptr {
struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix;
struct v4l2_ctrl_h264_slice_params *p_h264_slice_params;
struct v4l2_ctrl_h264_decode_params *p_h264_decode_params;
+ struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header;
void *p;
};
diff --git a/include/media/vp8-ctrls.h b/include/media/vp8-ctrls.h
new file mode 100644
index 000000000000..6cc2eeea4c90
--- /dev/null
+++ b/include/media/vp8-ctrls.h
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * These are the VP8 state controls for use with stateless VP8
+ * codec drivers.
+ *
+ * It turns out that these structs are not stable yet and will undergo
+ * more changes. So keep them private until they are stable and ready to
+ * become part of the official public API.
+ */
+
+#ifndef _VP8_CTRLS_H_
+#define _VP8_CTRLS_H_
+
+#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F')
+
+#define V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (V4L2_CID_MPEG_BASE + 2000)
+#define V4L2_CTRL_TYPE_VP8_FRAME_HEADER 0x301
+
+#define V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED 0x01
+#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP 0x02
+#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA 0x04
+#define V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE 0x08
+
+struct v4l2_vp8_segment_header {
+ __s8 quant_update[4];
+ __s8 lf_update[4];
+ __u8 segment_probs[3];
+ __u8 padding;
+ __u32 flags;
+};
+
+#define V4L2_VP8_LF_HEADER_ADJ_ENABLE 0x01
+#define V4L2_VP8_LF_HEADER_DELTA_UPDATE 0x02
+#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04
+struct v4l2_vp8_loopfilter_header {
+ __s8 ref_frm_delta[4];
+ __s8 mb_mode_delta[4];
+ __u8 sharpness_level;
+ __u8 level;
+ __u16 padding;
+ __u32 flags;
+};
+
+struct v4l2_vp8_quantization_header {
+ __u8 y_ac_qi;
+ __s8 y_dc_delta;
+ __s8 y2_dc_delta;
+ __s8 y2_ac_delta;
+ __s8 uv_dc_delta;
+ __s8 uv_ac_delta;
+ __u16 padding;
+};
+
+struct v4l2_vp8_entropy_header {
+ __u8 coeff_probs[4][8][3][11];
+ __u8 y_mode_probs[4];
+ __u8 uv_mode_probs[3];
+ __u8 mv_probs[2][19];
+ __u8 padding[3];
+};
+
+struct v4l2_vp8_entropy_coder_state {
+ __u8 range;
+ __u8 value;
+ __u8 bit_count;
+ __u8 padding;
+};
+
+#define V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME 0x01
+#define V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL 0x02
+#define V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME 0x04
+#define V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF 0x08
+#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN 0x10
+#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT 0x20
+
+#define VP8_FRAME_IS_KEY_FRAME(hdr) \
+ (!!((hdr)->flags & V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME))
+
+struct v4l2_ctrl_vp8_frame_header {
+ struct v4l2_vp8_segment_header segment_header;
+ struct v4l2_vp8_loopfilter_header lf_header;
+ struct v4l2_vp8_quantization_header quant_header;
+ struct v4l2_vp8_entropy_header entropy_header;
+ struct v4l2_vp8_entropy_coder_state coder_state;
+
+ __u16 width;
+ __u16 height;
+
+ __u8 horizontal_scale;
+ __u8 vertical_scale;
+
+ __u8 version;
+ __u8 prob_skip_false;
+ __u8 prob_intra;
+ __u8 prob_last;
+ __u8 prob_gf;
+ __u8 num_dct_parts;
+
+ __u32 first_part_size;
+ __u32 first_part_header_bits;
+ __u32 dct_part_sizes[8];
+
+ __u64 last_frame_ts;
+ __u64 golden_frame_ts;
+ __u64 alt_frame_ts;
+
+ __u64 flags;
+};
+
+#endif
--
2.20.1
next prev parent reply other threads:[~2019-07-11 20:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 20:26 [PATCH v4 0/4] RK3288 VP8 decoding support Ezequiel Garcia
2019-07-11 20:26 ` [PATCH v4 1/4] media: v4l2-ctrl: Move compound control validation Ezequiel Garcia
2019-07-11 20:26 ` Ezequiel Garcia [this message]
2019-07-11 20:26 ` [PATCH v4 3/4] media: v4l2-ctrl: Validate VP8 stateless decoder controls Ezequiel Garcia
2019-07-11 20:26 ` [PATCH v4 4/4] media: hantro: Add support for VP8 decoding on rk3288 Ezequiel Garcia
2019-07-11 20:26 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190711202644.27909-3-ezequiel@collabora.com \
--to=ezequiel@collabora.com \
--cc=acourbot@chromium.org \
--cc=boris.brezillon@collabora.com \
--cc=fbuergisser@chromium.org \
--cc=hans.verkuil@cisco.com \
--cc=heiko@sntech.de \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=paul.kocialkowski@bootlin.com \
--cc=posciak@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.