From: Ezequiel Garcia <ezequiel@collabora.com>
To: linux-media@vger.kernel.org, Hans Verkuil <hans.verkuil@cisco.com>
Cc: kernel@collabora.com,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Tomasz Figa <tfiga@chromium.org>,
linux-rockchip@lists.infradead.org,
Heiko Stuebner <heiko@sntech.de>, Jonas Karlman <jonas@kwiboo.se>,
Philipp Zabel <p.zabel@pengutronix.de>,
Boris Brezillon <boris.brezillon@collabora.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Alexandre Courbot <acourbot@chromium.org>,
fbuergisser@chromium.org, linux-kernel@vger.kernel.org,
Ezequiel Garcia <ezequiel@collabora.com>
Subject: [PATCH v2 5/7] media: hantro: Add helpers to prepare/finish a run
Date: Thu, 25 Jul 2019 11:17:54 -0300 [thread overview]
Message-ID: <20190725141756.2518-6-ezequiel@collabora.com> (raw)
In-Reply-To: <20190725141756.2518-1-ezequiel@collabora.com>
From: Boris Brezillon <boris.brezillon@collabora.com>
And use them where appropriate.
We might want to move hantro_{prepare,finish}_run() calls to
device_run() and have a 2-step approach similar to cedrus (prepare +
trigger) at some point, but let's keep that for later.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
Changes from v1:
* Remove unused variable.
---
drivers/staging/media/hantro/hantro_drv.c | 22 +++++++++++++++++++
.../media/hantro/hantro_g1_mpeg2_dec.c | 10 ++-------
.../staging/media/hantro/hantro_g1_vp8_dec.c | 11 ++--------
.../staging/media/hantro/hantro_h1_jpeg_enc.c | 7 ++++--
drivers/staging/media/hantro/hantro_hw.h | 2 ++
.../media/hantro/rk3399_vpu_hw_jpeg_enc.c | 8 ++-----
.../media/hantro/rk3399_vpu_hw_mpeg2_dec.c | 10 ++-------
7 files changed, 37 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 398618b0d586..4af6ee80229e 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -153,6 +153,28 @@ void hantro_watchdog(struct work_struct *work)
}
}
+void hantro_prepare_run(struct hantro_ctx *ctx)
+{
+ struct vb2_v4l2_buffer *src_buf;
+
+ src_buf = hantro_get_src_buf(ctx);
+ v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req,
+ &ctx->ctrl_handler);
+}
+
+void hantro_finish_run(struct hantro_ctx *ctx)
+{
+ struct vb2_v4l2_buffer *src_buf;
+
+ src_buf = hantro_get_src_buf(ctx);
+ v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
+ &ctx->ctrl_handler);
+
+ /* Kick the watchdog. */
+ schedule_delayed_work(&ctx->dev->watchdog_work,
+ msecs_to_jiffies(2000));
+}
+
static void device_run(void *priv)
{
struct hantro_ctx *ctx = priv;
diff --git a/drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c b/drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c
index 55f861e96108..80f0e94f8afa 100644
--- a/drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c
@@ -171,8 +171,7 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
dst_buf = hantro_get_dst_buf(ctx);
/* Apply request controls if any */
- v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
+ hantro_prepare_run(ctx);
slice_params = hantro_get_ctrl(ctx,
V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS);
@@ -248,12 +247,7 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
&dst_buf->vb2_buf,
sequence, picture, slice_params);
- /* Controls no longer in-use, we can complete them */
- v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
-
- /* Kick the watchdog and start decoding */
- schedule_delayed_work(&vpu->watchdog_work, msecs_to_jiffies(2000));
+ hantro_finish_run(ctx);
reg = G1_REG_DEC_E(1);
vdpu_write(vpu, reg, G1_SWREG(1));
diff --git a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
index 6032cbbecb06..cd1fbd3a0d5f 100644
--- a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
@@ -449,13 +449,10 @@ void hantro_g1_vp8_dec_run(struct hantro_ctx *ctx)
struct hantro_dev *vpu = ctx->dev;
size_t height = ctx->dst_fmt.height;
size_t width = ctx->dst_fmt.width;
- struct vb2_v4l2_buffer *vb2_src;
u32 mb_width, mb_height;
u32 reg;
- vb2_src = hantro_get_src_buf(ctx);
- v4l2_ctrl_request_setup(vb2_src->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
+ hantro_prepare_run(ctx);
hdr = hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER);
if (WARN_ON(!hdr))
@@ -516,11 +513,7 @@ void hantro_g1_vp8_dec_run(struct hantro_ctx *ctx)
cfg_ref(ctx, hdr);
cfg_buffers(ctx, hdr);
- /* Controls no longer in-use, we can complete them */
- v4l2_ctrl_request_complete(vb2_src->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
-
- schedule_delayed_work(&vpu->watchdog_work, msecs_to_jiffies(2000));
+ hantro_finish_run(ctx);
vdpu_write(vpu, G1_REG_INTERRUPT_DEC_E, G1_REG_INTERRUPT);
}
diff --git a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
index f5adb5cbde50..ecd34a7db190 100644
--- a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
+++ b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
@@ -87,6 +87,8 @@ void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
src_buf = hantro_get_src_buf(ctx);
dst_buf = hantro_get_dst_buf(ctx);
+ hantro_prepare_run(ctx);
+
memset(&jpeg_ctx, 0, sizeof(jpeg_ctx));
jpeg_ctx.buffer = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
jpeg_ctx.width = ctx->dst_fmt.width;
@@ -119,7 +121,8 @@ void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
| H1_REG_ENC_CTRL_ENC_MODE_JPEG
| H1_REG_ENC_PIC_INTRA
| H1_REG_ENC_CTRL_EN_BIT;
- /* Kick the watchdog and start encoding */
- schedule_delayed_work(&vpu->watchdog_work, msecs_to_jiffies(2000));
+
+ hantro_finish_run(ctx);
+
vepu_write(vpu, reg, H1_REG_ENC_CTRL);
}
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 7849852affde..34ef24e3a9ef 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -97,6 +97,8 @@ void hantro_watchdog(struct work_struct *work);
void hantro_run(struct hantro_ctx *ctx);
void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
enum vb2_buffer_state result);
+void hantro_prepare_run(struct hantro_ctx *ctx);
+void hantro_finish_run(struct hantro_ctx *ctx);
void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx);
void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx);
diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw_jpeg_enc.c b/drivers/staging/media/hantro/rk3399_vpu_hw_jpeg_enc.c
index 82c5af822766..06162f569b5e 100644
--- a/drivers/staging/media/hantro/rk3399_vpu_hw_jpeg_enc.c
+++ b/drivers/staging/media/hantro/rk3399_vpu_hw_jpeg_enc.c
@@ -113,14 +113,12 @@ void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx)
struct hantro_dev *vpu = ctx->dev;
struct vb2_v4l2_buffer *src_buf, *dst_buf;
struct hantro_jpeg_ctx jpeg_ctx;
- struct media_request *src_req;
u32 reg;
src_buf = hantro_get_src_buf(ctx);
dst_buf = hantro_get_dst_buf(ctx);
- src_req = src_buf->vb2_buf.req_obj.req;
- v4l2_ctrl_request_setup(src_req, &ctx->ctrl_handler);
+ hantro_prepare_run(ctx);
memset(&jpeg_ctx, 0, sizeof(jpeg_ctx));
jpeg_ctx.buffer = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
@@ -157,9 +155,7 @@ void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx)
| VEPU_REG_ENCODE_FORMAT_JPEG
| VEPU_REG_ENCODE_ENABLE;
- v4l2_ctrl_request_complete(src_req, &ctx->ctrl_handler);
-
/* Kick the watchdog and start encoding */
- schedule_delayed_work(&vpu->watchdog_work, msecs_to_jiffies(2000));
+ hantro_finish_run(ctx);
vepu_write(vpu, reg, VEPU_REG_ENCODE_START);
}
diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c b/drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c
index 451bfcceadba..e7ba5c0441cc 100644
--- a/drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c
+++ b/drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c
@@ -172,9 +172,7 @@ void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx)
src_buf = hantro_get_src_buf(ctx);
dst_buf = hantro_get_dst_buf(ctx);
- /* Apply request controls if any */
- v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
+ hantro_prepare_run(ctx);
slice_params = hantro_get_ctrl(ctx,
V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS);
@@ -254,12 +252,8 @@ void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx)
&dst_buf->vb2_buf,
sequence, picture, slice_params);
- /* Controls no longer in-use, we can complete them */
- v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
- &ctx->ctrl_handler);
-
/* Kick the watchdog and start decoding */
- schedule_delayed_work(&vpu->watchdog_work, msecs_to_jiffies(2000));
+ hantro_finish_run(ctx);
reg = vdpu_read(vpu, VDPU_SWREG(57)) | VDPU_REG_DEC_E(1);
vdpu_write(vpu, reg, VDPU_SWREG(57));
--
2.22.0
next prev parent reply other threads:[~2019-07-25 14:18 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 14:17 [PATCH v2 0/7] hantro: Add RK3399 VP8 decoding support Ezequiel Garcia
2019-07-25 14:17 ` [PATCH v2 1/7] media: hantro: Set DMA max segment size Ezequiel Garcia
2019-07-25 15:36 ` Philipp Zabel
2019-07-25 15:41 ` Tomasz Figa
2019-07-25 14:17 ` [PATCH v2 2/7] media: hantro: Simplify the controls creation logic Ezequiel Garcia
2019-07-25 14:17 ` [PATCH v2 3/7] media: hantro: Constify the control array Ezequiel Garcia
2019-07-25 14:17 ` [PATCH v2 4/7] media: hantro: Add hantro_get_{src,dst}_buf() helpers Ezequiel Garcia
2019-07-25 14:17 ` Ezequiel Garcia [this message]
2019-07-25 14:17 ` [PATCH v2 6/7] media: hantro: Move VP8 common code Ezequiel Garcia
2019-07-25 14:17 ` Ezequiel Garcia
2019-07-25 16:22 ` Mauro Carvalho Chehab
2019-07-25 16:30 ` Ezequiel Garcia
2019-07-25 16:38 ` Mauro Carvalho Chehab
2019-07-25 17:25 ` Ezequiel Garcia
2019-07-25 14:17 ` [PATCH v2 7/7] media: hantro: Support RK3399 VP8 decoding Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190725141756.2518-6-ezequiel@collabora.com \
--to=ezequiel@collabora.com \
--cc=acourbot@chromium.org \
--cc=boris.brezillon@collabora.com \
--cc=fbuergisser@chromium.org \
--cc=hans.verkuil@cisco.com \
--cc=heiko@sntech.de \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=paul.kocialkowski@bootlin.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.