From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 11/18] drm/i915/overlay: Switch to using i915_active tracking
Date: Mon, 12 Aug 2019 14:39:08 +0100 [thread overview]
Message-ID: <20190812133915.18824-11-chris@chris-wilson.co.uk> (raw)
In-Reply-To: <20190812133915.18824-1-chris@chris-wilson.co.uk>
Remove the raw i915_active_request tracking in favour of the higher
level i915_active tracking for the sole purpose of making the lockless
transition easier in later patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
drivers/gpu/drm/i915/display/intel_overlay.c | 129 +++++++++----------
drivers/gpu/drm/i915/i915_active.h | 19 ---
2 files changed, 64 insertions(+), 84 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index 4d3b2086570e..4f78586ee05e 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -191,7 +191,8 @@ struct intel_overlay {
struct overlay_registers __iomem *regs;
u32 flip_addr;
/* flip handling */
- struct i915_active_request last_flip;
+ struct i915_active last_flip;
+ void (*flip_complete)(struct intel_overlay *ovl);
};
static void i830_overlay_clock_gating(struct drm_i915_private *dev_priv,
@@ -217,30 +218,25 @@ static void i830_overlay_clock_gating(struct drm_i915_private *dev_priv,
PCI_DEVFN(0, 0), I830_CLOCK_GATE, val);
}
-static void intel_overlay_submit_request(struct intel_overlay *overlay,
- struct i915_request *rq,
- i915_active_retire_fn retire)
+static struct i915_request *
+alloc_request(struct intel_overlay *overlay, void (*fn)(struct intel_overlay *))
{
- GEM_BUG_ON(i915_active_request_peek(&overlay->last_flip,
- &overlay->i915->drm.struct_mutex));
- i915_active_request_set_retire_fn(&overlay->last_flip, retire,
- &overlay->i915->drm.struct_mutex);
- __i915_active_request_set(&overlay->last_flip, rq);
- i915_request_add(rq);
-}
+ struct i915_request *rq;
+ int err;
-static int intel_overlay_do_wait_request(struct intel_overlay *overlay,
- struct i915_request *rq,
- i915_active_retire_fn retire)
-{
- intel_overlay_submit_request(overlay, rq, retire);
- return i915_active_request_retire(&overlay->last_flip,
- &overlay->i915->drm.struct_mutex);
-}
+ overlay->flip_complete = fn;
-static struct i915_request *alloc_request(struct intel_overlay *overlay)
-{
- return i915_request_create(overlay->context);
+ rq = i915_request_create(overlay->context);
+ if (IS_ERR(rq))
+ return rq;
+
+ err = i915_active_ref(&overlay->last_flip, rq->fence.context, rq);
+ if (err) {
+ i915_request_add(rq);
+ return ERR_PTR(err);
+ }
+
+ return rq;
}
/* overlay needs to be disable in OCMD reg */
@@ -252,7 +248,7 @@ static int intel_overlay_on(struct intel_overlay *overlay)
WARN_ON(overlay->active);
- rq = alloc_request(overlay);
+ rq = alloc_request(overlay, NULL);
if (IS_ERR(rq))
return PTR_ERR(rq);
@@ -273,7 +269,9 @@ static int intel_overlay_on(struct intel_overlay *overlay)
*cs++ = MI_NOOP;
intel_ring_advance(rq, cs);
- return intel_overlay_do_wait_request(overlay, rq, NULL);
+ i915_request_add(rq);
+
+ return i915_active_wait(&overlay->last_flip);
}
static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
@@ -317,7 +315,7 @@ static int intel_overlay_continue(struct intel_overlay *overlay,
if (tmp & (1 << 17))
DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp);
- rq = alloc_request(overlay);
+ rq = alloc_request(overlay, NULL);
if (IS_ERR(rq))
return PTR_ERR(rq);
@@ -332,8 +330,7 @@ static int intel_overlay_continue(struct intel_overlay *overlay,
intel_ring_advance(rq, cs);
intel_overlay_flip_prepare(overlay, vma);
-
- intel_overlay_submit_request(overlay, rq, NULL);
+ i915_request_add(rq);
return 0;
}
@@ -354,20 +351,13 @@ static void intel_overlay_release_old_vma(struct intel_overlay *overlay)
}
static void
-intel_overlay_release_old_vid_tail(struct i915_active_request *active,
- struct i915_request *rq)
+intel_overlay_release_old_vid_tail(struct intel_overlay *overlay)
{
- struct intel_overlay *overlay =
- container_of(active, typeof(*overlay), last_flip);
-
intel_overlay_release_old_vma(overlay);
}
-static void intel_overlay_off_tail(struct i915_active_request *active,
- struct i915_request *rq)
+static void intel_overlay_off_tail(struct intel_overlay *overlay)
{
- struct intel_overlay *overlay =
- container_of(active, typeof(*overlay), last_flip);
struct drm_i915_private *dev_priv = overlay->i915;
intel_overlay_release_old_vma(overlay);
@@ -380,6 +370,16 @@ static void intel_overlay_off_tail(struct i915_active_request *active,
i830_overlay_clock_gating(dev_priv, true);
}
+static void
+intel_overlay_last_flip_retire(struct i915_active *active)
+{
+ struct intel_overlay *overlay =
+ container_of(active, typeof(*overlay), last_flip);
+
+ if (overlay->flip_complete)
+ overlay->flip_complete(overlay);
+}
+
/* overlay needs to be disabled in OCMD reg */
static int intel_overlay_off(struct intel_overlay *overlay)
{
@@ -394,7 +394,7 @@ static int intel_overlay_off(struct intel_overlay *overlay)
* of the hw. Do it in both cases */
flip_addr |= OFC_UPDATE;
- rq = alloc_request(overlay);
+ rq = alloc_request(overlay, intel_overlay_off_tail);
if (IS_ERR(rq))
return PTR_ERR(rq);
@@ -417,17 +417,16 @@ static int intel_overlay_off(struct intel_overlay *overlay)
intel_ring_advance(rq, cs);
intel_overlay_flip_prepare(overlay, NULL);
+ i915_request_add(rq);
- return intel_overlay_do_wait_request(overlay, rq,
- intel_overlay_off_tail);
+ return i915_active_wait(&overlay->last_flip);
}
/* recover from an interruption due to a signal
* We have to be careful not to repeat work forever an make forward progess. */
static int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay)
{
- return i915_active_request_retire(&overlay->last_flip,
- &overlay->i915->drm.struct_mutex);
+ return i915_active_wait(&overlay->last_flip);
}
/* Wait for pending overlay flip and release old frame.
@@ -437,43 +436,40 @@ static int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay)
static int intel_overlay_release_old_vid(struct intel_overlay *overlay)
{
struct drm_i915_private *dev_priv = overlay->i915;
+ struct i915_request *rq;
u32 *cs;
- int ret;
lockdep_assert_held(&dev_priv->drm.struct_mutex);
- /* Only wait if there is actually an old frame to release to
+ /*
+ * Only wait if there is actually an old frame to release to
* guarantee forward progress.
*/
if (!overlay->old_vma)
return 0;
- if (I915_READ(GEN2_ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT) {
- /* synchronous slowpath */
- struct i915_request *rq;
+ if (!(I915_READ(GEN2_ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT)) {
+ intel_overlay_release_old_vid_tail(overlay);
+ return 0;
+ }
- rq = alloc_request(overlay);
- if (IS_ERR(rq))
- return PTR_ERR(rq);
+ rq = alloc_request(overlay, intel_overlay_release_old_vid_tail);
+ if (IS_ERR(rq))
+ return PTR_ERR(rq);
- cs = intel_ring_begin(rq, 2);
- if (IS_ERR(cs)) {
- i915_request_add(rq);
- return PTR_ERR(cs);
- }
+ cs = intel_ring_begin(rq, 2);
+ if (IS_ERR(cs)) {
+ i915_request_add(rq);
+ return PTR_ERR(cs);
+ }
- *cs++ = MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP;
- *cs++ = MI_NOOP;
- intel_ring_advance(rq, cs);
+ *cs++ = MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP;
+ *cs++ = MI_NOOP;
+ intel_ring_advance(rq, cs);
- ret = intel_overlay_do_wait_request(overlay, rq,
- intel_overlay_release_old_vid_tail);
- if (ret)
- return ret;
- } else
- intel_overlay_release_old_vid_tail(&overlay->last_flip, NULL);
+ i915_request_add(rq);
- return 0;
+ return i915_active_wait(&overlay->last_flip);
}
void intel_overlay_reset(struct drm_i915_private *dev_priv)
@@ -1375,7 +1371,9 @@ void intel_overlay_setup(struct drm_i915_private *dev_priv)
overlay->contrast = 75;
overlay->saturation = 146;
- INIT_ACTIVE_REQUEST(&overlay->last_flip);
+ i915_active_init(dev_priv,
+ &overlay->last_flip,
+ NULL, intel_overlay_last_flip_retire);
ret = get_registers(overlay, OVERLAY_NEEDS_PHYSICAL(dev_priv));
if (ret)
@@ -1409,6 +1407,7 @@ void intel_overlay_cleanup(struct drm_i915_private *dev_priv)
WARN_ON(overlay->active);
i915_gem_object_put(overlay->reg_bo);
+ i915_active_fini(&overlay->last_flip);
kfree(overlay);
}
diff --git a/drivers/gpu/drm/i915/i915_active.h b/drivers/gpu/drm/i915/i915_active.h
index 566336c99ed7..f6d730cf2fe6 100644
--- a/drivers/gpu/drm/i915/i915_active.h
+++ b/drivers/gpu/drm/i915/i915_active.h
@@ -89,25 +89,6 @@ int __must_check
i915_active_request_set(struct i915_active_request *active,
struct i915_request *rq);
-/**
- * i915_active_request_set_retire_fn - updates the retirement callback
- * @active - the active tracker
- * @fn - the routine called when the request is retired
- * @mutex - struct_mutex used to guard retirements
- *
- * i915_active_request_set_retire_fn() updates the function pointer that
- * is called when the final request associated with the @active tracker
- * is retired.
- */
-static inline void
-i915_active_request_set_retire_fn(struct i915_active_request *active,
- i915_active_retire_fn fn,
- struct mutex *mutex)
-{
- lockdep_assert_held(mutex);
- active->retire = fn ?: i915_active_retire_noop;
-}
-
/**
* i915_active_request_raw - return the active request
* @active - the active tracker
--
2.23.0.rc1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-12 13:41 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 13:38 [PATCH 01/18] drm/i915/guc: Use a local cancel_port_requests Chris Wilson
2019-08-12 13:38 ` [PATCH 02/18] drm/i915: Push the wakeref->count deferral to the backend Chris Wilson
2019-08-12 13:39 ` [PATCH 03/18] drm/i915/gt: Save/restore interrupts around breadcrumb disable Chris Wilson
2019-08-12 13:39 ` [PATCH 04/18] drm/i915/execlists: Lift process_csb() out of the irq-off spinlock Chris Wilson
2019-08-12 13:39 ` [PATCH 05/18] drm/i915/gt: Track timeline activeness in enter/exit Chris Wilson
2019-08-12 13:39 ` [PATCH 06/18] drm/i915/gt: Convert timeline tracking to spinlock Chris Wilson
2019-08-12 13:39 ` [PATCH 07/18] drm/i915/gt: Guard timeline pinning with its own mutex Chris Wilson
2019-08-12 13:39 ` [PATCH 08/18] drm/i915: Protect request retirement with timeline->mutex Chris Wilson
2019-08-12 13:39 ` [PATCH 09/18] drm/i915/gt: Mark context->active_count as protected by timeline->mutex Chris Wilson
2019-08-12 13:39 ` [PATCH 10/18] drm/i915: Forgo last_fence active request tracking Chris Wilson
2019-08-12 13:39 ` Chris Wilson [this message]
2019-08-12 15:38 ` [PATCH 11/18] drm/i915/overlay: Switch to using i915_active tracking Matthew Auld
2019-08-12 13:39 ` [PATCH 12/18] drm/i915: Extract intel_frontbuffer active tracking Chris Wilson
2019-08-12 13:39 ` [PATCH 13/18] drm/i915: Markup expected timeline locks for i915_active Chris Wilson
2019-08-12 13:39 ` [PATCH 14/18] drm/i915: Remove logical HW ID Chris Wilson
2019-08-12 13:39 ` [PATCH 15/18] drm/i915: Move context management under GEM Chris Wilson
2019-08-12 13:39 ` [PATCH 16/18] drm/i915/pmu: Use GT parked for estimating RC6 while asleep Chris Wilson
2019-08-12 13:39 ` [PATCH 17/18] drm/i915: Drop GEM context as a direct link from i915_request Chris Wilson
2019-08-12 13:39 ` [PATCH 18/18] drm/i915: Push the use-semaphore marker onto the intel_context Chris Wilson
2019-08-12 14:11 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [01/18] drm/i915/guc: Use a local cancel_port_requests Patchwork
2019-08-12 14:21 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-12 14:31 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-12 20:23 ` [PATCH 01/18] " Daniele Ceraolo Spurio
2019-08-12 20:36 ` [PATCH] " Chris Wilson
2019-08-19 10:06 ` [PATCH 01/18] " Janusz Krzysztofik
2019-08-12 20:59 ` ✗ Fi.CI.IGT: failure for series starting with [01/18] " Patchwork
2019-08-12 22:00 ` ✗ Fi.CI.BAT: failure for series starting with drm/i915/guc: Use a local cancel_port_requests (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812133915.18824-11-chris@chris-wilson.co.uk \
--to=chris@chris-wilson.co.uk \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.