All of lore.kernel.org
 help / color / mirror / Atom feed
From: Curtis Malainey <cujomalainey@chromium.org>
To: alsa-devel@alsa-project.org
Cc: Oder Chiou <oder_chiou@realtek.com>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Ben Zhang <benzh@chromium.org>, Mark Brown <broonie@kernel.org>,
	Bard Liao <bardliao@realtek.com>,
	Curtis Malainey <cujomalainey@chromium.org>
Subject: [alsa-devel] [RFC 02/15] ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
Date: Fri,  6 Sep 2019 12:46:24 -0700	[thread overview]
Message-ID: <20190906194636.217881-3-cujomalainey@chromium.org> (raw)
In-Reply-To: <20190906194636.217881-1-cujomalainey@chromium.org>

From: Ben Zhang <benzh@chromium.org>

Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.

This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
---
 sound/soc/codecs/rt5677.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 5b6ca3ced13b..315a3d39bc09 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -4493,11 +4493,11 @@ static int rt5677_set_bias_level(struct snd_soc_component *component,
 	case SND_SOC_BIAS_OFF:
 		regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC, 0x1, 0x0);
 		regmap_write(rt5677->regmap, RT5677_PWR_DIG1, 0x0000);
-		regmap_write(rt5677->regmap, RT5677_PWR_DIG2, 0x0000);
 		regmap_write(rt5677->regmap, RT5677_PWR_ANLG1,
 			2 << RT5677_LDO1_SEL_SFT |
 			2 << RT5677_LDO2_SEL_SFT);
-		regmap_write(rt5677->regmap, RT5677_PWR_ANLG2, 0x0000);
+		regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG2,
+			RT5677_PWR_CORE, 0);
 		regmap_update_bits(rt5677->regmap,
 			RT5677_PR_BASE + RT5677_BIAS_CUR4, 0x0f00, 0x0000);
 
-- 
2.23.0.187.g17f5b7556c-goog

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-09-06 19:50 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 19:46 [alsa-devel] [RFC 00/15] Add Samus Hotwording for RT5677 Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 01/15] ASoC: rt5677: Remove magic number register writes Curtis Malainey
2019-09-09 10:07   ` [alsa-devel] Applied "ASoC: rt5677: Remove magic number register writes" to the asoc tree Mark Brown
2019-09-06 19:46 ` Curtis Malainey [this message]
2019-09-09  9:54   ` [alsa-devel] [RFC 02/15] ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF Mark Brown
2019-09-09 15:50     ` Curtis Malainey
2019-09-09 12:23   ` [alsa-devel] Applied "ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF" to the asoc tree Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 03/15] ASoC: rt5677: Add a PCM device for streaming hotword via SPI Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 04/15] ASoC: rt5677: Load firmware " Curtis Malainey
2019-09-11 10:24   ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 05/15] ASoC: rt5677: Auto enable/disable DSP for hotwording Curtis Malainey
2019-09-11 10:25   ` Mark Brown
2019-09-11 20:22     ` Curtis Malainey
2019-09-12  9:26       ` Mark Brown
2019-09-16 21:29         ` Curtis Malainey
2019-09-16 21:55           ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 06/15] ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device Curtis Malainey
2019-09-09  0:18   ` Kuninori Morimoto
2019-09-09 16:53     ` Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 07/15] ASoC: rt5677: Enable jack detect while DSP is running Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 08/15] ASoC: rt5677: Use delayed work for DSP firmware load Curtis Malainey
2019-09-11 10:28   ` Mark Brown
2019-09-06 19:46 ` [alsa-devel] [RFC 09/15] ASoC: rt5677: Add DAPM audio path for hotword stream Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 10/15] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 11/15] ASoC: rt5677: Stop and restart DSP over suspend/resume Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 12/15] ASoC: rt5677: Transfer one period at a time over SPI Curtis Malainey
2019-09-11 10:54   ` Mark Brown
2019-09-11 18:09     ` Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 13/15] ASoC: rt5677: Disable irq at suspend Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 14/15] ASoC: rt5677: Allow VAD to be shut on/off at all times Curtis Malainey
2019-09-06 19:46 ` [alsa-devel] [RFC 15/15] ASoC: rt5677: Turn on MCLK1 for DSP via DAPM Curtis Malainey
2019-09-06 20:40 ` [alsa-devel] [RFC 00/15] Add Samus Hotwording for RT5677 Pierre-Louis Bossart
2019-09-06 21:09   ` Curtis Malainey
2019-09-06 22:13     ` Pierre-Louis Bossart
2019-09-09 16:52       ` Curtis Malainey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190906194636.217881-3-cujomalainey@chromium.org \
    --to=cujomalainey@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=benzh@chromium.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.