From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, <broonie@kernel.org>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct
Date: Fri, 13 Sep 2019 14:55:49 +0300 [thread overview]
Message-ID: <20190913115549.3823-5-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20190913115549.3823-1-alexandru.ardelean@analog.com>
The ADIS library is one of the few users of the new `cs_change_delay`
parameter for an spi_transfer.
The introduction of the `spi_delay` struct, requires that the users of of
`cs_change_delay` get an update. This change updates the ADIS library.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/imu/adis.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 1631c255deab..2cd2cc2316c6 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -39,24 +39,24 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 6,
.bits_per_word = 8,
@@ -139,16 +139,16 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.rx_buf = adis->rx,
@@ -156,8 +156,8 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.rx_buf = adis->rx + 2,
.bits_per_word = 8,
--
2.20.1
next prev parent reply other threads:[~2019-09-13 8:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-13 11:55 [PATCH v2 0/4] spi: introduce `struct spi_delay` data-type Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 1/4] spi: move `cs_change_delay` backwards compat logic outside switch Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 2/4] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec() Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 3/4] spi: make `cs_change_delay` the first user of the `spi_delay` logic Alexandru Ardelean
2019-09-13 11:55 ` Alexandru Ardelean [this message]
2019-09-15 10:14 ` [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct Jonathan Cameron
2019-09-16 6:58 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190913115549.3823-5-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=broonie@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.