From: "Noralf Trønnes" <noralf@tronnes.org>
To: devel@driverdev.osuosl.org
Cc: gregkh@linuxfoundation.org, "Noralf Trønnes" <noralf@tronnes.org>
Subject: [PATCH 3/3] staging/fbtft: Remove flexfb
Date: Tue, 17 Sep 2019 19:18:43 +0200 [thread overview]
Message-ID: <20190917171843.10334-3-noralf@tronnes.org> (raw)
In-Reply-To: <20190917171843.10334-1-noralf@tronnes.org>
flexfb was an attempt to write a generic fbtft driver that was abandoned.
All the displays it supports are supported by other fbtft drivers.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/staging/fbtft/Kconfig | 6 -
drivers/staging/fbtft/Makefile | 1 -
drivers/staging/fbtft/flexfb.c | 851 ---------------------------------
3 files changed, 858 deletions(-)
delete mode 100644 drivers/staging/fbtft/flexfb.c
diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 4c37d087e25c..cb61c2a772bd 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -199,9 +199,3 @@ config FB_TFT_WATTEROTT
depends on FB_TFT
help
Generic Framebuffer support for WATTEROTT
-
-config FB_FLEX
- tristate "Generic FB driver for TFT LCD displays"
- depends on FB_TFT
- help
- Generic Framebuffer support for TFT LCD displays.
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 925ec17e318d..27af43f32f81 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -36,4 +36,3 @@ obj-$(CONFIG_FB_TFT_UC1611) += fb_uc1611.o
obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o
obj-$(CONFIG_FB_TFT_UPD161704) += fb_upd161704.o
obj-$(CONFIG_FB_TFT_WATTEROTT) += fb_watterott.o
-obj-$(CONFIG_FB_FLEX) += flexfb.o
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
deleted file mode 100644
index 3747321011fa..000000000000
--- a/drivers/staging/fbtft/flexfb.c
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Generic FB driver for TFT LCD displays
- *
- * Copyright (C) 2013 Noralf Tronnes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include "fbtft.h"
-
-#define DRVNAME "flexfb"
-
-static char *chip;
-module_param(chip, charp, 0000);
-MODULE_PARM_DESC(chip, "LCD controller");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height");
-
-static s16 init[512];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence");
-
-static unsigned int setaddrwin;
-module_param(setaddrwin, uint, 0000);
-MODULE_PARM_DESC(setaddrwin, "Which set_addr_win() implementation to use");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Width of databus (default: 8)");
-
-static unsigned int regwidth = 8;
-module_param(regwidth, uint, 0000);
-MODULE_PARM_DESC(regwidth, "Width of controller register (default: 8)");
-
-static bool nobacklight;
-module_param(nobacklight, bool, 0000);
-MODULE_PARM_DESC(nobacklight, "Turn off backlight functionality.");
-
-static bool latched;
-module_param(latched, bool, 0000);
-MODULE_PARM_DESC(latched, "Use with latched 16-bit databus");
-
-static const s16 *initp;
-static int initp_num;
-
-/* default init sequences */
-static const s16 st7735r_init[] = {
- -1, 0x01,
- -2, 150,
- -1, 0x11,
- -2, 500,
- -1, 0xB1, 0x01, 0x2C, 0x2D,
- -1, 0xB2, 0x01, 0x2C, 0x2D,
- -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
- -1, 0xB4, 0x07,
- -1, 0xC0, 0xA2, 0x02, 0x84,
- -1, 0xC1, 0xC5,
- -1, 0xC2, 0x0A, 0x00,
- -1, 0xC3, 0x8A, 0x2A,
- -1, 0xC4, 0x8A, 0xEE,
- -1, 0xC5, 0x0E,
- -1, 0x20,
- -1, 0x36, 0xC0,
- -1, 0x3A, 0x05,
- -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22,
- 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
- -1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e,
- 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
- -1, 0x29,
- -2, 100,
- -1, 0x13,
- -2, 10,
- -3
-};
-
-static const s16 ssd1289_init[] = {
- -1, 0x00, 0x0001,
- -1, 0x03, 0xA8A4,
- -1, 0x0C, 0x0000,
- -1, 0x0D, 0x080C,
- -1, 0x0E, 0x2B00,
- -1, 0x1E, 0x00B7,
- -1, 0x01, 0x2B3F,
- -1, 0x02, 0x0600,
- -1, 0x10, 0x0000,
- -1, 0x11, 0x6070,
- -1, 0x05, 0x0000,
- -1, 0x06, 0x0000,
- -1, 0x16, 0xEF1C,
- -1, 0x17, 0x0003,
- -1, 0x07, 0x0233,
- -1, 0x0B, 0x0000,
- -1, 0x0F, 0x0000,
- -1, 0x41, 0x0000,
- -1, 0x42, 0x0000,
- -1, 0x48, 0x0000,
- -1, 0x49, 0x013F,
- -1, 0x4A, 0x0000,
- -1, 0x4B, 0x0000,
- -1, 0x44, 0xEF00,
- -1, 0x45, 0x0000,
- -1, 0x46, 0x013F,
- -1, 0x30, 0x0707,
- -1, 0x31, 0x0204,
- -1, 0x32, 0x0204,
- -1, 0x33, 0x0502,
- -1, 0x34, 0x0507,
- -1, 0x35, 0x0204,
- -1, 0x36, 0x0204,
- -1, 0x37, 0x0502,
- -1, 0x3A, 0x0302,
- -1, 0x3B, 0x0302,
- -1, 0x23, 0x0000,
- -1, 0x24, 0x0000,
- -1, 0x25, 0x8000,
- -1, 0x4f, 0x0000,
- -1, 0x4e, 0x0000,
- -1, 0x22,
- -3
-};
-
-static const s16 hx8340bn_init[] = {
- -1, 0xC1, 0xFF, 0x83, 0x40,
- -1, 0x11,
- -2, 150,
- -1, 0xCA, 0x70, 0x00, 0xD9,
- -1, 0xB0, 0x01, 0x11,
- -1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06,
- -2, 20,
- -1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A,
- -1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33,
- -2, 10,
- -1, 0xB5, 0x35, 0x20, 0x45,
- -1, 0xB4, 0x33, 0x25, 0x4C,
- -2, 10,
- -1, 0x3A, 0x05,
- -1, 0x29,
- -2, 10,
- -3
-};
-
-static const s16 ili9225_init[] = {
- -1, 0x0001, 0x011C,
- -1, 0x0002, 0x0100,
- -1, 0x0003, 0x1030,
- -1, 0x0008, 0x0808,
- -1, 0x000C, 0x0000,
- -1, 0x000F, 0x0A01,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -2, 50,
- -1, 0x0010, 0x0A00,
- -1, 0x0011, 0x1038,
- -2, 50,
- -1, 0x0012, 0x1121,
- -1, 0x0013, 0x004E,
- -1, 0x0014, 0x676F,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x00DB,
- -1, 0x0032, 0x0000,
- -1, 0x0033, 0x0000,
- -1, 0x0034, 0x00DB,
- -1, 0x0035, 0x0000,
- -1, 0x0036, 0x00AF,
- -1, 0x0037, 0x0000,
- -1, 0x0038, 0x00DB,
- -1, 0x0039, 0x0000,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x060A,
- -1, 0x0052, 0x0D0A,
- -1, 0x0053, 0x0303,
- -1, 0x0054, 0x0A0D,
- -1, 0x0055, 0x0A06,
- -1, 0x0056, 0x0000,
- -1, 0x0057, 0x0303,
- -1, 0x0058, 0x0000,
- -1, 0x0059, 0x0000,
- -2, 50,
- -1, 0x0007, 0x1017,
- -2, 50,
- -3
-};
-
-static const s16 ili9320_init[] = {
- -1, 0x00E5, 0x8000,
- -1, 0x0000, 0x0001,
- -1, 0x0001, 0x0100,
- -1, 0x0002, 0x0700,
- -1, 0x0003, 0x1030,
- -1, 0x0004, 0x0000,
- -1, 0x0008, 0x0202,
- -1, 0x0009, 0x0000,
- -1, 0x000A, 0x0000,
- -1, 0x000C, 0x0000,
- -1, 0x000D, 0x0000,
- -1, 0x000F, 0x0000,
- -1, 0x0010, 0x0000,
- -1, 0x0011, 0x0007,
- -1, 0x0012, 0x0000,
- -1, 0x0013, 0x0000,
- -2, 200,
- -1, 0x0010, 0x17B0,
- -1, 0x0011, 0x0031,
- -2, 50,
- -1, 0x0012, 0x0138,
- -2, 50,
- -1, 0x0013, 0x1800,
- -1, 0x0029, 0x0008,
- -2, 50,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x0505,
- -1, 0x0032, 0x0004,
- -1, 0x0035, 0x0006,
- -1, 0x0036, 0x0707,
- -1, 0x0037, 0x0105,
- -1, 0x0038, 0x0002,
- -1, 0x0039, 0x0707,
- -1, 0x003C, 0x0704,
- -1, 0x003D, 0x0807,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x00EF,
- -1, 0x0052, 0x0000,
- -1, 0x0053, 0x013F,
- -1, 0x0060, 0x2700,
- -1, 0x0061, 0x0001,
- -1, 0x006A, 0x0000,
- -1, 0x0080, 0x0000,
- -1, 0x0081, 0x0000,
- -1, 0x0082, 0x0000,
- -1, 0x0083, 0x0000,
- -1, 0x0084, 0x0000,
- -1, 0x0085, 0x0000,
- -1, 0x0090, 0x0010,
- -1, 0x0092, 0x0000,
- -1, 0x0093, 0x0003,
- -1, 0x0095, 0x0110,
- -1, 0x0097, 0x0000,
- -1, 0x0098, 0x0000,
- -1, 0x0007, 0x0173,
- -3
-};
-
-static const s16 ili9325_init[] = {
- -1, 0x00E3, 0x3008,
- -1, 0x00E7, 0x0012,
- -1, 0x00EF, 0x1231,
- -1, 0x0001, 0x0100,
- -1, 0x0002, 0x0700,
- -1, 0x0003, 0x1030,
- -1, 0x0004, 0x0000,
- -1, 0x0008, 0x0207,
- -1, 0x0009, 0x0000,
- -1, 0x000A, 0x0000,
- -1, 0x000C, 0x0000,
- -1, 0x000D, 0x0000,
- -1, 0x000F, 0x0000,
- -1, 0x0010, 0x0000,
- -1, 0x0011, 0x0007,
- -1, 0x0012, 0x0000,
- -1, 0x0013, 0x0000,
- -2, 200,
- -1, 0x0010, 0x1690,
- -1, 0x0011, 0x0223,
- -2, 50,
- -1, 0x0012, 0x000D,
- -2, 50,
- -1, 0x0013, 0x1200,
- -1, 0x0029, 0x000A,
- -1, 0x002B, 0x000C,
- -2, 50,
- -1, 0x0020, 0x0000,
- -1, 0x0021, 0x0000,
- -1, 0x0030, 0x0000,
- -1, 0x0031, 0x0506,
- -1, 0x0032, 0x0104,
- -1, 0x0035, 0x0207,
- -1, 0x0036, 0x000F,
- -1, 0x0037, 0x0306,
- -1, 0x0038, 0x0102,
- -1, 0x0039, 0x0707,
- -1, 0x003C, 0x0702,
- -1, 0x003D, 0x1604,
- -1, 0x0050, 0x0000,
- -1, 0x0051, 0x00EF,
- -1, 0x0052, 0x0000,
- -1, 0x0053, 0x013F,
- -1, 0x0060, 0xA700,
- -1, 0x0061, 0x0001,
- -1, 0x006A, 0x0000,
- -1, 0x0080, 0x0000,
- -1, 0x0081, 0x0000,
- -1, 0x0082, 0x0000,
- -1, 0x0083, 0x0000,
- -1, 0x0084, 0x0000,
- -1, 0x0085, 0x0000,
- -1, 0x0090, 0x0010,
- -1, 0x0092, 0x0600,
- -1, 0x0007, 0x0133,
- -3
-};
-
-static const s16 ili9341_init[] = {
- -1, 0x28,
- -2, 20,
- -1, 0xCF, 0x00, 0x83, 0x30,
- -1, 0xED, 0x64, 0x03, 0x12, 0x81,
- -1, 0xE8, 0x85, 0x01, 0x79,
- -1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02,
- -1, 0xF7, 0x20,
- -1, 0xEA, 0x00, 0x00,
- -1, 0xC0, 0x26,
- -1, 0xC1, 0x11,
- -1, 0xC5, 0x35, 0x3E,
- -1, 0xC7, 0xBE,
- -1, 0xB1, 0x00, 0x1B,
- -1, 0xB6, 0x0a, 0x82, 0x27, 0x00,
- -1, 0xB7, 0x07,
- -1, 0x3A, 0x55,
- -1, 0x36, 0x48,
- -1, 0x11,
- -2, 120,
- -1, 0x29,
- -2, 20,
- -3
-};
-
-static const s16 ssd1351_init[] = {
- -1, 0xfd, 0x12,
- -1, 0xfd, 0xb1,
- -1, 0xae,
- -1, 0xb3, 0xf1,
- -1, 0xca, 0x7f,
- -1, 0xa0, 0x74,
- -1, 0x15, 0x00, 0x7f,
- -1, 0x75, 0x00, 0x7f,
- -1, 0xa1, 0x00,
- -1, 0xa2, 0x00,
- -1, 0xb5, 0x00,
- -1, 0xab, 0x01,
- -1, 0xb1, 0x32,
- -1, 0xb4, 0xa0, 0xb5, 0x55,
- -1, 0xbb, 0x17,
- -1, 0xbe, 0x05,
- -1, 0xc1, 0xc8, 0x80, 0xc8,
- -1, 0xc7, 0x0f,
- -1, 0xb6, 0x01,
- -1, 0xa6,
- -1, 0xaf,
- -3
-};
-
-/**
- * struct flexfb_lcd_controller - Describes the LCD controller properties
- * @name: Model name of the chip
- * @width: Width of display in pixels
- * @height: Height of display in pixels
- * @setaddrwin: Which set_addr_win() implementation to use
- * @regwidth: LCD Controller Register width in bits
- * @init_seq: LCD initialization sequence
- * @init_seq_sz: Size of LCD initialization sequence
- */
-struct flexfb_lcd_controller {
- const char *name;
- unsigned int width;
- unsigned int height;
- unsigned int setaddrwin;
- unsigned int regwidth;
- const s16 *init_seq;
- int init_seq_sz;
-};
-
-static const struct flexfb_lcd_controller flexfb_chip_table[] = {
- {
- .name = "st7735r",
- .width = 120,
- .height = 160,
- .init_seq = st7735r_init,
- .init_seq_sz = ARRAY_SIZE(st7735r_init),
- },
- {
- .name = "hx8340bn",
- .width = 176,
- .height = 220,
- .init_seq = hx8340bn_init,
- .init_seq_sz = ARRAY_SIZE(hx8340bn_init),
- },
- {
- .name = "ili9225",
- .width = 176,
- .height = 220,
- .regwidth = 16,
- .init_seq = ili9225_init,
- .init_seq_sz = ARRAY_SIZE(ili9225_init),
- },
- {
- .name = "ili9320",
- .width = 240,
- .height = 320,
- .setaddrwin = 1,
- .regwidth = 16,
- .init_seq = ili9320_init,
- .init_seq_sz = ARRAY_SIZE(ili9320_init),
- },
- {
- .name = "ili9325",
- .width = 240,
- .height = 320,
- .setaddrwin = 1,
- .regwidth = 16,
- .init_seq = ili9325_init,
- .init_seq_sz = ARRAY_SIZE(ili9325_init),
- },
- {
- .name = "ili9341",
- .width = 240,
- .height = 320,
- .init_seq = ili9341_init,
- .init_seq_sz = ARRAY_SIZE(ili9341_init),
- },
- {
- .name = "ssd1289",
- .width = 240,
- .height = 320,
- .setaddrwin = 2,
- .regwidth = 16,
- .init_seq = ssd1289_init,
- .init_seq_sz = ARRAY_SIZE(ssd1289_init),
- },
- {
- .name = "ssd1351",
- .width = 128,
- .height = 128,
- .setaddrwin = 3,
- .init_seq = ssd1351_init,
- .init_seq_sz = ARRAY_SIZE(ssd1351_init),
- },
-};
-
-/* ili9320, ili9325 */
-static void flexfb_set_addr_win_1(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- switch (par->info->var.rotate) {
- /* R20h = Horizontal GRAM Start Address */
- /* R21h = Vertical GRAM Start Address */
- case 0:
- write_reg(par, 0x0020, xs);
- write_reg(par, 0x0021, ys);
- break;
- case 180:
- write_reg(par, 0x0020, width - 1 - xs);
- write_reg(par, 0x0021, height - 1 - ys);
- break;
- case 270:
- write_reg(par, 0x0020, width - 1 - ys);
- write_reg(par, 0x0021, xs);
- break;
- case 90:
- write_reg(par, 0x0020, ys);
- write_reg(par, 0x0021, height - 1 - xs);
- break;
- }
- write_reg(par, 0x0022); /* Write Data to GRAM */
-}
-
-/* ssd1289 */
-static void flexfb_set_addr_win_2(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- switch (par->info->var.rotate) {
- /* R4Eh - Set GDDRAM X address counter */
- /* R4Fh - Set GDDRAM Y address counter */
- case 0:
- write_reg(par, 0x4e, xs);
- write_reg(par, 0x4f, ys);
- break;
- case 180:
- write_reg(par, 0x4e, par->info->var.xres - 1 - xs);
- write_reg(par, 0x4f, par->info->var.yres - 1 - ys);
- break;
- case 270:
- write_reg(par, 0x4e, par->info->var.yres - 1 - ys);
- write_reg(par, 0x4f, xs);
- break;
- case 90:
- write_reg(par, 0x4e, ys);
- write_reg(par, 0x4f, par->info->var.xres - 1 - xs);
- break;
- }
-
- /* R22h - RAM data write */
- write_reg(par, 0x22, 0);
-}
-
-/* ssd1351 */
-static void set_addr_win_3(struct fbtft_par *par,
- int xs, int ys, int xe, int ye)
-{
- write_reg(par, 0x15, xs, xe);
- write_reg(par, 0x75, ys, ye);
- write_reg(par, 0x5C);
-}
-
-static int flexfb_verify_gpios_dc(struct fbtft_par *par)
-{
- fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
- if (!par->gpio.dc) {
- dev_err(par->info->device,
- "Missing info about 'dc' gpio. Aborting.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int flexfb_verify_gpios_db(struct fbtft_par *par)
-{
- int i;
- int num_db = buswidth;
-
- fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
- if (!par->gpio.dc) {
- dev_err(par->info->device, "Missing info about 'dc' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (!par->gpio.wr) {
- dev_err(par->info->device, "Missing info about 'wr' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (latched && !par->gpio.latch) {
- dev_err(par->info->device, "Missing info about 'latch' gpio. Aborting.\n");
- return -EINVAL;
- }
- if (latched)
- num_db = buswidth / 2;
- for (i = 0; i < num_db; i++) {
- if (!par->gpio.db[i]) {
- dev_err(par->info->device,
- "Missing info about 'db%02d' gpio. Aborting.\n",
- i);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip)
-{
- if (!width)
- width = chip->width;
- if (!height)
- height = chip->height;
- setaddrwin = chip->setaddrwin;
- if (chip->regwidth)
- regwidth = chip->regwidth;
- if (!init_num) {
- initp = chip->init_seq;
- initp_num = chip->init_seq_sz;
- }
-}
-
-static struct fbtft_display flex_display = { };
-
-static int flexfb_chip_init(const struct device *dev)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++)
- if (!strcmp(chip, flexfb_chip_table[i].name)) {
- flexfb_chip_load_param(&flexfb_chip_table[i]);
- return 0;
- }
-
- dev_err(dev, "chip=%s is not supported\n", chip);
-
- return -EINVAL;
-}
-
-static int flexfb_probe_common(struct spi_device *sdev,
- struct platform_device *pdev)
-{
- struct device *dev;
- struct fb_info *info;
- struct fbtft_par *par;
- int ret;
-
- initp = init;
- initp_num = init_num;
-
- if (sdev)
- dev = &sdev->dev;
- else
- dev = &pdev->dev;
-
- fbtft_init_dbg(dev, "%s(%s)\n", __func__,
- sdev ? "'SPI device'" : "'Platform device'");
-
- if (chip) {
- ret = flexfb_chip_init(dev);
- if (ret)
- return ret;
- }
-
- if (width == 0 || height == 0) {
- dev_err(dev, "argument(s) missing: width and height has to be set.\n");
- return -EINVAL;
- }
- flex_display.width = width;
- flex_display.height = height;
- fbtft_init_dbg(dev, "Display resolution: %dx%d\n", width, height);
- fbtft_init_dbg(dev, "chip = %s\n", chip ? chip : "not set");
- fbtft_init_dbg(dev, "setaddrwin = %d\n", setaddrwin);
- fbtft_init_dbg(dev, "regwidth = %d\n", regwidth);
- fbtft_init_dbg(dev, "buswidth = %d\n", buswidth);
-
- info = fbtft_framebuffer_alloc(&flex_display, dev, dev->platform_data);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- if (sdev)
- par->spi = sdev;
- else
- par->pdev = pdev;
- if (!par->init_sequence)
- par->init_sequence = initp;
- par->fbtftops.init_display = fbtft_init_display;
-
- /* registerwrite functions */
- switch (regwidth) {
- case 8:
- par->fbtftops.write_register = fbtft_write_reg8_bus8;
- break;
- case 16:
- par->fbtftops.write_register = fbtft_write_reg16_bus8;
- break;
- default:
- dev_err(dev,
- "argument 'regwidth': %d is not supported.\n",
- regwidth);
- return -EINVAL;
- }
-
- /* bus functions */
- if (sdev) {
- par->fbtftops.write = fbtft_write_spi;
- switch (buswidth) {
- case 8:
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- if (!par->startbyte)
- par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
- break;
- case 9:
- if (regwidth == 16) {
- dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n",
- regwidth, buswidth);
- return -EINVAL;
- }
- par->fbtftops.write_register = fbtft_write_reg8_bus9;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- if (par->spi->master->bits_per_word_mask
- & SPI_BPW_MASK(9)) {
- par->spi->bits_per_word = 9;
- break;
- }
-
- dev_warn(dev,
- "9-bit SPI not available, emulating using 8-bit.\n");
- /* allocate buffer with room for dc bits */
- par->extra = devm_kzalloc(par->info->device,
- par->txbuf.len
- + (par->txbuf.len / 8) + 8,
- GFP_KERNEL);
- if (!par->extra) {
- ret = -ENOMEM;
- goto out_release;
- }
- par->fbtftops.write = fbtft_write_spi_emulate_9;
-
- break;
- default:
- dev_err(dev,
- "argument 'buswidth': %d is not supported with SPI.\n",
- buswidth);
- return -EINVAL;
- }
- } else {
- par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
- switch (buswidth) {
- case 8:
- par->fbtftops.write = fbtft_write_gpio8_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- break;
- case 16:
- par->fbtftops.write_register = fbtft_write_reg16_bus16;
- if (latched)
- par->fbtftops.write = fbtft_write_gpio16_wr_latched;
- else
- par->fbtftops.write = fbtft_write_gpio16_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
- break;
- default:
- dev_err(dev,
- "argument 'buswidth': %d is not supported with parallel.\n",
- buswidth);
- return -EINVAL;
- }
- }
-
- /* set_addr_win function */
- switch (setaddrwin) {
- case 0:
- /* use default */
- break;
- case 1:
- par->fbtftops.set_addr_win = flexfb_set_addr_win_1;
- break;
- case 2:
- par->fbtftops.set_addr_win = flexfb_set_addr_win_2;
- break;
- case 3:
- par->fbtftops.set_addr_win = set_addr_win_3;
- break;
- default:
- dev_err(dev, "argument 'setaddrwin': unknown value %d.\n",
- setaddrwin);
- return -EINVAL;
- }
-
- if (!nobacklight)
- par->fbtftops.register_backlight = fbtft_register_backlight;
-
- ret = fbtft_register_framebuffer(info);
- if (ret < 0)
- goto out_release;
-
- return 0;
-
-out_release:
- fbtft_framebuffer_release(info);
-
- return ret;
-}
-
-static int flexfb_remove_common(struct device *dev, struct fb_info *info)
-{
- struct fbtft_par *par;
-
- if (!info)
- return -EINVAL;
- par = info->par;
- if (par)
- fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, "%s()\n",
- __func__);
- fbtft_unregister_framebuffer(info);
- fbtft_framebuffer_release(info);
-
- return 0;
-}
-
-static int flexfb_probe_spi(struct spi_device *spi)
-{
- return flexfb_probe_common(spi, NULL);
-}
-
-static int flexfb_remove_spi(struct spi_device *spi)
-{
- struct fb_info *info = spi_get_drvdata(spi);
-
- return flexfb_remove_common(&spi->dev, info);
-}
-
-static int flexfb_probe_pdev(struct platform_device *pdev)
-{
- return flexfb_probe_common(NULL, pdev);
-}
-
-static int flexfb_remove_pdev(struct platform_device *pdev)
-{
- struct fb_info *info = platform_get_drvdata(pdev);
-
- return flexfb_remove_common(&pdev->dev, info);
-}
-
-static struct spi_driver flexfb_spi_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .probe = flexfb_probe_spi,
- .remove = flexfb_remove_spi,
-};
-
-static const struct platform_device_id flexfb_platform_ids[] = {
- { "flexpfb", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(platform, flexfb_platform_ids);
-
-static struct platform_driver flexfb_platform_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .id_table = flexfb_platform_ids,
- .probe = flexfb_probe_pdev,
- .remove = flexfb_remove_pdev,
-};
-
-static int __init flexfb_init(void)
-{
- int ret, ret2;
-
- ret = spi_register_driver(&flexfb_spi_driver);
- ret2 = platform_driver_register(&flexfb_platform_driver);
- if (ret < 0)
- return ret;
- return ret2;
-}
-
-static void __exit flexfb_exit(void)
-{
- spi_unregister_driver(&flexfb_spi_driver);
- platform_driver_unregister(&flexfb_platform_driver);
-}
-
-/* ------------------------------------------------------------------------- */
-
-module_init(flexfb_init);
-module_exit(flexfb_exit);
-
-MODULE_DESCRIPTION("Generic FB driver for TFT LCD displays");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
--
2.20.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
prev parent reply other threads:[~2019-09-17 17:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 17:18 [PATCH 1/3] staging/fbtft: Depend on OF Noralf Trønnes
2019-09-17 17:18 ` Noralf Trønnes
2019-09-17 17:18 ` [PATCH 2/3] staging/fbtft: Remove fbtft_device Noralf Trønnes
2019-09-17 17:18 ` Noralf Trønnes [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917171843.10334-3-noralf@tronnes.org \
--to=noralf@tronnes.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.