All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Biju Das <biju.das@bp.renesas.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Simon Horman <horms@verge.net.au>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Subject: Re: [PATCH 1/8] arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi
Date: Tue, 1 Oct 2019 21:11:34 +0300	[thread overview]
Message-ID: <20191001181134.GC4735@pendragon.ideasonboard.com> (raw)
In-Reply-To: <1569932124-32010-2-git-send-email-biju.das@bp.renesas.com>

Hi Biju,

Thank you for the patch.

On Tue, Oct 01, 2019 at 01:15:17PM +0100, Biju Das wrote:
> RZ/G2N board is pin compatible with RZ/G2M board. However on the SoC
> side RZ/G2N uses DU3 where as RZ/G2M uses DU2 for the DPAD. In order to
> reuse the common dtsi for both the boards, it is required to move du clock
> properties from common dtsi to board specific dts.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

It would be nice if DT had a syntax that allowed extending an existing
property. It would allow us to write

&du {
	clocks += <&versaclock5 1>,
		  <&x302_clk>,
		  <&versaclock5 2>;
	clock-names += "dclkin.0", "dclkin.1", "dclkin.2";
};

in hihope-common.dtsi and be done with it.

Rob, do you think that's something worth adding ?

In any case, until we have that, this patch looks good to me.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/hihope-common.dtsi        |  8 --------
>  arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts | 11 +++++++++++
>  2 files changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> index 3e376d2..355d0a2 100644
> --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> @@ -142,14 +142,6 @@
>  };
>  
>  &du {
> -	clocks = <&cpg CPG_MOD 724>,
> -		 <&cpg CPG_MOD 723>,
> -		 <&cpg CPG_MOD 722>,
> -		 <&versaclock5 1>,
> -		 <&x302_clk>,
> -		 <&versaclock5 2>;
> -	clock-names = "du.0", "du.1", "du.2",
> -		      "dclkin.0", "dclkin.1", "dclkin.2";
>  	status = "okay";
>  };
>  
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
> index 93ca973..96f2fb0 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
> @@ -24,3 +24,14 @@
>  		reg = <0x6 0x00000000 0x0 0x80000000>;
>  	};
>  };
> +
> +&du {
> +	clocks = <&cpg CPG_MOD 724>,
> +		 <&cpg CPG_MOD 723>,
> +		 <&cpg CPG_MOD 722>,
> +		 <&versaclock5 1>,
> +		 <&x302_clk>,
> +		 <&versaclock5 2>;
> +	clock-names = "du.0", "du.1", "du.2",
> +		      "dclkin.0", "dclkin.1", "dclkin.2";
> +};

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2019-10-01 18:11 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-01 12:15 [PATCH 0/8] Add Display support Biju Das
2019-10-01 12:15 ` [PATCH 1/8] arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi Biju Das
2019-10-01 18:11   ` Laurent Pinchart [this message]
2019-10-01 18:17     ` Geert Uytterhoeven
2019-10-01 12:15 ` [PATCH 2/8] arm64: dts: renesas: r8a774b1: Add DU device to DT Biju Das
2019-10-01 18:13   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 3/8] arm64: dts: renesas: r8a774b1: Add HDMI encoder instance Biju Das
2019-10-01 18:15   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 4/8] arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock properties Biju Das
2019-10-01 18:15   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 5/8] arm64: dts: renesas: r8a774b1: Add FDP1 device nodes Biju Das
2019-10-01 18:16   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 6/8] arm64: dts: renesas: r8a774b1: Add PWM " Biju Das
2019-10-01 18:17   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 7/8] arm64: dts: renesas: hihope-rzg2-ex: Enable backlight Biju Das
2019-10-01 18:18   ` Laurent Pinchart
2019-10-01 12:15 ` [PATCH 8/8] arm64: dts: renesas: hihope-rzg2-ex: Add LVDS panel support Biju Das
2019-10-01 18:25   ` Laurent Pinchart
2019-10-02  8:30     ` Biju Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191001181134.GC4735@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrizio.castro@bp.renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.