From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Peter Geis <pgwipeout@gmail.com>,
Nicolas Chauvet <kwizart@gmail.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 11/17] ARM: dts: tegra20: Add CPU Operating Performance Points
Date: Wed, 16 Oct 2019 00:16:12 +0300 [thread overview]
Message-ID: <20191015211618.20758-12-digetx@gmail.com> (raw)
In-Reply-To: <20191015211618.20758-1-digetx@gmail.com>
Operating Point are specified per HW version. The OPP voltages are kept
in a separate DTSI file because some boards may not define CPU regulator
in their device-tree if voltage scaling isn't necessary, like for example
in a case of tegra20-trimslice which is outlet-powered device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
.../boot/dts/tegra20-cpu-opp-microvolt.dtsi | 201 ++++++++++++
arch/arm/boot/dts/tegra20-cpu-opp.dtsi | 302 ++++++++++++++++++
2 files changed, 503 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
create mode 100644 arch/arm/boot/dts/tegra20-cpu-opp.dtsi
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
new file mode 100644
index 000000000000..e85ffdbef876
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ cpu0_opp_table: cpu_opp_table0 {
+ opp@216000000_750 {
+ opp-microvolt = <750000 750000 1125000>;
+ };
+
+ opp@216000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@312000000_750 {
+ opp-microvolt = <750000 750000 1125000>;
+ };
+
+ opp@312000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@456000000_750 {
+ opp-microvolt = <750000 750000 1125000>;
+ };
+
+ opp@456000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@456000000_800_2_2 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@456000000_800_3_2 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@456000000_825 {
+ opp-microvolt = <825000 825000 1125000>;
+ };
+
+ opp@608000000_750 {
+ opp-microvolt = <750000 750000 1125000>;
+ };
+
+ opp@608000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@608000000_800_3_2 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@608000000_825 {
+ opp-microvolt = <825000 825000 1125000>;
+ };
+
+ opp@608000000_850 {
+ opp-microvolt = <850000 850000 1125000>;
+ };
+
+ opp@608000000_900 {
+ opp-microvolt = <900000 900000 1125000>;
+ };
+
+ opp@760000000_775 {
+ opp-microvolt = <775000 775000 1125000>;
+ };
+
+ opp@760000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@760000000_850 {
+ opp-microvolt = <850000 850000 1125000>;
+ };
+
+ opp@760000000_875 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@760000000_875_1_1 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@760000000_875_0_2 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@760000000_875_1_2 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@760000000_900 {
+ opp-microvolt = <900000 900000 1125000>;
+ };
+
+ opp@760000000_975 {
+ opp-microvolt = <975000 975000 1125000>;
+ };
+
+ opp@816000000_800 {
+ opp-microvolt = <800000 800000 1125000>;
+ };
+
+ opp@816000000_850 {
+ opp-microvolt = <850000 850000 1125000>;
+ };
+
+ opp@816000000_875 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@816000000_950 {
+ opp-microvolt = <950000 950000 1125000>;
+ };
+
+ opp@816000000_1000 {
+ opp-microvolt = <1000000 1000000 1125000>;
+ };
+
+ opp@912000000_850 {
+ opp-microvolt = <850000 850000 1125000>;
+ };
+
+ opp@912000000_900 {
+ opp-microvolt = <900000 900000 1125000>;
+ };
+
+ opp@912000000_925 {
+ opp-microvolt = <925000 925000 1125000>;
+ };
+
+ opp@912000000_950 {
+ opp-microvolt = <950000 950000 1125000>;
+ };
+
+ opp@912000000_950_0_2 {
+ opp-microvolt = <950000 950000 1125000>;
+ };
+
+ opp@912000000_950_2_2 {
+ opp-microvolt = <950000 950000 1125000>;
+ };
+
+ opp@912000000_1000 {
+ opp-microvolt = <1000000 1000000 1125000>;
+ };
+
+ opp@912000000_1050 {
+ opp-microvolt = <1050000 1050000 1125000>;
+ };
+
+ opp@1000000000_875 {
+ opp-microvolt = <875000 875000 1125000>;
+ };
+
+ opp@1000000000_900 {
+ opp-microvolt = <900000 900000 1125000>;
+ };
+
+ opp@1000000000_950 {
+ opp-microvolt = <950000 950000 1125000>;
+ };
+
+ opp@1000000000_975 {
+ opp-microvolt = <975000 975000 1125000>;
+ };
+
+ opp@1000000000_1000 {
+ opp-microvolt = <1000000 1000000 1125000>;
+ };
+
+ opp@1000000000_1000_0_2 {
+ opp-microvolt = <1000000 1000000 1125000>;
+ };
+
+ opp@1000000000_1025 {
+ opp-microvolt = <1025000 1025000 1125000>;
+ };
+
+ opp@1000000000_1100 {
+ opp-microvolt = <1100000 1100000 1125000>;
+ };
+
+ opp@1200000000_1000 {
+ opp-microvolt = <1000000 1000000 1125000>;
+ };
+
+ opp@1200000000_1050 {
+ opp-microvolt = <1050000 1050000 1125000>;
+ };
+
+ opp@1200000000_1100 {
+ opp-microvolt = <1100000 1100000 1125000>;
+ };
+
+ opp@1200000000_1125 {
+ opp-microvolt = <1125000 1125000 1125000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
new file mode 100644
index 000000000000..c878f4231791
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ cpu0_opp_table: cpu_opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@216000000_750 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x0F 0x0003>;
+ opp-hz = /bits/ 64 <216000000>;
+ };
+
+ opp@216000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x0F 0x0004>;
+ opp-hz = /bits/ 64 <216000000>;
+ };
+
+ opp@312000000_750 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x0F 0x0003>;
+ opp-hz = /bits/ 64 <312000000>;
+ };
+
+ opp@312000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x0F 0x0004>;
+ opp-hz = /bits/ 64 <312000000>;
+ };
+
+ opp@456000000_750 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x0C 0x0003>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ opp@456000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0006>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ opp@456000000_800_2_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0004>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ opp@456000000_800_3_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0004>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ opp@456000000_825 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <456000000>;
+ };
+
+ opp@608000000_750 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0003>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@608000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0006>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@608000000_800_3_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0004>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@608000000_825 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0001>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@608000000_850 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0006>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@608000000_900 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <608000000>;
+ };
+
+ opp@760000000_775 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0003>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0004>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_850 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0006>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_875 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0001>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_875_1_1 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x02 0x0002>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_875_0_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0004>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_875_1_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x02 0x0004>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_900 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0002>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@760000000_975 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <760000000>;
+ };
+
+ opp@816000000_800 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0007>;
+ opp-hz = /bits/ 64 <816000000>;
+ };
+
+ opp@816000000_850 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0002>;
+ opp-hz = /bits/ 64 <816000000>;
+ };
+
+ opp@816000000_875 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0005>;
+ opp-hz = /bits/ 64 <816000000>;
+ };
+
+ opp@816000000_950 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0006>;
+ opp-hz = /bits/ 64 <816000000>;
+ };
+
+ opp@816000000_1000 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <816000000>;
+ };
+
+ opp@912000000_850 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0007>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_900 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0002>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_925 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0001>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_950 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x02 0x0006>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_950_0_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0004>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_950_2_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0004>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_1000 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0002>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@912000000_1050 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <912000000>;
+ };
+
+ opp@1000000000_875 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0007>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_900 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0002>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_950 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0004>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_975 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0001>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_1000 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x02 0x0006>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_1000_0_2 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0004>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_1025 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0002>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1000000000_1100 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x03 0x0001>;
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+
+ opp@1200000000_1000 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x08 0x0004>;
+ opp-hz = /bits/ 64 <1200000000>;
+ };
+
+ opp@1200000000_1050 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x04 0x0004>;
+ opp-hz = /bits/ 64 <1200000000>;
+ };
+
+ opp@1200000000_1100 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x02 0x0004>;
+ opp-hz = /bits/ 64 <1200000000>;
+ };
+
+ opp@1200000000_1125 {
+ clock-latency-ns = <400000>;
+ opp-supported-hw = <0x01 0x0004>;
+ opp-hz = /bits/ 64 <1200000000>;
+ };
+ };
+};
--
2.23.0
next prev parent reply other threads:[~2019-10-15 21:16 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 21:16 [PATCH v1 00/17] NVIDIA Tegra20 CPUFreq driver major update Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 01/17] clk: tegra: Add custom CCLK implementation Dmitry Osipenko
2019-10-28 14:57 ` Peter De Schrijver
2019-10-28 14:57 ` Peter De Schrijver
2019-10-28 23:48 ` Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 02/17] clk: tegra: pll: Add pre/post rate-change hooks Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 03/17] clk: tegra: cclk: Add helpers for handling PLLX rate changes Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 04/17] clk: tegra20: Support custom CCLK implementation Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 05/17] clk: tegra30: " Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 06/17] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30 Dmitry Osipenko
2019-10-16 5:13 ` Viresh Kumar
2019-10-17 2:32 ` Viresh Kumar
2019-10-15 21:16 ` [PATCH v1 07/17] cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now) Dmitry Osipenko
2019-10-16 5:18 ` Viresh Kumar
2019-10-16 13:29 ` Dmitry Osipenko
2019-10-16 14:58 ` Peter Geis
2019-10-16 18:19 ` Dmitry Osipenko
2019-10-17 2:32 ` Viresh Kumar
2019-10-17 21:09 ` Dmitry Osipenko
2019-10-17 2:33 ` Viresh Kumar
2019-10-15 21:16 ` [PATCH v1 08/17] ARM: tegra: Remove tegra20-cpufreq platform device creation Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 09/17] ARM: dts: tegra20: Add CPU clock Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 10/17] ARM: dts: tegra30: " Dmitry Osipenko
2019-10-15 21:16 ` Dmitry Osipenko [this message]
2019-10-16 5:23 ` [PATCH v1 11/17] ARM: dts: tegra20: Add CPU Operating Performance Points Viresh Kumar
2019-10-16 13:21 ` Dmitry Osipenko
2019-10-17 2:28 ` Viresh Kumar
2019-10-17 2:32 ` Viresh Kumar
2019-10-15 21:16 ` [PATCH v1 12/17] ARM: dts: tegra30: " Dmitry Osipenko
2019-10-17 2:33 ` Viresh Kumar
2019-10-15 21:16 ` [PATCH v1 13/17] ARM: dts: tegra20: paz00: Set up voltage regulators for DVFS Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 14/17] ARM: dts: tegra20: paz00: Add CPU Operating Performance Points Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 15/17] ARM: dts: tegra20: trimslice: " Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 16/17] ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS Dmitry Osipenko
2019-10-15 21:16 ` [PATCH v1 17/17] ARM: dts: tegra30: beaver: Add CPU Operating Performance Points Dmitry Osipenko
2019-10-16 5:27 ` [PATCH v1 00/17] NVIDIA Tegra20 CPUFreq driver major update Viresh Kumar
2019-10-16 13:16 ` Dmitry Osipenko
2019-10-16 14:01 ` Thierry Reding
2019-10-16 14:20 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191015211618.20758-12-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=pgwipeout@gmail.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.