All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: linux-crypto@vger.kernel.org
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	David Miller <davem@davemloft.net>,
	"Jason A . Donenfeld" <Jason@zx2c4.com>,
	Samuel Neves <sneves@dei.uc.pt>, Arnd Bergmann <arnd@arndb.de>,
	Eric Biggers <ebiggers@google.com>,
	Andy Lutomirski <luto@kernel.org>,
	Martin Willi <martin@strongswan.org>,
	Rene van Dorst <opensource@vdorst.com>,
	David Sterba <dsterba@suse.com>
Subject: [PATCH v4 03/35] crypto: x86/chacha - depend on generic chacha library instead of crypto driver
Date: Thu, 17 Oct 2019 21:09:00 +0200	[thread overview]
Message-ID: <20191017190932.1947-4-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20191017190932.1947-1-ard.biesheuvel@linaro.org>

In preparation of extending the x86 ChaCha driver to also expose the ChaCha
library interface, drop the dependency on the chacha_generic crypto driver
as a non-SIMD fallback, and depend on the generic ChaCha library directly.
This way, we only pull in the code we actually need, without registering
a set of ChaCha skciphers that we will never use.

Since turning the FPU on and off is cheap these days, simplify the SIMD
routine by dropping the per-page yield, which makes for a cleaner switch
to the library API as well. This also allows use to invoke the skcipher
walk routines in non-atomic mode.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 arch/x86/crypto/chacha_glue.c | 98 +++++++++-----------
 crypto/Kconfig                |  2 +-
 2 files changed, 46 insertions(+), 54 deletions(-)

diff --git a/arch/x86/crypto/chacha_glue.c b/arch/x86/crypto/chacha_glue.c
index bc62daa8dafd..a264dcc64679 100644
--- a/arch/x86/crypto/chacha_glue.c
+++ b/arch/x86/crypto/chacha_glue.c
@@ -123,37 +123,38 @@ static void chacha_dosimd(u32 *state, u8 *dst, const u8 *src,
 	}
 }
 
-static int chacha_simd_stream_xor(struct skcipher_walk *walk,
+static int chacha_simd_stream_xor(struct skcipher_request *req,
 				  const struct chacha_ctx *ctx, const u8 *iv)
 {
 	u32 *state, state_buf[16 + 2] __aligned(8);
-	int next_yield = 4096; /* bytes until next FPU yield */
-	int err = 0;
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
 
 	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
 	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
 
-	crypto_chacha_init(state, ctx, iv);
+	chacha_init_generic(state, ctx->key, iv);
 
-	while (walk->nbytes > 0) {
-		unsigned int nbytes = walk->nbytes;
+	while (walk.nbytes > 0) {
+		unsigned int nbytes = walk.nbytes;
 
-		if (nbytes < walk->total) {
-			nbytes = round_down(nbytes, walk->stride);
-			next_yield -= nbytes;
-		}
+		if (nbytes < walk.total)
+			nbytes = round_down(nbytes, walk.stride);
 
-		chacha_dosimd(state, walk->dst.virt.addr, walk->src.virt.addr,
-			      nbytes, ctx->nrounds);
-
-		if (next_yield <= 0) {
-			/* temporarily allow preemption */
-			kernel_fpu_end();
+		if (!crypto_simd_usable()) {
+			chacha_crypt_generic(state, walk.dst.virt.addr,
+					     walk.src.virt.addr, nbytes,
+					     ctx->nrounds);
+		} else {
 			kernel_fpu_begin();
-			next_yield = 4096;
+			chacha_dosimd(state, walk.dst.virt.addr,
+				      walk.src.virt.addr, nbytes,
+				      ctx->nrounds);
+			kernel_fpu_end();
 		}
-
-		err = skcipher_walk_done(walk, walk->nbytes - nbytes);
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
 	return err;
@@ -163,55 +164,46 @@ static int chacha_simd(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	int err;
-
-	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
-		return crypto_chacha_crypt(req);
 
-	err = skcipher_walk_virt(&walk, req, true);
-	if (err)
-		return err;
-
-	kernel_fpu_begin();
-	err = chacha_simd_stream_xor(&walk, ctx, req->iv);
-	kernel_fpu_end();
-	return err;
+	return chacha_simd_stream_xor(req, ctx, req->iv);
 }
 
 static int xchacha_simd(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	struct chacha_ctx subctx;
 	u32 *state, state_buf[16 + 2] __aligned(8);
+	struct chacha_ctx subctx;
 	u8 real_iv[16];
-	int err;
-
-	if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable())
-		return crypto_xchacha_crypt(req);
-
-	err = skcipher_walk_virt(&walk, req, true);
-	if (err)
-		return err;
 
 	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
 	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
-	crypto_chacha_init(state, ctx, req->iv);
-
-	kernel_fpu_begin();
-
-	hchacha_block_ssse3(state, subctx.key, ctx->nrounds);
+	chacha_init_generic(state, ctx->key, req->iv);
+
+	if (req->cryptlen > CHACHA_BLOCK_SIZE && crypto_simd_usable()) {
+		kernel_fpu_begin();
+		hchacha_block_ssse3(state, subctx.key, ctx->nrounds);
+		kernel_fpu_end();
+	} else {
+		hchacha_block_generic(state, subctx.key, ctx->nrounds);
+	}
 	subctx.nrounds = ctx->nrounds;
 
 	memcpy(&real_iv[0], req->iv + 24, 8);
 	memcpy(&real_iv[8], req->iv + 16, 8);
-	err = chacha_simd_stream_xor(&walk, &subctx, real_iv);
+	return chacha_simd_stream_xor(req, &subctx, real_iv);
+}
 
-	kernel_fpu_end();
+static int chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
+		    unsigned int keysize)
+{
+	return chacha_setkey(tfm, key, keysize, 20);
+}
 
-	return err;
+static int chacha12_setkey(struct crypto_skcipher *tfm, const u8 *key,
+		    unsigned int keysize)
+{
+	return chacha_setkey(tfm, key, keysize, 12);
 }
 
 static struct skcipher_alg algs[] = {
@@ -227,7 +219,7 @@ static struct skcipher_alg algs[] = {
 		.max_keysize		= CHACHA_KEY_SIZE,
 		.ivsize			= CHACHA_IV_SIZE,
 		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= crypto_chacha20_setkey,
+		.setkey			= chacha20_setkey,
 		.encrypt		= chacha_simd,
 		.decrypt		= chacha_simd,
 	}, {
@@ -242,7 +234,7 @@ static struct skcipher_alg algs[] = {
 		.max_keysize		= CHACHA_KEY_SIZE,
 		.ivsize			= XCHACHA_IV_SIZE,
 		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= crypto_chacha20_setkey,
+		.setkey			= chacha20_setkey,
 		.encrypt		= xchacha_simd,
 		.decrypt		= xchacha_simd,
 	}, {
@@ -257,7 +249,7 @@ static struct skcipher_alg algs[] = {
 		.max_keysize		= CHACHA_KEY_SIZE,
 		.ivsize			= XCHACHA_IV_SIZE,
 		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= crypto_chacha12_setkey,
+		.setkey			= chacha12_setkey,
 		.encrypt		= xchacha_simd,
 		.decrypt		= xchacha_simd,
 	},
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 153cdefcbd78..9da4b67ac8e2 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1417,7 +1417,7 @@ config CRYPTO_CHACHA20_X86_64
 	tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)"
 	depends on X86 && 64BIT
 	select CRYPTO_BLKCIPHER
-	select CRYPTO_CHACHA20
+	select CRYPTO_LIB_CHACHA_GENERIC
 	help
 	  SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
 	  XChaCha20, and XChaCha12 stream ciphers.
-- 
2.20.1


  parent reply	other threads:[~2019-10-17 19:09 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-17 19:08 [PATCH v4 00/35] crypto: crypto API library interfaces for WireGuard Ard Biesheuvel
2019-10-17 19:08 ` [PATCH v4 01/35] crypto: tidy up lib/crypto Kconfig and Makefile Ard Biesheuvel
2019-10-17 19:08 ` [PATCH v4 02/35] crypto: chacha - move existing library code into lib/crypto Ard Biesheuvel
2019-10-23  3:05   ` Eric Biggers
2019-11-04  9:06     ` Ard Biesheuvel
2019-10-23  3:12   ` Eric Biggers
2019-10-17 19:09 ` Ard Biesheuvel [this message]
2019-10-17 19:09 ` [PATCH v4 04/35] crypto: x86/chacha - expose SIMD ChaCha routine as library function Ard Biesheuvel
2019-10-23  3:10   ` Eric Biggers
2019-10-23  4:40   ` Eric Biggers
2019-10-17 19:09 ` [PATCH v4 05/35] crypto: arm64/chacha - depend on generic chacha library instead of crypto driver Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 06/35] crypto: arm64/chacha - expose arm64 ChaCha routine as library function Ard Biesheuvel
2019-10-23  3:16   ` Eric Biggers
2019-10-17 19:09 ` [PATCH v4 07/35] crypto: arm/chacha - import Eric Biggers's scalar accelerated ChaCha code Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 08/35] crypto: arm/chacha - remove dependency on generic ChaCha driver Ard Biesheuvel
2019-10-23  3:21   ` Eric Biggers
2019-10-17 19:09 ` [PATCH v4 09/35] crypto: arm/chacha - expose ARM ChaCha routine as library function Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 10/35] crypto: mips/chacha - import 32r2 ChaCha code from Zinc Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 11/35] crypto: mips/chacha - wire up accelerated 32r2 " Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 12/35] crypto: chacha - unexport chacha_generic routines Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 13/35] crypto: poly1305 - move core routines into a separate library Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 14/35] crypto: x86/poly1305 - unify Poly1305 state struct with generic code Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 15/35] crypto: poly1305 - expose init/update/final library interface Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 16/35] crypto: x86/poly1305 - depend on generic library not generic shash Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 17/35] crypto: x86/poly1305 - expose existing driver as poly1305 library Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 18/35] crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 19/35] crypto: arm/poly1305 " Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 20/35] crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 21/35] int128: move __uint128_t compiler test to Kconfig Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 22/35] crypto: BLAKE2s - generic C library implementation and selftest Ard Biesheuvel
2019-10-23  4:51   ` Eric Biggers
2019-11-06 16:41     ` Ard Biesheuvel
2019-11-08 11:28       ` Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 23/35] crypto: testmgr - add test cases for Blake2s Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 24/35] crypto: blake2s - implement generic shash driver Ard Biesheuvel
2019-10-23  3:25   ` Eric Biggers
2019-10-17 19:09 ` [PATCH v4 25/35] crypto: BLAKE2s - x86_64 SIMD implementation Ard Biesheuvel
2019-10-23  4:55   ` Eric Biggers
2019-10-23 14:08     ` Jason A. Donenfeld
2019-10-23 15:04       ` Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 26/35] crypto: Curve25519 - generic C library implementations Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 27/35] crypto: testmgr - implement testing for KPP failures Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 28/35] crypto: curve25519 - add kpp selftest Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 29/35] crypto: curve25519 - implement generic KPP driver Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 30/35] crypto: lib/curve25519 - work around Clang stack spilling issue Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 31/35] crypto: Curve25519 - x86_64 library and KPP implementations Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 32/35] crypto: arm - import Bernstein and Schwabe's Curve25519 ARM implementation Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 33/35] crypto: arm/Curve25519 - wire up NEON implementation Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 34/35] crypto: chacha20poly1305 - import construction and selftest from Zinc Ard Biesheuvel
2019-10-17 19:09 ` [PATCH v4 35/35] crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routine Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191017190932.1947-4-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=Jason@zx2c4.com \
    --cc=arnd@arndb.de \
    --cc=davem@davemloft.net \
    --cc=dsterba@suse.com \
    --cc=ebiggers@google.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=martin@strongswan.org \
    --cc=opensource@vdorst.com \
    --cc=sneves@dei.uc.pt \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.