All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	nico@fluxnic.net
Subject: [PATCH v3 5/5] cpufreq: vexpress-spc: fix some coding style issues
Date: Fri, 18 Oct 2019 11:37:49 +0100	[thread overview]
Message-ID: <20191018103749.11226-6-sudeep.holla@arm.com> (raw)
In-Reply-To: <20191018103749.11226-1-sudeep.holla@arm.com>

Fix the following checkpatch checks/warnings:

CHECK: Unnecessary parentheses around the code
CHECK: Alignment should match open parenthesis
CHECK: Prefer kernel type 'u32' over 'uint32_t'
WARNING: Missing a blank line after declarations

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 36 +++++++++++++-------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 132610424747..3259498d7eaa 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -79,8 +79,8 @@ static unsigned int find_cluster_maxfreq(int cluster)
 	for_each_online_cpu(j) {
 		cpu_freq = per_cpu(cpu_last_req_freq, j);
 
-		if ((cluster == per_cpu(physical_cluster, j)) &&
-				(max_freq < cpu_freq))
+		if (cluster == per_cpu(physical_cluster, j) &&
+		    max_freq < cpu_freq)
 			max_freq = cpu_freq;
 	}
 
@@ -190,13 +190,11 @@ static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy,
 	freqs_new = freq_table[cur_cluster][index].frequency;
 
 	if (is_bL_switching_enabled()) {
-		if ((actual_cluster == A15_CLUSTER) &&
-				(freqs_new < clk_big_min)) {
+		if (actual_cluster == A15_CLUSTER && freqs_new < clk_big_min)
 			new_cluster = A7_CLUSTER;
-		} else if ((actual_cluster == A7_CLUSTER) &&
-				(freqs_new > clk_little_max)) {
+		else if (actual_cluster == A7_CLUSTER &&
+			 freqs_new > clk_little_max)
 			new_cluster = A15_CLUSTER;
-		}
 	}
 
 	ret = ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster,
@@ -224,7 +222,8 @@ static inline u32 get_table_count(struct cpufreq_frequency_table *table)
 static inline u32 get_table_min(struct cpufreq_frequency_table *table)
 {
 	struct cpufreq_frequency_table *pos;
-	uint32_t min_freq = ~0;
+	u32 min_freq = ~0;
+
 	cpufreq_for_each_entry(pos, table)
 		if (pos->frequency < min_freq)
 			min_freq = pos->frequency;
@@ -235,7 +234,8 @@ static inline u32 get_table_min(struct cpufreq_frequency_table *table)
 static inline u32 get_table_max(struct cpufreq_frequency_table *table)
 {
 	struct cpufreq_frequency_table *pos;
-	uint32_t max_freq = 0;
+	u32 max_freq = 0;
+
 	cpufreq_for_each_entry(pos, table)
 		if (pos->frequency > max_freq)
 			max_freq = pos->frequency;
@@ -259,10 +259,9 @@ static int merge_cluster_tables(void)
 	/* Add in reverse order to get freqs in increasing order */
 	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
 		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
-				j++) {
-			table[k].frequency = VIRT_FREQ(i,
-					freq_table[i][j].frequency);
-			k++;
+		     j++, k++) {
+			table[k].frequency =
+				VIRT_FREQ(i, freq_table[i][j].frequency);
 		}
 	}
 
@@ -335,13 +334,13 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
 		return 0;
 
 	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
-			__func__, cpu_dev->id, cluster);
+		__func__, cpu_dev->id, cluster);
 	ret = PTR_ERR(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
 
 out:
 	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
-			cluster);
+		cluster);
 	return ret;
 }
 
@@ -411,7 +410,7 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
 		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
+		       policy->cpu);
 		return -ENODEV;
 	}
 
@@ -437,7 +436,8 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_register_em(policy->cpus);
 
 	if (is_bL_switching_enabled())
-		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
+		per_cpu(cpu_last_req_freq, policy->cpu) =
+						clk_get_cpu_rate(policy->cpu);
 
 	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
 	return 0;
@@ -456,7 +456,7 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
 		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
+		       policy->cpu);
 		return -ENODEV;
 	}
 
-- 
2.17.1


  parent reply	other threads:[~2019-10-18 10:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 10:37 [PATCH v3 0/5] cpufreq: merge arm big.LITTLE and vexpress-spc drivers Sudeep Holla
2019-10-18 10:37 ` [PATCH v3 1/5] cpufreq: scpi: remove stale/outdated comment about the driver Sudeep Holla
2019-10-18 10:37 ` [PATCH v3 2/5] cpufreq: merge arm_big_little and vexpress-spc Sudeep Holla
2019-10-21  2:40   ` Viresh Kumar
2019-10-21 10:20     ` [RESEND] " Sudeep Holla
2019-10-18 10:37 ` [PATCH v3 3/5] cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction Sudeep Holla
2019-10-18 10:37 ` [PATCH v3 4/5] cpufreq: vexpress-spc: remove lots of debug messages Sudeep Holla
2019-10-18 10:37 ` Sudeep Holla [this message]
2019-10-21 10:54 ` [PATCH v3 0/5] cpufreq: merge arm big.LITTLE and vexpress-spc drivers Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191018103749.11226-6-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nico@fluxnic.net \
    --cc=rjw@rjwysocki.net \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.