Re: [PATCH 22/26] tests/boot_linux_console: Boot Linux and run few commands on raspi3

From: Cleber Rosa <crosa@redhat.com>
To: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: "Fam Zheng" <fam@euphon.net>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	"KONRAD Frederic" <frederic.konrad@adacore.com>,
	qemu-devel@nongnu.org, "Fabien Chouteau" <chouteau@adacore.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Kamil Rytarowski" <kamil@netbsd.org>,
	"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
	"Aleksandar Rikalo" <aleksandar.rikalo@rt-rk.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Aurelien Jarno" <aurelien@aurel32.net>
Subject: Re: [PATCH 22/26] tests/boot_linux_console: Boot Linux and run few commands on raspi3
Date: Mon, 28 Oct 2019 16:47:25 -0400	[thread overview]
Message-ID: <20191028204725.GC18794@localhost.localdomain> (raw)
In-Reply-To: <20191028073441.6448-23-philmd@redhat.com>

On Mon, Oct 28, 2019 at 08:34:37AM +0100, Philippe Mathieu-Daudé wrote:
> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> 
> Add a test which boots Linux and run basic commands using the serial
> port console.
> 
> The kernel image is built by the Debian project:
> https://wiki.debian.org/RaspberryPi
> 
> The DeviceTree blob comes from the official Raspberry Pi project:
> https://www.raspberrypi.org/
> 
> The cpio image used comes from the linux-build-test project:
> https://github.com/groeck/linux-build-test
> 
> This test can be run using:
> 
>   $ avocado run --show=console,app run -t machine:raspi3 tests/acceptance
>   console: [    0.000000] Linux version 4.14.0-3-arm64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.12-2 (2018-01-06)
>   console: [    0.000000] Boot CPU: AArch64 Processor [410fd034]
>   console: [    0.000000] Machine model: Raspberry Pi 3 Model B
>   console: [    0.000000] earlycon: pl11 at MMIO 0x000000003f201000 (options '')
>   console: [    0.000000] bootconsole [pl11] enabled
>   [...]
>   console: Starting network: OK
>   console: Found console ttyAMA0
>   console: Boot successful.
>   console: / # cat /proc/cpuinfo
>   console: processor      : 0
>   console: BogoMIPS       : 125.00
>   console: r      : 0x41
>   console: CPU architecture: 8
>   console: CPU variant
>   console: : 0x0
>   console: CPU part       : 0xd03
>   console: CPU revision   : 4
>   console: / # uname -a
>   console: Linux buildroot 4.14.0-3-arm64 #1 SMP Debian 4.14.12-2 (2018-01-06) aarch64 GNU/Linux
>   console: reboot
>   console: / # reboot
>   console: / # Found console ttyAMA0
>   console: Stopping network: OK
>   console: Saving random seed... done.
>   console: Stopping logging: OK
>   console: umount: devtmpfs busy - remounted read-only
>   console: umount: can't unmount /: Invalid argument
>   console: The system is going down NOW!
>   console: Sent SIGTERM to all processes
>   console: Sent SIGKILL to all processes
>   console: Requesting system reboot
>   console: kvm: exiting hardware virtualization
>   console: reboot: Restarting system
>   PASS (11.08 s)
> 
> Reviewed-by: Cleber Rosa <crosa@redhat.com>
> Tested-by: Cleber Rosa <crosa@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> v2: Use archive.gzip_uncompress (Cleber)
> 
> some chars are scrambled on the console?
> Cleber ran this 100 times and doesn't have issue.
> ---

Now, I'm not getting good vibes from this test.  It spawns QEMU and
then gets stuck on every single execution.

VM launch command: 'aarch64-softmmu/qemu-system-aarch64 -chardev socket,id=mon,path=/var/tmp/tmpgpee0g1h/qemu-23397-monitor.sock -mon chardev=mon,mode=control -display none -vga none -machine raspi3 -chardev socket,id=console,path=/var/tmp/tmpgpee0g1h/qemu-23397-console.sock,server,nowait -serial chardev:console -kernel /var/tmp/avocado_7ks9sppd/avocado_job_wsp2727i/1-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi3_initrd_uart0/boot/vmlinuz-4.14.0-3-arm64 -dtb /home/cleber/avocado/data/cache/by_location/cd5c65e442f2375a87c174b91963be739bcdae77/bcm2710-rpi-3-b.dtb -initrd /var/tmp/avocado_7ks9sppd/avocado_job_wsp2727i/1-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi3_initrd_uart0rootfs.cpio -append printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot -no-reboot'
>>> {'execute': 'qmp_capabilities'}
<<< {'return': {}}

Given that I've tested this before, and I see some changes to raspi3
since then, I'll try to bisect the possible culprit.  If you have any
clues, they would be much appreciated.

- Cleber.