[RFT 0/4] GMSL Refresh (would be v6)

From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Jacopo Mondi" <jacopo@jmondi.org>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	linux-renesas-soc@vger.kernel.org
Subject: [RFT 0/4] GMSL Refresh (would be v6)
Date: Sat, 16 Nov 2019 17:50:30 +0100	[thread overview]
Message-ID: <20191116165034.39001-1-jacopo+renesas@jmondi.org> (raw)

Hello this is refersh of our GMSL work.

Current situation is the following:
- Kieran sent a full v4 with multiplexed stream support and has a v5 branch in
  his repository with v4 review comment fixes on top

	I rebased the multiplexed stream's series on latest media-master
	https://jmondi.org/cgit/linux/log/?h=v4l2-mux/media-master/v6

	On top of that I took Kieran's v5 and re-applied on top:
	https://jmondi.org/cgit/linux/log/?h=jmondi/gmsl/kieran/v6

- Niklas sent a v1 (which sould have been a v5) which removes multiplexed
  streams and only support one camera and was meant for inclusion but is still
  floating around in linux-media, mostly because some of the comments on
  Kieran's v4 still applied there, if I'm not mistaken.

	I took Niklas' single stream max9286 and replaced the original
	bindings with a json-schema version
	https://jmondi.org/cgit/linux/log/?h=jmondi/gmsl/niklas/v6

I bumped all versions to v6 to avoid further confusion.

Not having a working GMSL setup I would ask to Kieran or Niklas to test this
version so that we can try re-send the single stream max9286 version with new
yaml bindings for inclusion.

(I kept linux-media e devicetree out as I would like to test the patches before
expanding the receivers list)

Thanks
   j

Jacopo Mondi (2):
  arm64: dts: renesas: Add Maxim GMSL expansion board
  arm64: dts: renesas: r8a7796=salvator-x: Include GMSL

Laurent Pinchart (1):
  dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286

Niklas Söderlund (1):
  max9286: Add MAX9286 driver

 .../bindings/media/i2c/maxim,max9286.yaml     |  286 +++++
 MAINTAINERS                                   |   10 +
 .../boot/dts/renesas/r8a7795-salvator-x.dts   |    1 +
 .../boot/dts/renesas/salvator-x-max9286.dtsi  |  394 ++++++
 drivers/media/i2c/Kconfig                     |   11 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/max9286.c                   | 1081 +++++++++++++++++
 7 files changed, 1784 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
 create mode 100644 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
 create mode 100644 drivers/media/i2c/max9286.c

--
2.23.0