[PATCH v37 08/17] target/avr: Add instruction translation - MCU Control Instructions

From: Michael Rolnik <mrolnik@gmail.com>
To: qemu-devel@nongnu.org
Cc: thuth@redhat.com, Michael Rolnik <mrolnik@gmail.com>,
	me@xcancerberox.com.ar, richard.henderson@linaro.org,
	dovgaluk@ispras.ru, imammedo@redhat.com, philmd@redhat.com,
	aleksandar.m.mail@gmail.com
Subject: [PATCH v37 08/17] target/avr: Add instruction translation - MCU Control Instructions
Date: Wed, 27 Nov 2019 19:52:48 +0200	[thread overview]
Message-ID: <20191127175257.23480-9-mrolnik@gmail.com> (raw)
In-Reply-To: <20191127175257.23480-1-mrolnik@gmail.com>

This includes:
    - BREAK
    - NOP
    - SLEEP
    - WDR

Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
---
 target/avr/translate.c | 174 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)

diff --git a/target/avr/translate.c b/target/avr/translate.c
index dc6a1af2fc..54b384f00b 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -381,6 +381,115 @@ static bool trans_ADC(DisasContext *ctx, arg_ADC *a)
 }
 
 
+static void gen_jmp_ez(DisasContext *ctx)
+{
+    tcg_gen_deposit_tl(cpu_pc, cpu_r[30], cpu_r[31], 8, 8);
+    tcg_gen_or_tl(cpu_pc, cpu_pc, cpu_eind);
+    ctx->bstate = DISAS_LOOKUP;
+}
+
+
+static void gen_jmp_z(DisasContext *ctx)
+{
+    tcg_gen_deposit_tl(cpu_pc, cpu_r[30], cpu_r[31], 8, 8);
+    ctx->bstate = DISAS_LOOKUP;
+}
+
+
+/*
+ *  in the gen_set_addr & gen_get_addr functions
+ *  H assumed to be in 0x00ff0000 format
+ *  M assumed to be in 0x000000ff format
+ *  L assumed to be in 0x000000ff format
+ */
+static void gen_set_addr(TCGv addr, TCGv H, TCGv M, TCGv L)
+{
+
+    tcg_gen_andi_tl(L, addr, 0x000000ff);
+
+    tcg_gen_andi_tl(M, addr, 0x0000ff00);
+    tcg_gen_shri_tl(M, M, 8);
+
+    tcg_gen_andi_tl(H, addr, 0x00ff0000);
+}
+
+
+static void gen_set_xaddr(TCGv addr)
+{
+    gen_set_addr(addr, cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+
+static void gen_set_yaddr(TCGv addr)
+{
+    gen_set_addr(addr, cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+
+static void gen_set_zaddr(TCGv addr)
+{
+    gen_set_addr(addr, cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+
+static TCGv gen_get_addr(TCGv H, TCGv M, TCGv L)
+{
+    TCGv addr = tcg_temp_new_i32();
+
+    tcg_gen_deposit_tl(addr, M, H, 8, 8);
+    tcg_gen_deposit_tl(addr, L, addr, 8, 16);
+
+    return addr;
+}
+
+
+static TCGv gen_get_xaddr(void)
+{
+    return gen_get_addr(cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+
+static TCGv gen_get_yaddr(void)
+{
+    return gen_get_addr(cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+
+static TCGv gen_get_zaddr(void)
+{
+    return gen_get_addr(cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+
+/*
+ *  Load one byte indirect from data space to register and stores an clear
+ *  the bits in data space specified by the register. The instruction can only
+ *  be used towards internal SRAM.  The data location is pointed to by the Z (16
+ *  bits) Pointer Register in the Register File. Memory access is limited to the
+ *  current data segment of 64KB. To access another data segment in devices with
+ *  more than 64KB data space, the RAMPZ in register in the I/O area has to be
+ *  changed.  The Z-pointer Register is left unchanged by the operation. This
+ *  instruction is especially suited for clearing status bits stored in SRAM.
+ */
+static void gen_data_store(DisasContext *ctx, TCGv data, TCGv addr)
+{
+    if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+        gen_helper_fullwr(cpu_env, data, addr);
+    } else {
+        tcg_gen_qemu_st8(data, addr, MMU_DATA_IDX); /* mem[addr] = data */
+    }
+}
+
+static void gen_data_load(DisasContext *ctx, TCGv data, TCGv addr)
+{
+    if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+        gen_helper_fullrd(data, cpu_env, addr);
+    } else {
+        tcg_gen_qemu_ld8u(data, addr, MMU_DATA_IDX); /* data = mem[addr] */
+    }
+}
+
+
 /*
  *  Subtracts an immediate value (0-63) from a register pair and places the
  *  result in the register pair. This instruction operates on the upper four
@@ -2631,3 +2740,68 @@ static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a)
 
     return true;
 }
+
+
+/*
+ *  The BREAK instruction is used by the On-chip Debug system, and is
+ *  normally not used in the application software. When the BREAK instruction is
+ *  executed, the AVR CPU is set in the Stopped Mode. This gives the On-chip
+ *  Debugger access to internal resources.  If any Lock bits are set, or either
+ *  the JTAGEN or OCDEN Fuses are unprogrammed, the CPU will treat the BREAK
+ *  instruction as a NOP and will not enter the Stopped mode.  This instruction
+ *  is not available in all devices. Refer to the device specific instruction
+ *  set summary.
+ */
+static bool trans_BREAK(DisasContext *ctx, arg_BREAK *a)
+{
+    if (!avr_have_feature(ctx, AVR_FEATURE_BREAK)) {
+        return true;
+    }
+
+#ifdef BREAKPOINT_ON_BREAK
+    tcg_gen_movi_tl(cpu_pc, ctx->npc - 1);
+    gen_helper_debug(cpu_env);
+    ctx->bstate = DISAS_EXIT;
+#else
+    /* NOP */
+#endif
+
+    return true;
+}
+
+
+/*
+ *  This instruction performs a single cycle No Operation.
+ */
+static bool trans_NOP(DisasContext *ctx, arg_NOP *a)
+{
+
+    /* NOP */
+
+    return true;
+}
+
+
+/*
+ *  This instruction sets the circuit in sleep mode defined by the MCU
+ *  Control Register.
+ */
+static bool trans_SLEEP(DisasContext *ctx, arg_SLEEP *a)
+{
+    gen_helper_sleep(cpu_env);
+    ctx->bstate = DISAS_NORETURN;
+    return true;
+}
+
+
+/*
+ *  This instruction resets the Watchdog Timer. This instruction must be
+ *  executed within a limited time given by the WD prescaler. See the Watchdog
+ *  Timer hardware specification.
+ */
+static bool trans_WDR(DisasContext *ctx, arg_WDR *a)
+{
+    gen_helper_wdr(cpu_env);
+
+    return true;
+}
-- 
2.17.2 (Apple Git-113)


