[PATCH v2 10/19] usb: dwc3: Add support for role-switch-default-mode binding

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	gregkh@linuxfoundation.org, jackp@codeaurora.org,
	balbi@kernel.org, bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org,
	John Stultz <john.stultz@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	ShuFan Lee <shufan_lee@richtek.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Yu Chen <chenyu56@huawei.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Jun Li <lijun.kernel@gmail.com>,
	Valentin Schneider <valentin.schneider@arm.com>,
	devicetree@vger.kernel.org,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v2 10/19] usb: dwc3: Add support for role-switch-default-mode binding
Date: Mon, 20 Jan 2020 16:31:07 +0000	[thread overview]
Message-ID: <20200120163116.1197682-11-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200120163116.1197682-1-bryan.odonoghue@linaro.org>

From: John Stultz <john.stultz@linaro.org>

Support the new role-switch-default-mode binding for configuring
the default role the controller assumes as when the usb role is
USB_ROLE_NONE

This patch was split out from a larger patch originally by
Yu Chen <chenyu56@huawei.com>

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/core.h |  3 +++
 drivers/usb/dwc3/drd.c  | 25 ++++++++++++++++++++++---
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a99e57636172..57d549a1ad0b 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -955,6 +955,8 @@ struct dwc3_scratchpad_array {
  *		- USBPHY_INTERFACE_MODE_UTMI
  *		- USBPHY_INTERFACE_MODE_UTMIW
  * @role_sw: usb_role_switch handle
+ * @role_switch_default_mode: default operation mode of controller while
+ *			usb role is USB_ROLE_NONE.
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
@@ -1089,6 +1091,7 @@ struct dwc3 {
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
 	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 3b57d2ddda93..865341facece 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -491,7 +491,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
 		mode = DWC3_GCTL_PRTCAP_DEVICE;
 		break;
 	default:
-		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
 		break;
 	}
 
@@ -517,7 +520,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
 		role = dwc->current_otg_role;
 		break;
 	default:
-		role = USB_ROLE_DEVICE;
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else
+			role = USB_ROLE_DEVICE;
 		break;
 	}
 	spin_unlock_irqrestore(&dwc->lock, flags);
@@ -527,6 +533,19 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
 static int dwc3_setup_role_switch(struct dwc3 *dwc)
 {
 	struct usb_role_switch_desc dwc3_role_switch = {NULL};
+	const char *str;
+	u32 mode;
+	int ret;
+
+	ret = device_property_read_string(dwc->dev, "role-switch-default-mode",
+					  &str);
+	if (ret >= 0  && !strncmp(str, "host", strlen("host"))) {
+		dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+		mode = DWC3_GCTL_PRTCAP_HOST;
+	} else {
+		dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+	}
 
 	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
 	dwc3_role_switch.set = dwc3_usb_role_switch_set;
@@ -535,7 +554,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
 	if (IS_ERR(dwc->role_sw))
 		return PTR_ERR(dwc->role_sw);
 
-	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+	dwc3_set_mode(dwc, mode);
 	return 0;
 }
 #else
-- 
2.25.0

