All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Boris Brezillon <bbrezillon@kernel.org>
Subject: [PATCH v5 15/52] drm/bridge: tfp410: Replace manual connector handling with bridge
Date: Fri, 24 Jan 2020 05:54:08 +0200	[thread overview]
Message-ID: <20200124035445.1830-16-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20200124035445.1830-1-laurent.pinchart@ideasonboard.com>

Now that a driver is available for display connectors, replace the
manual connector handling code with usage of the DRM bridge API. The
tfp410 driver doesn't deal with the display connector directly anymore,
but still delegates drm_connector operations to the next bridge. This
brings us one step closer to having the tfp410 driver handling the
TFP410 only.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
Changes since v2:

- Use drm_bridge_get_edid() and drm_bridge_detect() helpers
---
 drivers/gpu/drm/bridge/ti-tfp410.c | 216 ++++++++++-------------------
 1 file changed, 75 insertions(+), 141 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index ae6ff7d93656..983fa1588a73 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -4,14 +4,12 @@
  * Author: Jyri Sarha <jsarha@ti.com>
  */
 
-#include <linux/delay.h>
-#include <linux/fwnode.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
-#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
+#include <linux/workqueue.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
@@ -24,16 +22,13 @@
 struct tfp410 {
 	struct drm_bridge	bridge;
 	struct drm_connector	connector;
-	unsigned int		connector_type;
 
 	u32			bus_format;
-	struct i2c_adapter	*ddc;
-	struct gpio_desc	*hpd;
-	int			hpd_irq;
 	struct delayed_work	hpd_work;
 	struct gpio_desc	*powerdown;
 
 	struct drm_bridge_timings timings;
+	struct drm_bridge	*next_bridge;
 
 	struct device *dev;
 };
@@ -56,13 +51,18 @@ static int tfp410_get_modes(struct drm_connector *connector)
 	struct edid *edid;
 	int ret;
 
-	if (!dvi->ddc)
-		goto fallback;
+	edid = drm_bridge_get_edid(dvi->next_bridge, connector);
+	if (IS_ERR_OR_NULL(edid)) {
+		if (edid != ERR_PTR(-ENOTSUPP))
+			DRM_INFO("EDID read failed. Fallback to standard modes\n");
 
-	edid = drm_get_edid(connector, dvi->ddc);
-	if (!edid) {
-		DRM_INFO("EDID read failed. Fallback to standard modes\n");
-		goto fallback;
+		/*
+		 * No EDID, fallback on the XGA standard modes and prefer a mode
+		 * pretty much anything can handle.
+		 */
+		ret = drm_add_modes_noedid(connector, 1920, 1200);
+		drm_set_preferred_mode(connector, 1024, 768);
+		return ret;
 	}
 
 	drm_connector_update_edid_property(connector, edid);
@@ -71,15 +71,6 @@ static int tfp410_get_modes(struct drm_connector *connector)
 
 	kfree(edid);
 
-	return ret;
-
-fallback:
-	/* No EDID, fallback on the XGA standard modes */
-	ret = drm_add_modes_noedid(connector, 1920, 1200);
-
-	/* And prefer a mode pretty much anything can handle */
-	drm_set_preferred_mode(connector, 1024, 768);
-
 	return ret;
 }
 
@@ -92,21 +83,7 @@ tfp410_connector_detect(struct drm_connector *connector, bool force)
 {
 	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
 
-	if (dvi->hpd) {
-		if (gpiod_get_value_cansleep(dvi->hpd))
-			return connector_status_connected;
-		else
-			return connector_status_disconnected;
-	}
-
-	if (dvi->ddc) {
-		if (drm_probe_ddc(dvi->ddc))
-			return connector_status_connected;
-		else
-			return connector_status_disconnected;
-	}
-
-	return connector_status_unknown;
+	return drm_bridge_detect(dvi->next_bridge);
 }
 
 static const struct drm_connector_funcs tfp410_con_funcs = {
@@ -118,12 +95,35 @@ static const struct drm_connector_funcs tfp410_con_funcs = {
 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
 };
 
+static void tfp410_hpd_work_func(struct work_struct *work)
+{
+	struct tfp410 *dvi;
+
+	dvi = container_of(work, struct tfp410, hpd_work.work);
+
+	if (dvi->bridge.dev)
+		drm_helper_hpd_irq_event(dvi->bridge.dev);
+}
+
+static void tfp410_hpd_callback(void *arg, enum drm_connector_status status)
+{
+	struct tfp410 *dvi = arg;
+
+	mod_delayed_work(system_wq, &dvi->hpd_work,
+			 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
+}
+
 static int tfp410_attach(struct drm_bridge *bridge,
 			 enum drm_bridge_attach_flags flags)
 {
 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
 	int ret;
 
+	ret = drm_bridge_attach(bridge->encoder, dvi->next_bridge, bridge,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret < 0)
+		return ret;
+
 	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
 		DRM_ERROR("Fix bridge driver to make connector optional!");
 		return -EINVAL;
@@ -134,17 +134,23 @@ static int tfp410_attach(struct drm_bridge *bridge,
 		return -ENODEV;
 	}
 
-	if (dvi->hpd_irq >= 0)
+	if (dvi->next_bridge->ops & DRM_BRIDGE_OP_DETECT)
 		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 	else
 		dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 
+	if (dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
+		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
+		drm_bridge_hpd_enable(dvi->next_bridge, tfp410_hpd_callback,
+				      dvi);
+	}
+
 	drm_connector_helper_add(&dvi->connector,
 				 &tfp410_con_helper_funcs);
 	ret = drm_connector_init_with_ddc(bridge->dev, &dvi->connector,
 					  &tfp410_con_funcs,
-					  dvi->connector_type,
-					  dvi->ddc);
+					  dvi->next_bridge->type,
+					  dvi->next_bridge->ddc);
 	if (ret) {
 		dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
 		return ret;
@@ -153,12 +159,21 @@ static int tfp410_attach(struct drm_bridge *bridge,
 	drm_display_info_set_bus_formats(&dvi->connector.display_info,
 					 &dvi->bus_format, 1);
 
-	drm_connector_attach_encoder(&dvi->connector,
-					  bridge->encoder);
+	drm_connector_attach_encoder(&dvi->connector, bridge->encoder);
 
 	return 0;
 }
 
+static void tfp410_detach(struct drm_bridge *bridge)
+{
+	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
+
+	if (dvi->connector.dev && dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
+		drm_bridge_hpd_disable(dvi->next_bridge);
+		cancel_delayed_work_sync(&dvi->hpd_work);
+	}
+}
+
 static void tfp410_enable(struct drm_bridge *bridge)
 {
 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
@@ -175,30 +190,11 @@ static void tfp410_disable(struct drm_bridge *bridge)
 
 static const struct drm_bridge_funcs tfp410_bridge_funcs = {
 	.attach		= tfp410_attach,
+	.detach		= tfp410_detach,
 	.enable		= tfp410_enable,
 	.disable	= tfp410_disable,
 };
 
-static void tfp410_hpd_work_func(struct work_struct *work)
-{
-	struct tfp410 *dvi;
-
-	dvi = container_of(work, struct tfp410, hpd_work.work);
-
-	if (dvi->bridge.dev)
-		drm_helper_hpd_irq_event(dvi->bridge.dev);
-}
-
-static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg)
-{
-	struct tfp410 *dvi = arg;
-
-	mod_delayed_work(system_wq, &dvi->hpd_work,
-			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
-
-	return IRQ_HANDLED;
-}
-
 static const struct drm_bridge_timings tfp410_default_timings = {
 	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
 			 | DRM_BUS_FLAG_DE_HIGH,
@@ -276,51 +272,9 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
 	return 0;
 }
 
-static int tfp410_get_connector_properties(struct tfp410 *dvi)
-{
-	struct device_node *connector_node, *ddc_phandle;
-	int ret = 0;
-
-	/* port@1 is the connector node */
-	connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1);
-	if (!connector_node)
-		return -ENODEV;
-
-	if (of_device_is_compatible(connector_node, "hdmi-connector"))
-		dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
-	else
-		dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
-
-	dvi->hpd = fwnode_gpiod_get_index(&connector_node->fwnode,
-					  "hpd", 0, GPIOD_IN, "hpd");
-	if (IS_ERR(dvi->hpd)) {
-		ret = PTR_ERR(dvi->hpd);
-		dvi->hpd = NULL;
-		if (ret == -ENOENT)
-			ret = 0;
-		else
-			goto fail;
-	}
-
-	ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0);
-	if (!ddc_phandle)
-		goto fail;
-
-	dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle);
-	if (dvi->ddc)
-		dev_info(dvi->dev, "Connector's ddc i2c bus found\n");
-	else
-		ret = -EPROBE_DEFER;
-
-	of_node_put(ddc_phandle);
-
-fail:
-	of_node_put(connector_node);
-	return ret;
-}
-
 static int tfp410_init(struct device *dev, bool i2c)
 {
+	struct device_node *node;
 	struct tfp410 *dvi;
 	int ret;
 
@@ -332,21 +286,31 @@ static int tfp410_init(struct device *dev, bool i2c)
 	dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL);
 	if (!dvi)
 		return -ENOMEM;
+
+	dvi->dev = dev;
 	dev_set_drvdata(dev, dvi);
 
 	dvi->bridge.funcs = &tfp410_bridge_funcs;
 	dvi->bridge.of_node = dev->of_node;
 	dvi->bridge.timings = &dvi->timings;
-	dvi->dev = dev;
+	dvi->bridge.type = DRM_MODE_CONNECTOR_DVID;
 
 	ret = tfp410_parse_timings(dvi, i2c);
 	if (ret)
-		goto fail;
+		return ret;
 
-	ret = tfp410_get_connector_properties(dvi);
-	if (ret)
-		goto fail;
+	/* Get the next bridge, connected to port@1. */
+	node = of_graph_get_remote_node(dev->of_node, 1, -1);
+	if (!node)
+		return -ENODEV;
+
+	dvi->next_bridge = of_drm_find_bridge(node);
+	of_node_put(node);
 
+	if (!dvi->next_bridge)
+		return -EPROBE_DEFER;
+
+	/* Get the powerdown GPIO. */
 	dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
 						 GPIOD_OUT_HIGH);
 	if (IS_ERR(dvi->powerdown)) {
@@ -354,48 +318,18 @@ static int tfp410_init(struct device *dev, bool i2c)
 		return PTR_ERR(dvi->powerdown);
 	}
 
-	if (dvi->hpd)
-		dvi->hpd_irq = gpiod_to_irq(dvi->hpd);
-	else
-		dvi->hpd_irq = -ENXIO;
-
-	if (dvi->hpd_irq >= 0) {
-		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
-
-		ret = devm_request_threaded_irq(dev, dvi->hpd_irq,
-			NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING |
-			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"hdmi-hpd", dvi);
-		if (ret) {
-			DRM_ERROR("failed to register hpd interrupt\n");
-			goto fail;
-		}
-	}
-
+	/*  Register the DRM bridge. */
 	drm_bridge_add(&dvi->bridge);
 
 	return 0;
-fail:
-	i2c_put_adapter(dvi->ddc);
-	if (dvi->hpd)
-		gpiod_put(dvi->hpd);
-	return ret;
 }
 
 static int tfp410_fini(struct device *dev)
 {
 	struct tfp410 *dvi = dev_get_drvdata(dev);
 
-	if (dvi->hpd_irq >= 0)
-		cancel_delayed_work_sync(&dvi->hpd_work);
-
 	drm_bridge_remove(&dvi->bridge);
 
-	if (dvi->ddc)
-		i2c_put_adapter(dvi->ddc);
-	if (dvi->hpd)
-		gpiod_put(dvi->hpd);
-
 	return 0;
 }
 
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-01-24  3:56 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-24  3:53 [PATCH v5 00/52] drm/omap: Replace custom display drivers with drm_bridge and drm_panel Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 01/52] video: hdmi: Change return type of hdmi_avi_infoframe_init() to void Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 02/52] drm/connector: Add helper to get a connector type name Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 03/52] drm/edid: Add flag to drm_display_info to identify HDMI sinks Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 04/52] drm/bridge: Add connector-related bridge operations and data Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 05/52] drm/bridge: Add interlace_allowed flag to drm_bridge Laurent Pinchart
2020-01-24  3:53 ` [PATCH v5 06/52] drm/bridge: Extend bridge API to disable connector creation Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 07/52] drm/bridge: dumb-vga-dac: Rename internal symbols to simple-bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 08/52] drm/bridge: dumb-vga-dac: Rename driver " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 09/52] drm/bridge: simple-bridge: Add support for non-VGA bridges Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 10/52] drm/bridge: simple-bridge: Add support for enable GPIO Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 11/52] drm/bridge: simple-bridge: Add support for the TI OPA362 Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 12/52] drm/bridge: Add bridge driver for display connectors Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 13/52] drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 14/52] drm/bridge: panel: Implement bridge connector operations Laurent Pinchart
2020-01-24  3:54 ` Laurent Pinchart [this message]
2020-01-24  3:54 ` [PATCH v5 16/52] drm/bridge: tfp410: Allow operation without drm_connector Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 17/52] drm: Add helper to create a connector for a chain of bridges Laurent Pinchart
2020-01-28 11:19   ` Tomi Valkeinen
2020-02-16 15:39     ` Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 18/52] drm/omap: Fix possible object reference leak Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 19/52] drm/omap: dss: Cleanup DSS ports on initialisation failure Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 20/52] drm/omap: Simplify HDMI mode and infoframe configuration Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 21/52] drm/omap: Factor out display type to connector type conversion Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 22/52] drm/omap: Use the drm_panel_bridge API Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 23/52] drm/omap: dss: Fix output next device lookup in DT Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 24/52] drm/omap: Add infrastructure to support drm_bridge local to DSS outputs Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 25/52] drm/omap: dss: Make omap_dss_device_ops optional Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 26/52] drm/omap: hdmi: Allocate EDID in the .read_edid() operation Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 27/52] drm/omap: hdmi4: Rework EDID read to isolate data read Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 28/52] drm/omap: hdmi5: " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 29/52] drm/omap: hdmi4: Register a drm_bridge for EDID read Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 30/52] drm/omap: hdmi5: " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 31/52] drm/omap: hdmi4: Move mode set, enable and disable operations to bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 32/52] drm/omap: hdmi5: " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 33/52] drm/omap: hdmi4: Implement drm_bridge .hpd_notify() operation Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 34/52] drm/omap: dss: Remove .set_hdmi_mode() and .set_infoframe() operations Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 35/52] drm/omap: venc: Register a drm_bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 36/52] drm/omap: Create connector for bridges Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 37/52] drm/omap: Switch the HDMI and VENC outputs to drm_bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 38/52] drm/omap: Remove HPD, detect and EDID omapdss operations Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 39/52] drm/omap: hdmi: Remove omap_dss_device operations Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 40/52] drm/omap: venc: " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 41/52] drm/omap: hdmi4: Simplify EDID read Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 42/52] drm/omap: hdmi5: " Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 43/52] drm/omap: dpi: Sort includes alphabetically Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 44/52] drm/omap: dpi: Reorder functions in sections Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 45/52] drm/omap: dpi: Simplify clock setting API Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 46/52] drm/omap: dpi: Register a drm_bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 47/52] drm/omap: sdi: Sort includes alphabetically Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 48/52] drm/omap: sdi: Register a drm_bridge Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 49/52] drm/omap: Hardcode omap_connector type to DSI Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 50/52] drm/omap: dss: Remove unused omap_dss_device operations Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 51/52] drm/omap: dss: Inline the omapdss_display_get() function Laurent Pinchart
2020-01-24  3:54 ` [PATCH v5 52/52] drm/omap: dss: Remove unused omapdss_of_find_connected_device() function Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200124035445.1830-16-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bbrezillon@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=sam@ravnborg.org \
    --cc=sebastian.reichel@collabora.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.