From: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, Stefan Roese <sr@denx.de>,
<linux@yadro.com>,
Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH v7 19/26] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan
Date: Wed, 29 Jan 2020 18:29:30 +0300 [thread overview]
Message-ID: <20200129152937.311162-20-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20200129152937.311162-1-s.miroshnichenko@yadro.com>
Assure that MPS settings are set up for bridges which are discovered during
manually triggered rescan via sysfs. This sequence of bridge init (using
pci_rescan_bus()) will be used for pciehp hot-add events when BARs are
movable.
Signed-off-by: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
---
drivers/pci/probe.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b810d28ebf96..5f809ddd72b4 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3440,7 +3440,7 @@ static void pci_reassign_root_bus_resources(struct pci_bus *root)
unsigned int pci_rescan_bus(struct pci_bus *bus)
{
unsigned int max;
- struct pci_bus *root = bus;
+ struct pci_bus *root = bus, *child;
while (!pci_is_root_bus(root))
root = root->parent;
@@ -3461,6 +3461,9 @@ unsigned int pci_rescan_bus(struct pci_bus *bus)
pci_assign_unassigned_bus_resources(bus);
}
+ list_for_each_entry(child, &root->children, node)
+ pcie_bus_configure_settings(child);
+
pci_bus_add_devices(bus);
return max;
--
2.24.1
next prev parent reply other threads:[~2020-01-29 15:30 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 15:29 [PATCH v7 00/26] PCI: Allow BAR movement during boot and hotplug Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 01/26] PCI: Fix race condition in pci_enable/disable_device() Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 02/26] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergei Miroshnichenko
2020-01-30 23:12 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 03/26] PCI: hotplug: Initial support of the movable BARs feature Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 04/26] PCI: Add version of release_child_resources() aware of immovable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 05/26] PCI: hotplug: Fix reassigning the released BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 06/26] PCI: hotplug: Recalculate every bridge window during rescan Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 07/26] PCI: hotplug: Don't allow hot-added devices to steal resources Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 08/26] PCI: hotplug: Try to reassign movable BARs only once Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 09/26] PCI: hotplug: Calculate immovable parts of bridge windows Sergei Miroshnichenko
2020-01-30 21:26 ` Bjorn Helgaas
2020-01-31 16:59 ` Sergei Miroshnichenko
2020-01-31 20:10 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 10/26] PCI: Include fixed and immovable BARs into the bus size calculating Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 11/26] PCI: hotplug: movable BARs: Compute limits for relocated bridge windows Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 12/26] PCI: Make sure bridge windows include their fixed BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 13/26] PCI: hotplug: Add support of immovable BARs to pci_assign_resource() Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 14/26] PCI: hotplug: Sort immovable BARs before assignment Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 15/26] PCI: hotplug: Enable the movable BARs feature by default Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 16/26] PCI: Ignore PCIBIOS_MIN_MEM Sergei Miroshnichenko
2020-01-30 23:52 ` Bjorn Helgaas
2020-01-31 18:19 ` Sergei Miroshnichenko
2020-01-31 20:27 ` Bjorn Helgaas
2020-02-05 13:04 ` Sergei Miroshnichenko
2020-02-05 16:32 ` Bjorn Helgaas
2020-02-12 12:16 ` Sergei Miroshnichenko
2020-02-12 14:13 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 17/26] PCI: hotplug: Ignore the MEM BAR offsets from BIOS/bootloader Sergei Miroshnichenko
2020-01-31 20:31 ` Bjorn Helgaas
2020-02-05 11:01 ` Sergei Miroshnichenko
2020-02-05 16:42 ` Bjorn Helgaas
2020-02-12 12:29 ` Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 18/26] PCI: Treat VGA BARs as immovable Sergei Miroshnichenko
2020-01-29 15:29 ` Sergei Miroshnichenko [this message]
2020-01-29 15:29 ` [PATCH v7 20/26] PNP: Don't reserve BARs for PCI when enabled movable BARs Sergei Miroshnichenko
2020-01-30 14:39 ` Rafael J. Wysocki
2020-01-30 21:14 ` Bjorn Helgaas
2020-01-31 15:48 ` Sergei Miroshnichenko
2020-01-31 19:39 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 21/26] PCI: hotplug: Don't disable the released bridge windows immediately Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 22/26] PCI: pciehp: Trigger a domain rescan on hp events when enabled movable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 23/26] PCI: Don't claim immovable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 24/26] PCI: hotplug: Don't reserve bus space when enabled movable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 25/26] nvme-pci: Handle " Sergei Miroshnichenko
2020-01-29 15:29 ` Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 26/26] PCI/portdrv: Declare support of " Sergei Miroshnichenko
2020-01-30 23:37 ` [PATCH v7 00/26] PCI: Allow BAR movement during boot and hotplug Bjorn Helgaas
2020-02-03 4:56 ` Oliver O'Halloran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200129152937.311162-20-s.miroshnichenko@yadro.com \
--to=s.miroshnichenko@yadro.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@yadro.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.