All of lore.kernel.org
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-efi@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
	Javier Martinez Canillas <javierm@redhat.com>,
	Eric Richter <erichte@linux.ibm.com>,
	James Morris <jmorris@namei.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Mimi Zohar <zohar@linux.ibm.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	"Serge E. Hallyn" <serge@hallyn.com>,
	YueHaibing <yuehaibing@huawei.com>,
	linux-security-module@vger.kernel.org
Subject: [RESEND PATCH v2] efi: Only print errors about failing to get certs if EFI vars are found
Date: Mon, 17 Feb 2020 12:39:47 +0100	[thread overview]
Message-ID: <20200217113947.2070436-1-javierm@redhat.com> (raw)

If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs
from the db, dbx and MokListRT EFI variables into the appropriate keyrings.

But it just assumes that the variables will be present and prints an error
if the certs can't be loaded, even when is possible that the variables may
not exist. For example the MokListRT variable will only be present if shim
is used.

So only print an error message about failing to get the certs list from an
EFI variable if this is found. Otherwise these printed errors just pollute
the kernel log ring buffer with confusing messages like the following:

[    5.427251] Couldn't get size: 0x800000000000000e
[    5.427261] MODSIGN: Couldn't get UEFI db list
[    5.428012] Couldn't get size: 0x800000000000000e
[    5.428023] Couldn't get UEFI MokListRT

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>

---

Changes in v2:
- Fix flaws in the logic, that caused the signature list was parsed if
  the return code was EFI_NOT_FOUND that pointed out Hans de Goede.
- Print debug messages if the variables are not found.

 security/integrity/platform_certs/load_uefi.c | 40 ++++++++++++-------
 1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c
index 111898aad56..f0c90824196 100644
--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -35,16 +35,18 @@ static __init bool uefi_check_ignore_db(void)
  * Get a certificate list blob from the named EFI variable.
  */
 static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
-				  unsigned long *size)
+				  unsigned long *size, efi_status_t *status)
 {
-	efi_status_t status;
 	unsigned long lsize = 4;
 	unsigned long tmpdb[4];
 	void *db;
 
-	status = efi.get_variable(name, guid, NULL, &lsize, &tmpdb);
-	if (status != EFI_BUFFER_TOO_SMALL) {
-		pr_err("Couldn't get size: 0x%lx\n", status);
+	*status = efi.get_variable(name, guid, NULL, &lsize, &tmpdb);
+	if (*status == EFI_NOT_FOUND)
+		return NULL;
+
+	if (*status != EFI_BUFFER_TOO_SMALL) {
+		pr_err("Couldn't get size: 0x%lx\n", *status);
 		return NULL;
 	}
 
@@ -52,10 +54,10 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
 	if (!db)
 		return NULL;
 
-	status = efi.get_variable(name, guid, NULL, &lsize, db);
-	if (status != EFI_SUCCESS) {
+	*status = efi.get_variable(name, guid, NULL, &lsize, db);
+	if (*status != EFI_SUCCESS) {
 		kfree(db);
-		pr_err("Error reading db var: 0x%lx\n", status);
+		pr_err("Error reading db var: 0x%lx\n", *status);
 		return NULL;
 	}
 
@@ -74,6 +76,7 @@ static int __init load_uefi_certs(void)
 	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
 	void *db = NULL, *dbx = NULL, *mok = NULL;
 	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
+	efi_status_t status;
 	int rc = 0;
 
 	if (!efi.get_variable)
@@ -83,9 +86,12 @@ static int __init load_uefi_certs(void)
 	 * an error if we can't get them.
 	 */
 	if (!uefi_check_ignore_db()) {
-		db = get_cert_list(L"db", &secure_var, &dbsize);
+		db = get_cert_list(L"db", &secure_var, &dbsize, &status);
 		if (!db) {
-			pr_err("MODSIGN: Couldn't get UEFI db list\n");
+			if (status == EFI_NOT_FOUND)
+				pr_debug("MODSIGN: db variable wasn't found\n");
+			else
+				pr_err("MODSIGN: Couldn't get UEFI db list\n");
 		} else {
 			rc = parse_efi_signature_list("UEFI:db",
 					db, dbsize, get_handler_for_db);
@@ -96,9 +102,12 @@ static int __init load_uefi_certs(void)
 		}
 	}
 
-	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
+	mok = get_cert_list(L"MokListRT", &mok_var, &moksize, &status);
 	if (!mok) {
-		pr_info("Couldn't get UEFI MokListRT\n");
+		if (status == EFI_NOT_FOUND)
+			pr_debug("MokListRT variable wasn't found\n");
+		else
+			pr_info("Couldn't get UEFI MokListRT\n");
 	} else {
 		rc = parse_efi_signature_list("UEFI:MokListRT",
 					      mok, moksize, get_handler_for_db);
@@ -107,9 +116,12 @@ static int __init load_uefi_certs(void)
 		kfree(mok);
 	}
 
-	dbx = get_cert_list(L"dbx", &secure_var, &dbxsize);
+	dbx = get_cert_list(L"dbx", &secure_var, &dbxsize, &status);
 	if (!dbx) {
-		pr_info("Couldn't get UEFI dbx list\n");
+		if (status == EFI_NOT_FOUND)
+			pr_debug("dbx variable wasn't found\n");
+		else
+			pr_info("Couldn't get UEFI dbx list\n");
 	} else {
 		rc = parse_efi_signature_list("UEFI:dbx",
 					      dbx, dbxsize,
-- 
2.24.1


             reply	other threads:[~2020-02-17 11:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-17 11:39 Javier Martinez Canillas [this message]
2020-02-17 13:37 ` [RESEND PATCH v2] efi: Only print errors about failing to get certs if EFI vars are found Ard Biesheuvel
2020-02-28  9:19 ` David Hildenbrand
2020-02-28  9:31   ` David Hildenbrand
2020-02-28  9:35     ` Ard Biesheuvel
2020-02-28  9:35     ` David Hildenbrand
2020-02-28  9:39       ` Ard Biesheuvel
2020-02-28  9:43         ` David Hildenbrand
2020-02-28  9:44           ` Ard Biesheuvel
2020-02-28  9:58             ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200217113947.2070436-1-javierm@redhat.com \
    --to=javierm@redhat.com \
    --cc=erichte@linux.ibm.com \
    --cc=hdegoede@redhat.com \
    --cc=jmorris@namei.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=nayna@linux.ibm.com \
    --cc=serge@hallyn.com \
    --cc=yuehaibing@huawei.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.