All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros
Date: Wed, 26 Feb 2020 03:35:23 +1000	[thread overview]
Message-ID: <20200225173541.1549955-15-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>

These are used infrequently enough they don't provide much help, so
inline them.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------
 1 file changed, 28 insertions(+), 54 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index f4f35d01fe00..feb563416abd 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -110,46 +110,6 @@ name:
 #define EXC_HV		1
 #define EXC_STD		0
 
-/*
- * PPR save/restore macros used in exceptions-64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra)						\
-BEGIN_FTR_SECTION_NESTED(940)						\
-	ld	ra,area+EX_PPR(r13);	/* Read PPR from paca */	\
-	std	ra,_PPR(r1);						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra)					\
-BEGIN_FTR_SECTION_NESTED(941)						\
-	ld	ra,area+EX_PPR(r13);					\
-	mtspr	SPRN_PPR,ra;						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mfspr	ra,spr;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mtspr	spr,ra;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr)				\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	std	ra,offset(r13);						\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
 /*
  * Branch to label using its 0xC000 address. This results in instruction
  * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n
 	cmpwi	r10,KVM_GUEST_MODE_SKIP
 	beq	89f
 	.else
-BEGIN_FTR_SECTION_NESTED(947)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.endif
 
 	ld	r10,PACA_EXGEN+EX_CTR(r13)
 	mtctr	r10
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_PPR(r13)
 	std	r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r11,IAREA+EX_R11(r13)
 	ld	r12,IAREA+EX_R12(r13)
 	std	r12,HSTATE_SCRATCH0(r13)
@@ -386,10 +346,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	SET_SCRATCH0(r13)			/* save r13 */
 	GET_PACA(r13)
 	std	r9,IAREA+EX_R9(r13)		/* save r9 */
-	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	mfspr	r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
 	std	r10,IAREA+EX_R10(r13)		/* save r10 - r12 */
-	OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+	mfspr	r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.if \ool
 	.if !\virt
 	b	tramp_real_\name
@@ -402,8 +366,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	.endif
 	.endif
 
-	OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR)
-	OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+	std	r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	std	r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	INTERRUPT_TO_KERNEL
 	mfctr	r10
 	std	r10,IAREA+EX_CTR(r13)
@@ -558,7 +526,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
 	.endif
 	beq	101f			/* if from kernel mode		*/
 	ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
-	SAVE_PPR(IAREA, r9)
+BEGIN_FTR_SECTION
+	ld	r9,IAREA+EX_PPR(r13)	/* Read PPR from paca		*/
+	std	r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 101:
 	.else
 	.if IKUAP
@@ -598,10 +569,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
 	std	r10,_DSISR(r1)
 	.endif
 
-BEGIN_FTR_SECTION_NESTED(66)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,ORIG_GPR3(r1)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r10,IAREA+EX_CTR(r13)
 	std	r10,_CTR(r1)
 	std	r2,GPR2(r1)		/* save r2 in stackframe	*/
@@ -1683,10 +1654,10 @@ TRAMP_REAL_BEGIN(system_call_kvm)
 	  * HMT_MEDIUM. That allows the KVM code to save that value into the
 	  * guest state (it is the guest's PPR value).
 	  */
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
 	mfspr	r10,SPRN_PPR
 	std	r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
 	mfctr	r10
 	SET_SCRATCH0(r10)
@@ -2241,7 +2212,10 @@ denorm_done:
 	mtspr	SPRN_HSRR0,r11
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)
-	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_PPR(r13)
+	mtspr	SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 BEGIN_FTR_SECTION
 	ld	r10,PACA_EXGEN+EX_CFAR(r13)
 	mtspr	SPRN_CFAR,r10
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 18:19 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53   ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19  9:18   ` Christophe Leroy
2020-03-20  3:39     ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20   ` Segher Boessenkool
2020-02-26  3:39     ` Nicholas Piggin
2020-03-07  0:54     ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27  8:54   ` Christophe Leroy
2021-01-28  0:09     ` Nicholas Piggin
2021-02-03 16:25   ` Christophe Leroy
2021-02-04  3:27     ` Nicholas Piggin
2021-02-04  8:03       ` Christophe Leroy
2021-02-04  8:53         ` Nicholas Piggin
2021-02-05  0:22           ` Michael Ellerman
2021-02-05  2:16             ` Nicholas Piggin
2021-02-05  6:04               ` Christophe Leroy
2021-02-06  2:28                 ` Nicholas Piggin
2021-02-27 10:07   ` Christophe Leroy
2021-03-01  0:47     ` Nicholas Piggin
2021-03-15 13:41   ` Christophe Leroy
2021-03-16  7:36     ` Nicholas Piggin
2021-03-19 11:44       ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20   ` kbuild test robot
2020-03-01 12:20     ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19   ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-24  8:48     ` Nicholas Piggin
2020-03-24  8:48       ` Nicholas Piggin
2020-03-24 19:38       ` Michal Suchánek
2020-03-24 19:38         ` Michal Suchánek
2020-04-03  7:13         ` Nicholas Piggin
2020-04-03  7:13           ` Nicholas Piggin
2020-04-03 10:52           ` Michal Suchánek
2020-04-03 10:52             ` Michal Suchánek
2020-04-03 11:26             ` Nicholas Piggin
2020-04-03 11:26               ` Nicholas Piggin
2020-04-03 11:51               ` Michal Suchánek
2020-04-03 11:51                 ` Michal Suchánek
2020-04-06 20:52           ` Michal Suchánek
2020-04-06 20:52             ` Michal Suchánek
2020-04-06 21:00           ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-06 21:00             ` Michal Suchanek
2020-04-07  5:21             ` Christophe Leroy
2020-04-07  5:21               ` Christophe Leroy
2020-04-09 11:22               ` Michal Suchánek
2020-04-09 11:22                 ` Michal Suchánek
2020-03-19 12:19   ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-24  8:54     ` Nicholas Piggin
2020-03-24  8:54       ` Nicholas Piggin
2020-03-24 19:30       ` Michal Suchánek
2020-03-24 19:30         ` Michal Suchánek
2020-04-03  7:16         ` Nicholas Piggin
2020-04-03  7:16           ` Nicholas Piggin
2020-03-19 12:19   ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 13:37     ` Andy Shevchenko
2020-03-19 13:37       ` Andy Shevchenko
2020-03-19 14:00       ` Michal Suchánek
2020-03-19 14:00         ` Michal Suchánek
2020-03-19 14:26         ` Andy Shevchenko
2020-03-19 14:26           ` Andy Shevchenko
2020-03-19 17:03     ` Joe Perches
2020-03-19 17:03       ` Joe Perches
2020-03-19 12:36   ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 12:36     ` Christophe Leroy
2020-03-19 14:01     ` Michal Suchánek
2020-03-19 14:01       ` Michal Suchánek
2020-04-03  7:25   ` Nicholas Piggin
2020-04-03  7:25     ` Nicholas Piggin
2020-04-03  7:26     ` Christophe Leroy
2020-04-03  7:26       ` Christophe Leroy
2020-04-03  9:43       ` Nicholas Piggin
2020-04-03  9:43         ` Nicholas Piggin
2020-04-05  0:40         ` Michael Ellerman
2020-04-05  0:40           ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20   ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-04-06 13:05     ` Michael Ellerman
2020-03-20 10:20   ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-04-07  5:50     ` Christophe Leroy
2020-04-07  5:50       ` Christophe Leroy
2020-04-07  9:57       ` Michal Suchánek
2020-04-07  9:57         ` Michal Suchánek
2020-03-20 10:20   ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:33     ` Andy Shevchenko
2020-03-20 10:33       ` Andy Shevchenko
2020-03-20 11:23       ` Michal Suchánek
2020-03-20 11:23         ` Michal Suchánek
2020-03-20 12:42         ` Andy Shevchenko
2020-03-20 12:42           ` Andy Shevchenko
2020-03-20 14:42           ` Joe Perches
2020-03-20 14:42             ` Joe Perches
2020-03-20 16:28             ` Michal Suchánek
2020-03-20 16:28               ` Michal Suchánek
2020-03-20 16:31             ` Andy Shevchenko
2020-03-20 16:31               ` Andy Shevchenko
2020-03-20 16:42               ` Michal Suchánek
2020-03-20 16:42                 ` Michal Suchánek
2020-03-20 16:47                 ` Andy Shevchenko
2020-03-20 16:47                   ` Andy Shevchenko
2020-03-20 21:36               ` Joe Perches
2020-03-20 21:36                 ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225173541.1549955-15-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msuchanek@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.