All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Bastien Nocera <hadess@hadess.net>
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-input@vger.kernel.org, Dmitry Mastykin <mastichi@gmail.com>
Subject: [PATCH v2 08/11] Input: goodix - Save a copy of the config from goodix_read_config()
Date: Thu,  5 Mar 2020 23:01:29 +0100	[thread overview]
Message-ID: <20200305220132.228722-8-hdegoede@redhat.com> (raw)
In-Reply-To: <20200305220132.228722-1-hdegoede@redhat.com>

Save a copy of the config in goodix_read_config(), this is a preparation
patch for restoring the config if it was lost after a supend/resume cycle.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317
BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207
Cc: Dmitry Mastykin <mastichi@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- s/fix_config/calc_config_checksum/
- Add a comment explaining that the "ts->config[raw_cfg_len + 1] = 1" lines
  are setting the "config_fresh" bit
---
 drivers/input/touchscreen/goodix.c | 47 ++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index e6233d8695b2..62849a81224c 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -72,6 +72,7 @@ struct goodix_chip_data {
 	u16 config_addr;
 	int config_len;
 	int (*check_config)(struct goodix_ts_data *, const struct firmware *);
+	void (*calc_config_checksum)(struct goodix_ts_data *ts);
 };
 
 struct goodix_ts_data {
@@ -96,35 +97,42 @@ struct goodix_ts_data {
 	unsigned long irq_flags;
 	enum goodix_irq_pin_access_method irq_pin_access_method;
 	unsigned int contact_size;
+	u8 config[GOODIX_CONFIG_MAX_LENGTH];
 };
 
 static int goodix_check_cfg_8(struct goodix_ts_data *ts,
 			const struct firmware *cfg);
 static int goodix_check_cfg_16(struct goodix_ts_data *ts,
 			const struct firmware *cfg);
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts);
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts);
 
 static const struct goodix_chip_data gt1x_chip_data = {
 	.config_addr		= GOODIX_GT1X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_MAX_LENGTH,
 	.check_config		= goodix_check_cfg_16,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_16,
 };
 
 static const struct goodix_chip_data gt911_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_911_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
 };
 
 static const struct goodix_chip_data gt967_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_967_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
 };
 
 static const struct goodix_chip_data gt9x_chip_data = {
 	.config_addr		= GOODIX_GT9X_REG_CONFIG_DATA,
 	.config_len		= GOODIX_CONFIG_MAX_LENGTH,
 	.check_config		= goodix_check_cfg_8,
+	.calc_config_checksum	= goodix_calc_cfg_checksum_8,
 };
 
 static const unsigned long goodix_irq_flags[] = {
@@ -442,6 +450,19 @@ static int goodix_check_cfg_8(struct goodix_ts_data *ts,
 	return 0;
 }
 
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts)
+{
+	int i, raw_cfg_len = ts->chip->config_len - 2;
+	u8 check_sum = 0;
+
+	for (i = 0; i < raw_cfg_len; i++)
+		check_sum += ts->config[i];
+	check_sum = (~check_sum) + 1;
+
+	ts->config[raw_cfg_len] = check_sum;
+	ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */
+}
+
 static int goodix_check_cfg_16(struct goodix_ts_data *ts,
 			const struct firmware *cfg)
 {
@@ -466,6 +487,19 @@ static int goodix_check_cfg_16(struct goodix_ts_data *ts,
 	return 0;
 }
 
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts)
+{
+	int i, raw_cfg_len = ts->chip->config_len - 3;
+	u16 check_sum = 0;
+
+	for (i = 0; i < raw_cfg_len; i += 2)
+		check_sum += get_unaligned_be16(&ts->config[i]);
+	check_sum = (~check_sum) + 1;
+
+	put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]);
+	ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */
+}
+
 /**
  * goodix_check_cfg - Checks if config fw is valid
  *
@@ -843,12 +877,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
  */
 static void goodix_read_config(struct goodix_ts_data *ts)
 {
-	u8 config[GOODIX_CONFIG_MAX_LENGTH];
 	int x_max, y_max;
 	int error;
 
 	error = goodix_i2c_read(ts->client, ts->chip->config_addr,
-				config, ts->chip->config_len);
+				ts->config, ts->chip->config_len);
 	if (error) {
 		dev_warn(&ts->client->dev, "Error reading config: %d\n",
 			 error);
@@ -857,15 +890,17 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		return;
 	}
 
-	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
-	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
 
-	x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
-	y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+	x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]);
+	y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]);
 	if (x_max && y_max) {
 		input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1);
 		input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1);
 	}
+
+	ts->chip->calc_config_checksum(ts);
 }
 
 /**
-- 
2.25.1


  parent reply	other threads:[~2020-03-05 22:01 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-05 22:01 [PATCH v2 01/11] Input: goodix - Refactor IRQ pin GPIO accesses Hans de Goede
2020-03-05 22:01 ` [PATCH v2 02/11] Input: goodix - Make loading the config from disk independent from the GPIO setup Hans de Goede
2020-03-06  4:04   ` Dmitry Torokhov
2020-03-06  9:01     ` Hans de Goede
2020-03-07  0:14       ` Dmitry Torokhov
2020-03-05 22:01 ` [PATCH v2 03/11] Input: goodix - Make resetting the controller at probe " Hans de Goede
2020-03-05 22:01 ` [PATCH v2 04/11] Input: goodix - Add support for getting IRQ + reset GPIOs on Cherry Trail devices Hans de Goede
2020-03-05 22:01 ` [PATCH v2 05/11] Input: goodix - Add support for getting IRQ + reset GPIOs on Bay " Hans de Goede
2020-03-05 22:01 ` [PATCH v2 06/11] Input: goodix - Add support for controlling the IRQ pin through ACPI methods Hans de Goede
2020-03-05 22:01 ` [PATCH v2 07/11] Input: goodix - Move defines to above struct goodix_ts_data declaration Hans de Goede
2020-03-05 22:01 ` Hans de Goede [this message]
2020-03-05 22:01 ` [PATCH v2 09/11] Input: goodix - Add minimum firmware size check Hans de Goede
2020-03-05 22:01 ` [PATCH v2 10/11] Input: goodix - Make goodix_send_cfg() take a raw buffer as argument Hans de Goede
2020-03-05 22:01 ` [PATCH v2 11/11] Input: goodix - Restore config on resume if necessary Hans de Goede
2020-03-06  4:03 ` [PATCH v2 01/11] Input: goodix - Refactor IRQ pin GPIO accesses Dmitry Torokhov
2020-03-06  8:54   ` Hans de Goede
2020-03-06 23:58     ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200305220132.228722-8-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hadess@hadess.net \
    --cc=linux-input@vger.kernel.org \
    --cc=mastichi@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.