From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <jic23@kernel.org>, <robh+dt@kernel.org>,
<Laszlo.Nagy@analog.com>, <Andrei.Grozav@analog.com>,
<Michael.Hennerich@analog.com>, <Istvan.Csomortani@analog.com>,
<Adrian.Costina@analog.com>, <Dragos.Bogdan@analog.com>,
Michael Hennerich <michael.hennerich@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v12 7/8] iio: adc: ad9467: add support AD9467 ADC
Date: Sun, 22 Mar 2020 19:53:24 +0200 [thread overview]
Message-ID: <20200322175325.42469-8-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20200322175325.42469-1-alexandru.ardelean@analog.com>
From: Michael Hennerich <michael.hennerich@analog.com>
The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter
(ADC). It is optimized for high performanceover wide bandwidths and ease of
use. The product operates at a 250 MSPS conversion rate and is designed for
wireless receivers, instrumentation, and test equipment that require a high
dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low
voltage differential input clock for full performance operation. No
external reference or driver components are required for many applications.
Data outputs are LVDS compatible (ANSI-644 compatible) and include the
means to reduce the overall current needed for short trace distances.
Since the chip can operate at such high sample-rates (much higher than
classical interfaces), it requires that a DMA controller be used to
interface directly to the chip and push data into memory.
Typically, the AXI ADC IP core is used to interface with it.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/adc/Kconfig | 15 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad9467.c | 420 +++++++++++++++++++++++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 drivers/iio/adc/ad9467.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 445070abf376..a0796510f9d4 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,21 @@ config AD799X
To compile this driver as a module, choose M here: the module will be
called ad799x.
+config AD9467
+ tristate "Analog Devices AD9467 High Speed ADC driver"
+ depends on SPI
+ select ADI_AXI_ADC
+ help
+ Say yes here to build support for Analog Devices:
+ * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
+
+ The driver requires the assistance of the AXI ADC IP core to operate,
+ since SPI is used for configuration only, while data has to be
+ streamed into memory via DMA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad9467.
+
config ADI_AXI_ADC
tristate "Analog Devices Generic AXI ADC IP core driver"
select IIO_BUFFER
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 7c6594d049f9..59722770a654 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD7949) += ad7949.o
obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_AD9467) += ad9467.o
obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
new file mode 100644
index 000000000000..82f6235a9288
--- /dev/null
+++ b/drivers/iio/adc/ad9467.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD9467 SPI ADC driver
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/clk.h>
+
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/*
+ * ADI High-Speed ADC common spi interface registers
+ * See Application-Note AN-877:
+ * https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+ */
+
+#define AN877_ADC_REG_CHIP_PORT_CONF 0x00
+#define AN877_ADC_REG_CHIP_ID 0x01
+#define AN877_ADC_REG_CHIP_GRADE 0x02
+#define AN877_ADC_REG_CHAN_INDEX 0x05
+#define AN877_ADC_REG_TRANSFER 0xFF
+#define AN877_ADC_REG_MODES 0x08
+#define AN877_ADC_REG_TEST_IO 0x0D
+#define AN877_ADC_REG_ADC_INPUT 0x0F
+#define AN877_ADC_REG_OFFSET 0x10
+#define AN877_ADC_REG_OUTPUT_MODE 0x14
+#define AN877_ADC_REG_OUTPUT_ADJUST 0x15
+#define AN877_ADC_REG_OUTPUT_PHASE 0x16
+#define AN877_ADC_REG_OUTPUT_DELAY 0x17
+#define AN877_ADC_REG_VREF 0x18
+#define AN877_ADC_REG_ANALOG_INPUT 0x2C
+
+/* AN877_ADC_REG_TEST_IO */
+#define AN877_ADC_TESTMODE_OFF 0x0
+#define AN877_ADC_TESTMODE_MIDSCALE_SHORT 0x1
+#define AN877_ADC_TESTMODE_POS_FULLSCALE 0x2
+#define AN877_ADC_TESTMODE_NEG_FULLSCALE 0x3
+#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD 0x4
+#define AN877_ADC_TESTMODE_PN23_SEQ 0x5
+#define AN877_ADC_TESTMODE_PN9_SEQ 0x6
+#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE 0x7
+#define AN877_ADC_TESTMODE_USER 0x8
+#define AN877_ADC_TESTMODE_BIT_TOGGLE 0x9
+#define AN877_ADC_TESTMODE_SYNC 0xA
+#define AN877_ADC_TESTMODE_ONE_BIT_HIGH 0xB
+#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY 0xC
+#define AN877_ADC_TESTMODE_RAMP 0xF
+
+/* AN877_ADC_REG_TRANSFER */
+#define AN877_ADC_TRANSFER_SYNC 0x1
+
+/* AN877_ADC_REG_OUTPUT_MODE */
+#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY 0x0
+#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT 0x1
+#define AN877_ADC_OUTPUT_MODE_GRAY_CODE 0x2
+
+/* AN877_ADC_REG_OUTPUT_PHASE */
+#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN 0x20
+#define AN877_ADC_INVERT_DCO_CLK 0x80
+
+/* AN877_ADC_REG_OUTPUT_DELAY */
+#define AN877_ADC_DCO_DELAY_ENABLE 0x80
+
+/*
+ * Analog Devices AD9467 16-Bit, 200/250 MSPS ADC
+ */
+
+#define CHIPID_AD9467 0x50
+#define AD9467_DEF_OUTPUT_MODE 0x08
+#define AD9467_REG_VREF_MASK 0x0F
+
+enum {
+ ID_AD9467,
+};
+
+struct ad9467_state {
+ struct spi_device *spi;
+ struct clk *clk;
+ unsigned int output_mode;
+
+ struct gpio_desc *pwrdown_gpio;
+ struct gpio_desc *reset_gpio;
+};
+
+static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
+{
+ unsigned char tbuf[2], rbuf[1];
+ int ret;
+
+ tbuf[0] = 0x80 | (reg >> 8);
+ tbuf[1] = reg & 0xFF;
+
+ ret = spi_write_then_read(spi,
+ tbuf, ARRAY_SIZE(tbuf),
+ rbuf, ARRAY_SIZE(rbuf));
+
+ if (ret < 0)
+ return ret;
+
+ return rbuf[0];
+}
+
+static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
+ unsigned int val)
+{
+ unsigned char buf[3];
+
+ buf[0] = reg >> 8;
+ buf[1] = reg & 0xFF;
+ buf[2] = val;
+
+ return spi_write(spi, buf, ARRAY_SIZE(buf));
+}
+
+static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ struct spi_device *spi = st->spi;
+ int ret;
+
+ if (readval == NULL) {
+ ret = ad9467_spi_write(spi, reg, writeval);
+ ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return ret;
+ }
+
+ ret = ad9467_spi_read(spi, reg);
+ if (ret < 0)
+ return ret;
+ *readval = ret;
+
+ return 0;
+}
+
+static const unsigned int ad9467_scale_table[][2] = {
+ {2000, 0}, {2100, 6}, {2200, 7},
+ {2300, 8}, {2400, 9}, {2500, 10},
+};
+
+static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
+ unsigned int *val, unsigned int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ const struct iio_chan_spec *chan = &info->channels[0];
+ unsigned int tmp;
+
+ tmp = (info->scale_table[index][0] * 1000000ULL) >>
+ chan->scan_type.realbits;
+ *val = tmp / 1000000;
+ *val2 = tmp % 1000000;
+}
+
+#define AD9467_CHAN(_chan, _si, _bits, _sign) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = _chan, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = _sign, \
+ .realbits = _bits, \
+ .storagebits = 16, \
+ }, \
+}
+
+static const struct iio_chan_spec ad9467_channels[] = {
+ AD9467_CHAN(0, 0, 16, 'S'),
+};
+
+static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = {
+ [ID_AD9467] = {
+ .id = CHIPID_AD9467,
+ .max_rate = 250000000UL,
+ .scale_table = ad9467_scale_table,
+ .num_scales = ARRAY_SIZE(ad9467_scale_table),
+ .channels = ad9467_channels,
+ .num_channels = ARRAY_SIZE(ad9467_channels),
+ },
+};
+
+static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int i, vref_val, vref_mask;
+
+ vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
+
+ switch (info->id) {
+ case CHIPID_AD9467:
+ vref_mask = AD9467_REG_VREF_MASK;
+ break;
+ default:
+ vref_mask = 0xFFFF;
+ break;
+ }
+
+ vref_val &= vref_mask;
+
+ for (i = 0; i < info->num_scales; i++) {
+ if (vref_val == info->scale_table[i][1])
+ break;
+ }
+
+ if (i == info->num_scales)
+ return -ERANGE;
+
+ __ad9467_get_scale(conv, i, val, val2);
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int scale_val[2];
+ unsigned int i;
+
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < info->num_scales; i++) {
+ __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
+ if (scale_val[0] != val || scale_val[1] != val2)
+ continue;
+
+ ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
+ info->scale_table[i][1]);
+ ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_get_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = clk_get_rate(st->clk);
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned long r_clk;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_set_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ r_clk = clk_round_rate(st->clk, val);
+ if (r_clk < 0 || r_clk > info->max_rate) {
+ dev_warn(&st->spi->dev,
+ "Error setting ADC sample rate %ld", r_clk);
+ return -EINVAL;
+ }
+
+ return clk_set_rate(st->clk, r_clk);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
+{
+ int ret;
+
+ ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
+ if (ret < 0)
+ return ret;
+
+ return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ return ad9467_outputmode_set(st->spi, st->output_mode);
+}
+
+static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id)
+{
+ switch (chip_id) {
+ case CHIPID_AD9467:
+ st->output_mode = AD9467_DEF_OUTPUT_MODE |
+ AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void ad9467_clk_disable(void *data)
+{
+ struct ad9467_state *st = data;
+
+ clk_disable_unprepare(st->clk);
+}
+
+static int ad9467_probe(struct spi_device *spi)
+{
+ const struct adi_axi_adc_chip_info *info;
+ struct adi_axi_adc_conv *conv;
+ struct ad9467_state *st;
+ unsigned int id;
+ int ret;
+
+ info = of_device_get_match_data(&spi->dev);
+ if (!info)
+ return -ENODEV;
+
+ conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
+ if (IS_ERR(conv))
+ return PTR_ERR(conv);
+
+ st = adi_axi_adc_conv_priv(conv);
+ st->spi = spi;
+
+ st->clk = devm_clk_get(&spi->dev, "adc-clk");
+ if (IS_ERR(st->clk))
+ return PTR_ERR(st->clk);
+
+ ret = clk_prepare_enable(st->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
+ if (ret)
+ return ret;
+
+ st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->pwrdown_gpio))
+ return PTR_ERR(st->pwrdown_gpio);
+
+ st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->reset_gpio))
+ return PTR_ERR(st->reset_gpio);
+
+ if (st->reset_gpio) {
+ udelay(1);
+ ret = gpiod_direction_output(st->reset_gpio, 1);
+ mdelay(10);
+ }
+
+ spi_set_drvdata(spi, st);
+
+ conv->chip_info = info;
+
+ id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
+ if (id != conv->chip_info->id) {
+ dev_err(&spi->dev, "Unrecognized CHIP_ID 0x%X\n", id);
+ return -ENODEV;
+ }
+
+ conv->reg_access = ad9467_reg_access;
+ conv->write_raw = ad9467_write_raw;
+ conv->read_raw = ad9467_read_raw;
+ conv->preenable_setup = ad9467_preenable_setup;
+
+ return ad9467_setup(st, id);
+}
+
+static const struct of_device_id ad9467_of_match[] = {
+ { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ad9467_of_match);
+
+static struct spi_driver ad9467_driver = {
+ .driver = {
+ .name = "ad9467",
+ .of_match_table = ad9467_of_match,
+ },
+ .probe = ad9467_probe,
+};
+module_spi_driver(ad9467_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2020-03-22 17:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 2/8] include: fpga: adi-axi-common.h: add version helper macros Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align) Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver Alexandru Ardelean
2020-03-22 17:53 ` Alexandru Ardelean [this message]
2020-03-22 17:53 ` [PATCH v12 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC Alexandru Ardelean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200322175325.42469-8-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=Adrian.Costina@analog.com \
--cc=Andrei.Grozav@analog.com \
--cc=Dragos.Bogdan@analog.com \
--cc=Istvan.Csomortani@analog.com \
--cc=Laszlo.Nagy@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.