Re: [Intel-gfx] [PATCH v20 07/10] drm/i915: Added required new PCode commands

From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: jani.nikula@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v20 07/10] drm/i915: Added required new PCode commands
Date: Thu, 2 Apr 2020 20:27:50 +0300	[thread overview]
Message-ID: <20200402172750.GE13686@intel.com> (raw)
In-Reply-To: <20200326181005.11775-8-stanislav.lisovskiy@intel.com>

On Thu, Mar 26, 2020 at 08:10:02PM +0200, Stanislav Lisovskiy wrote:
> We need a new PCode request commands and reply codes
> to be added as a prepartion patch for QGV points
> restricting for new SAGV support.
> 
> v2: - Extracted those changes into separate patch
>       (Ville Syrjälä)
> 
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h       | 4 ++++
>  drivers/gpu/drm/i915/intel_sideband.c | 2 ++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 9c53fe918be6..1a61db746c7e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -8994,6 +8994,7 @@ enum {
>  #define     GEN7_PCODE_ILLEGAL_DATA		0x3
>  #define     GEN11_PCODE_ILLEGAL_SUBCOMMAND	0x4
>  #define     GEN11_PCODE_LOCKED			0x6
> +#define     GEN11_PCODE_REJECTED		0x11
>  #define     GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
>  #define   GEN6_PCODE_WRITE_RC6VIDS		0x4
>  #define   GEN6_PCODE_READ_RC6VIDS		0x5
> @@ -9015,6 +9016,7 @@ enum {
>  #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
>  #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
>  #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
> +#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
>  #define   GEN6_PCODE_READ_D_COMP		0x10
>  #define   GEN6_PCODE_WRITE_D_COMP		0x11
>  #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
> @@ -9027,6 +9029,8 @@ enum {
>  #define     GEN9_SAGV_IS_DISABLED		0x1
>  #define     GEN9_SAGV_ENABLE			0x3
>  #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
> +#define GEN11_PCODE_POINTS_RESTRICTED		0x0
> +#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1

What are these? The indentation makes me thingk they are new commands,
but the placement totally disagrees with that.

>  #define GEN6_PCODE_DATA				_MMIO(0x138128)
>  #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
>  #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
> diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
> index 1447e7516cb7..1e7dd6b6f103 100644
> --- a/drivers/gpu/drm/i915/intel_sideband.c
> +++ b/drivers/gpu/drm/i915/intel_sideband.c
> @@ -370,6 +370,8 @@ static inline int gen7_check_mailbox_status(u32 mbox)
>  		return -ENXIO;
>  	case GEN11_PCODE_LOCKED:
>  		return -EBUSY;
> +	case GEN11_PCODE_REJECTED:
> +		return -EACCES;
>  	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
>  		return -EOVERFLOW;
>  	default:
> -- 
> 2.24.1.485.gad05a3d8e5

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx