All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, kraxel@redhat.com,
	noralf@tronnes.org, sam@ravnborg.org, emil.velikov@collabora.com,
	john.p.donnelly@oracle.com
Cc: John Donnelly <John.p.donnelly@oracle.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v3 13/15] drm/mgag200: Use simple-display data structures
Date: Fri, 15 May 2020 10:32:31 +0200	[thread overview]
Message-ID: <20200515083233.32036-14-tzimmermann@suse.de> (raw)
In-Reply-To: <20200515083233.32036-1-tzimmermann@suse.de>

The MGA CRTC data structure struct mga_crtc contains unused additional
fields; so it can removed. The standard DRM CRTC and encoder structures
are embedded now in struct drm_simple_display_pipe. Done in preparation
of converting mgag200 to simple KMS helpers.

v3:
	* remove now-unused define MGAG200FB_CONN_LIMIT
	* remove unused define MATROX_DPMS_CLEARED

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
---
 drivers/gpu/drm/mgag200/mgag200_drv.h  | 15 ++------------
 drivers/gpu/drm/mgag200/mgag200_mode.c | 28 ++++++--------------------
 2 files changed, 8 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index 0cf498d1e900c..d929ca3a767a3 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -19,6 +19,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem.h>
 #include <drm/drm_gem_vram_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mgag200_reg.h"
 
@@ -32,8 +33,6 @@
 #define DRIVER_MINOR		0
 #define DRIVER_PATCHLEVEL	0
 
-#define MGAG200FB_CONN_LIMIT 1
-
 #define RREG8(reg) ioread8(((void __iomem *)mdev->rmmio) + (reg))
 #define WREG8(reg, v) iowrite8(v, ((void __iomem *)mdev->rmmio) + (reg))
 #define RREG32(reg) ioread32(((void __iomem *)mdev->rmmio) + (reg))
@@ -103,18 +102,8 @@
 #define MGAG200_MAX_FB_HEIGHT 4096
 #define MGAG200_MAX_FB_WIDTH 4096
 
-#define MATROX_DPMS_CLEARED (-1)
-
-#define to_mga_crtc(x) container_of(x, struct mga_crtc, base)
 #define to_mga_connector(x) container_of(x, struct mga_connector, base)
 
-struct mga_crtc {
-	struct drm_crtc base;
-	u8 lut_r[256], lut_g[256], lut_b[256];
-	int last_dpms;
-	bool enabled;
-};
-
 struct mga_i2c_chan {
 	struct i2c_adapter adapter;
 	struct drm_device *dev;
@@ -175,7 +164,7 @@ struct mga_device {
 	u32 unique_rev_id;
 
 	struct mga_connector connector;
-	struct drm_encoder encoder;
+	struct drm_simple_display_pipe display_pipe;
 };
 
 static inline struct mga_device *to_mga_device(struct drm_device *dev)
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index d6f9763a4a450..00bbc1f9b7db3 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1475,15 +1475,6 @@ static int mga_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 	return 0;
 }
 
-/* Simple cleanup function */
-static void mga_crtc_destroy(struct drm_crtc *crtc)
-{
-	struct mga_crtc *mga_crtc = to_mga_crtc(crtc);
-
-	drm_crtc_cleanup(crtc);
-	kfree(mga_crtc);
-}
-
 static void mga_crtc_disable(struct drm_crtc *crtc)
 {
 	DRM_DEBUG_KMS("\n");
@@ -1501,7 +1492,7 @@ static void mga_crtc_disable(struct drm_crtc *crtc)
 static const struct drm_crtc_funcs mga_crtc_funcs = {
 	.gamma_set = mga_crtc_gamma_set,
 	.set_config = drm_crtc_helper_set_config,
-	.destroy = mga_crtc_destroy,
+	.destroy = drm_crtc_cleanup,
 };
 
 static const struct drm_crtc_helper_funcs mga_helper_funcs = {
@@ -1517,20 +1508,13 @@ static const struct drm_crtc_helper_funcs mga_helper_funcs = {
 static void mga_crtc_init(struct mga_device *mdev)
 {
 	struct drm_device *dev = mdev->dev;
-	struct mga_crtc *mga_crtc;
-
-	mga_crtc = kzalloc(sizeof(struct mga_crtc) +
-			      (MGAG200FB_CONN_LIMIT * sizeof(struct drm_connector *)),
-			      GFP_KERNEL);
-
-	if (mga_crtc == NULL)
-		return;
+	struct drm_crtc *crtc = &mdev->display_pipe.crtc;
 
-	drm_crtc_init(dev, &mga_crtc->base, &mga_crtc_funcs);
+	drm_crtc_init(dev, crtc, &mga_crtc_funcs);
 
-	drm_mode_crtc_set_gamma_size(&mga_crtc->base, MGAG200_LUT_SIZE);
+	drm_mode_crtc_set_gamma_size(crtc, MGAG200_LUT_SIZE);
 
-	drm_crtc_helper_add(&mga_crtc->base, &mga_helper_funcs);
+	drm_crtc_helper_add(crtc, &mga_helper_funcs);
 }
 
 /*
@@ -1718,7 +1702,7 @@ static unsigned int mgag200_preferred_depth(struct mga_device *mdev)
 int mgag200_modeset_init(struct mga_device *mdev)
 {
 	struct drm_device *dev = mdev->dev;
-	struct drm_encoder *encoder = &mdev->encoder;
+	struct drm_encoder *encoder = &mdev->display_pipe.encoder;
 	struct drm_connector *connector = &mdev->connector.base;
 	int ret;
 
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-05-15  8:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  8:32 [PATCH v3 00/15] drm/mgag200: Convert to atomic modesetting Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 01/15] drm/mgag200: Remove HW cursor Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 02/15] drm/mgag200: Clean up mga_set_start_address() Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 03/15] drm/mgag200: Clean up mga_crtc_do_set_base() Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 04/15] drm/mgag200: Move mode-setting code into separate helper function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 05/15] drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O Thomas Zimmermann
2020-06-03  9:09   ` [drm/mgag200] e44e907dd8: phoronix-test-suite.glmark2.800x600.score -64.9% regression kernel test robot
2020-06-03  9:09     ` kernel test robot
2020-06-15 20:58     ` Emil Velikov
2020-06-16  3:10       ` Rong Chen
2020-06-16  3:10         ` Rong Chen
2020-06-16  3:29         ` [LKP] " Rong Chen
2020-06-16  3:29           ` Rong Chen
2020-06-16 13:49         ` Emil Velikov
2020-06-17  1:35           ` Rong Chen
2020-06-17  1:35             ` Rong Chen
2020-06-16 13:49         ` Thomas Zimmermann
2020-06-16 13:49           ` Thomas Zimmermann
2020-06-17  1:42           ` Rong Chen
2020-06-17  1:42             ` Rong Chen
2020-06-16 14:24       ` Thomas Zimmermann
2020-06-16 14:24         ` Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 06/15] drm/mgag200: Update mode registers after plane registers Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 07/15] drm/mgag200: Set pitch in a separate helper function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 08/15] drm/mgag200: Set primary plane's format in " Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 09/15] drm/mgag200: Move TAGFIFO reset into separate function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 10/15] drm/mgag200: Move hiprilvl setting into separate functions Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 11/15] drm/mgag200: Move register initialization into separate function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 12/15] drm/mgag200: Remove out-commented suspend/resume helpers Thomas Zimmermann
2020-05-15  8:32 ` Thomas Zimmermann [this message]
2020-05-15  8:32 ` [PATCH v3 14/15] drm/mgag200: Convert to simple KMS helper Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 15/15] drm/mgag200: Replace VRAM helpers with SHMEM helpers Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515083233.32036-14-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.velikov@collabora.com \
    --cc=john.p.donnelly@oracle.com \
    --cc=kraxel@redhat.com \
    --cc=noralf@tronnes.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.