Re: [PATCH 3/9] fs/ext4: Disallow encryption if inode is DAX

From: Eric Biggers <ebiggers@kernel.org>
To: Ira Weiny <ira.weiny@intel.com>
Cc: linux-ext4@vger.kernel.org,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	"Theodore Y. Ts'o" <tytso@mit.edu>, Jan Kara <jack@suse.cz>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>,
	Christoph Hellwig <hch@lst.de>, Jeff Moyer <jmoyer@redhat.com>,
	"Darrick J. Wong" <darrick.wong@oracle.com>,
	linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/9] fs/ext4: Disallow encryption if inode is DAX
Date: Mon, 18 May 2020 09:24:47 -0700	[thread overview]
Message-ID: <20200518162447.GA954@sol.localdomain> (raw)
In-Reply-To: <20200518050315.GA3025231@iweiny-DESK2.sc.intel.com>

On Sun, May 17, 2020 at 10:03:15PM -0700, Ira Weiny wrote:
> On Fri, May 15, 2020 at 07:02:53PM -0700, Eric Biggers wrote:
> > On Tue, May 12, 2020 at 10:43:18PM -0700, ira.weiny@intel.com wrote:
> > > From: Ira Weiny <ira.weiny@intel.com>
> > > 
> > > Encryption and DAX are incompatible.  Changing the DAX mode due to a
> > > change in Encryption mode is wrong without a corresponding
> > > address_space_operations update.
> > > 
> > > Make the 2 options mutually exclusive by returning an error if DAX was
> > > set first.
> > > 
> > > Furthermore, clarify the documentation of the exclusivity and how that
> > > will work.
> > > 
> > > Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> > > 
> > > ---
> > > Changes:
> > > 	remove WARN_ON_ONCE
> > > 	Add documentation to the encrypt doc WRT DAX
> > > ---
> > >  Documentation/filesystems/fscrypt.rst |  4 +++-
> > >  fs/ext4/super.c                       | 10 +---------
> > >  2 files changed, 4 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst
> > > index aa072112cfff..1475b8d52fef 100644
> > > --- a/Documentation/filesystems/fscrypt.rst
> > > +++ b/Documentation/filesystems/fscrypt.rst
> > > @@ -1038,7 +1038,9 @@ astute users may notice some differences in behavior:
> > >  - The ext4 filesystem does not support data journaling with encrypted
> > >    regular files.  It will fall back to ordered data mode instead.
> > >  
> > > -- DAX (Direct Access) is not supported on encrypted files.
> > > +- DAX (Direct Access) is not supported on encrypted files.  Attempts to enable
> > > +  DAX on an encrypted file will fail.  Mount options will _not_ enable DAX on
> > > +  encrypted files.
> > >  
> > >  - The st_size of an encrypted symlink will not necessarily give the
> > >    length of the symlink target as required by POSIX.  It will actually
> > > diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> > > index bf5fcb477f66..9873ab27e3fa 100644
> > > --- a/fs/ext4/super.c
> > > +++ b/fs/ext4/super.c
> > > @@ -1320,7 +1320,7 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
> > >  	if (inode->i_ino == EXT4_ROOT_INO)
> > >  		return -EPERM;
> > >  
> > > -	if (WARN_ON_ONCE(IS_DAX(inode) && i_size_read(inode)))
> > > +	if (IS_DAX(inode))
> > >  		return -EINVAL;
> > >  
> > >  	res = ext4_convert_inline_data(inode);
> > > @@ -1344,10 +1344,6 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
> > >  			ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT);
> > >  			ext4_clear_inode_state(inode,
> > >  					EXT4_STATE_MAY_INLINE_DATA);
> > > -			/*
> > > -			 * Update inode->i_flags - S_ENCRYPTED will be enabled,
> > > -			 * S_DAX may be disabled
> > > -			 */
> > >  			ext4_set_inode_flags(inode);
> > >  		}
> > >  		return res;
> > > @@ -1371,10 +1367,6 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
> > >  				    ctx, len, 0);
> > >  	if (!res) {
> > >  		ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT);
> > > -		/*
> > > -		 * Update inode->i_flags - S_ENCRYPTED will be enabled,
> > > -		 * S_DAX may be disabled
> > > -		 */
> > >  		ext4_set_inode_flags(inode);
> > >  		res = ext4_mark_inode_dirty(handle, inode);
> > >  		if (res)
> > 
> > I'm confused by the ext4_set_context() change.
> > 
> > ext4_set_context() is only called when FS_IOC_SET_ENCRYPTION_POLICY sets an
> > encryption policy on an empty directory, *or* when a new inode (regular, dir, or
> > symlink) is created in an encrypted directory (thus inheriting encryption from
> > its parent).
> 
> I don't see the check which prevents FS_IOC_SET_ENCRYPTION_POLICY on a file?

It's in fscrypt_ioctl_set_policy().

> 
> On inode creation, encryption will always usurp S_DAX...
> 
> > 
> > So when is it reachable when IS_DAX()?  Is the issue that the DAX flag can now
> > be set on directories?  The commit message doesn't seem to be talking about
> > directories.  Is the behavior we want is that on an (empty) directory with the
> > DAX flag set, FS_IOC_SET_ENCRYPTION_POLICY should fail with EINVAL?
> 
> We would want that but AFIAK S_DAX is never set on directories.  Perhaps this
> is another place where S_DAX needs to be changed to the new inode flag?
> However, this would not be appropriate at this point in the series.  At this
> point in the series S_DAX is still set based on the mount option and I'm 99%
> sure that only happens on regular files, not directories.  So I'm confused now.

S_DAX is only set by ext4_set_inode_flags() which only sets it on regular files.

> 
> This is, AFAICS, not going to affect correctness.  It will only be confusing
> because the user will be able to set both DAX and encryption on the directory
> but files there will only see encryption being used...  :-(
> 
> Assuming you are correct about this call path only being valid on directories.
> It seems this IS_DAX() needs to be changed to check for EXT4_DAX_FL in
> "fs/ext4: Introduce DAX inode flag"?  Then at that point we can prevent DAX and
> encryption on a directory.  ...  and at this point IS_DAX() could be removed at
> this point in the series???

I haven't read the whole series, but if you are indeed trying to prevent a
directory with EXT4_DAX_FL from being encrypted, then it does look like you'd
need to check EXT4_DAX_FL, not S_DAX.

The other question is what should happen when a file is created in an encrypted
directory when the filesystem is mounted with -o dax.  Actually, I think I
missed something there.  Currently (based on reading the code) the DAX flag will
get set first, and then ext4_set_context() will see IS_DAX() && i_size == 0 and
clear the DAX flag when setting the encrypt flag.  So, the i_size == 0 check is
actually needed.  Your patch (AFAICS) just makes creating an encrypted file fail
when '-o dax'.  Is that intended?  If not, maybe you should change it to check
S_NEW instead of i_size == 0 to make it clearer?

- Eric