From: Johannes Weiner <hannes@cmpxchg.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: io-uring@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
akpm@linux-foundation.org
Subject: Re: [PATCH 02/12] mm: allow read-ahead with IOCB_NOWAIT set
Date: Tue, 26 May 2020 16:45:52 -0400 [thread overview]
Message-ID: <20200526204552.GA6781@cmpxchg.org> (raw)
In-Reply-To: <20200526195123.29053-3-axboe@kernel.dk>
On Tue, May 26, 2020 at 01:51:13PM -0600, Jens Axboe wrote:
> The read-ahead shouldn't block, so allow it to be done even if
> IOCB_NOWAIT is set in the kiocb.
>
> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Looks reasonable. Especially after patch 1 - although it seems that
even before that, IOCB_NOWAIT could have occasionally ended up in
page_cache_async_readahead(), which isn't too different from the sync
variant except for the range calculations, and may have blocked on IO
submission in the past.
next prev parent reply other threads:[~2020-05-26 20:46 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 19:51 [PATCHSET v5 0/12] Add support for async buffered reads Jens Axboe
2020-05-26 19:51 ` [PATCH 01/12] block: read-ahead submission should imply no-wait as well Jens Axboe
2020-05-26 19:51 ` [PATCH 02/12] mm: allow read-ahead with IOCB_NOWAIT set Jens Axboe
2020-05-26 20:45 ` Johannes Weiner [this message]
2020-05-26 19:51 ` [PATCH 03/12] mm: abstract out wake_page_match() from wake_page_function() Jens Axboe
2020-05-26 21:02 ` Johannes Weiner
2020-06-01 14:16 ` Matthew Wilcox
2020-05-26 19:51 ` [PATCH 04/12] mm: add support for async page locking Jens Axboe
2020-05-26 21:59 ` Johannes Weiner
2020-05-26 22:01 ` Jens Axboe
2020-05-27 16:02 ` Johannes Weiner
2020-06-01 14:26 ` Matthew Wilcox
2020-06-01 17:15 ` Jens Axboe
2020-05-26 19:51 ` [PATCH 05/12] mm: support async buffered reads in generic_file_buffered_read() Jens Axboe
2020-05-26 22:00 ` Johannes Weiner
2020-05-26 19:51 ` [PATCH 06/12] fs: add FMODE_BUF_RASYNC Jens Axboe
2020-05-26 19:51 ` [PATCH 07/12] ext4: flag as supporting buffered async reads Jens Axboe
2020-05-26 19:51 ` [PATCH 08/12] block: flag block devices as supporting IOCB_WAITQ Jens Axboe
2020-05-26 19:51 ` [PATCH 09/12] xfs: flag files as supporting buffered async reads Jens Axboe
2020-05-28 17:53 ` Darrick J. Wong
2020-05-28 19:23 ` Jens Axboe
2020-05-26 19:51 ` [PATCH 10/12] btrfs: " Jens Axboe
2020-05-26 19:57 ` Chris Mason
2020-05-26 19:51 ` [PATCH 11/12] mm: add kiocb_wait_page_queue_init() helper Jens Axboe
2020-05-26 22:01 ` Johannes Weiner
2020-05-26 19:51 ` [PATCH 12/12] io_uring: support true async buffered reads, if file provides it Jens Axboe
2020-05-28 17:02 ` [PATCHSET v5 0/12] Add support for async buffered reads Sedat Dilek
2020-05-28 17:02 ` Sedat Dilek
2020-05-28 17:06 ` Jens Axboe
2020-05-28 17:12 ` Sedat Dilek
2020-05-28 17:12 ` Sedat Dilek
2020-05-28 17:14 ` Jens Axboe
2020-05-28 18:20 ` Sedat Dilek
2020-05-28 18:20 ` Sedat Dilek
2020-05-29 10:02 ` Sedat Dilek
2020-05-29 10:02 ` Sedat Dilek
2020-05-29 11:22 ` Sedat Dilek
2020-05-29 11:22 ` Sedat Dilek
2020-05-30 13:36 ` Sedat Dilek
2020-05-30 13:36 ` Sedat Dilek
2020-05-30 18:57 ` Sedat Dilek
2020-05-30 18:57 ` Sedat Dilek
2020-05-31 1:57 ` Jens Axboe
2020-05-31 7:04 ` Sedat Dilek
2020-05-31 7:04 ` Sedat Dilek
2020-05-31 7:12 ` Sedat Dilek
2020-05-31 7:12 ` Sedat Dilek
2020-06-01 13:35 ` Sedat Dilek
2020-06-01 13:35 ` Sedat Dilek
2020-06-01 14:04 ` Jens Axboe
2020-06-01 14:13 ` Sedat Dilek
2020-06-01 14:13 ` Sedat Dilek
2020-06-01 14:14 ` Jens Axboe
2020-06-01 14:35 ` Jens Axboe
2020-06-01 14:43 ` Sedat Dilek
2020-06-01 14:43 ` Sedat Dilek
2020-06-01 14:46 ` Jens Axboe
2020-06-01 14:51 ` Sedat Dilek
2020-06-01 14:51 ` Sedat Dilek
2020-06-01 20:18 ` Sedat Dilek
2020-06-01 20:18 ` Sedat Dilek
2020-06-04 0:59 ` Andres Freund
2020-06-04 1:04 ` Jens Axboe
2020-06-04 1:30 ` Andres Freund
2020-06-05 19:56 ` Andres Freund
2020-06-05 14:42 ` Jens Axboe
2020-06-05 20:20 ` Andres Freund
2020-06-05 20:21 ` Jens Axboe
2020-06-05 20:36 ` Andres Freund
2020-06-05 20:53 ` Jens Axboe
2020-06-05 21:13 ` Jens Axboe
2020-06-05 21:21 ` Jens Axboe
2020-06-05 22:30 ` Andres Freund
2020-06-05 22:36 ` Andres Freund
2020-06-05 22:49 ` Jens Axboe
2020-06-05 22:54 ` Andres Freund
2020-06-05 22:56 ` Jens Axboe
2020-06-05 23:02 ` Andres Freund
2020-06-06 0:33 ` Sedat Dilek
2020-06-06 0:33 ` Sedat Dilek
2020-06-06 16:04 ` Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2020-05-24 19:21 [PATCHSET v4 " Jens Axboe
2020-05-24 19:21 ` [PATCH 02/12] mm: allow read-ahead with IOCB_NOWAIT set Jens Axboe
2020-05-23 18:57 [PATCHSET v2 0/12] Add support for async buffered reads Jens Axboe
2020-05-23 18:57 ` [PATCH 02/12] mm: allow read-ahead with IOCB_NOWAIT set Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526204552.GA6781@cmpxchg.org \
--to=hannes@cmpxchg.org \
--cc=akpm@linux-foundation.org \
--cc=axboe@kernel.dk \
--cc=io-uring@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.