All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Konrad Dybcio <konradybcio@gmail.com>
Cc: skrzynka@konradybcio.pl, Andy Gross <agross@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Kees Cook <keescook@chromium.org>,
	Anton Vorontsov <anton@enomsg.org>,
	Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
	Sivaprakash Murugesan <sivaprak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	??ukasz Patron <priv.luk@gmail.com>
Subject: Re: [PATCH v3 5/7] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)
Date: Tue, 23 Jun 2020 00:35:15 -0700	[thread overview]
Message-ID: <20200623073515.GA128451@builder.lan> (raw)
In-Reply-To: <20200622192558.152828-6-konradybcio@gmail.com>

On Mon 22 Jun 12:25 PDT 2020, Konrad Dybcio wrote:

> Add device tree support for the Sony Xperia XA2, XA2 Plus and
> XA2 Ultra smartphones. They are all based on the Sony Nile
> platform (sdm630) and share a lot of common code. The
> differences are really minor, so a Nile-common DTSI
> has been created to reduce clutter.
> 
> XA2 - Pioneer
> XA2 Plus - Voyager
> XA2 Ultra - Discovery
> 
> The boards currently support:
> * Screen console
> * SDHCI
> * I2C
> * pstore log dump
> * GPIO keys
> * PSCI idle states
> 
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> Tested-by: ??ukasz Patron <priv.luk@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   3 +
>  .../sdm630-sony-xperia-nile-discovery.dts     |  13 ++
>  .../qcom/sdm630-sony-xperia-nile-pioneer.dts  |  13 ++
>  .../qcom/sdm630-sony-xperia-nile-voyager.dts  |  20 +++
>  .../dts/qcom/sdm630-sony-xperia-nile.dtsi     | 136 ++++++++++++++++++
>  5 files changed, 185 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 0f2c33d611df..1cad7cb07574 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -16,6 +16,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
> new file mode 100644
> index 000000000000..8fca0b69fa01
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630-sony-xperia-nile.dtsi"
> +
> +/ {
> +	model = "Sony Xperia XA2 Ultra";
> +	compatible = "sony,discovery-row", "qcom,sdm630";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
> new file mode 100644
> index 000000000000..90dcd4ebaaed
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630-sony-xperia-nile.dtsi"
> +
> +/ {
> +	model = "Sony Xperia XA2";
> +	compatible = "sony,pioneer-row", "qcom,sdm630";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
> new file mode 100644
> index 000000000000..fae5f1bb6834
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630-sony-xperia-nile.dtsi"
> +
> +/ {
> +	model = "Sony Xperia XA2 Plus";
> +	compatible = "sony,voyager-row", "qcom,sdm630";
> +
> +	chosen {
> +		framebuffer@9d400000 {
> +			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
> +			height = <2160>;
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> new file mode 100644
> index 000000000000..9ba359c848d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630.dtsi"
> +#include "pm660.dtsi"
> +#include "pm660l.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +
> +/ {
> +	/* required for bootloader to select correct board */
> +	qcom,msm-id = <318 0>;
> +	qcom,board-id = <8 1>;
> +	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
> +
> +	/* This part enables graphical output via bootloader-enabled display */
> +	chosen {
> +		bootargs = "earlycon=tty0 console=tty0";
> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		stdout-path = "framebuffer0";
> +
> +		framebuffer0: framebuffer@9d400000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
> +			width = <1080>;
> +			height = <1920>;
> +			stride = <(1080 * 4)>;
> +			format = "a8r8g8b8";
> +			status= "okay";
> +		};
> +	};
> +
> +	gpio_keys {
> +		status = "okay";
> +		compatible = "gpio-keys";
> +		input-name = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		autorepeat;
> +
> +		camera_focus {
> +			label = "Camera Focus";
> +			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_CAMERA_FOCUS>;
> +			debounce-interval = <15>;
> +		};
> +
> +		camera_snapshot {
> +			label = "Camera Snapshot";
> +			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_CAMERA>;
> +			debounce-interval = <15>;
> +		};
> +
> +		vol_down {
> +			label = "Volume Down";
> +			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			gpio-key,wakeup;
> +			debounce-interval = <15>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ramoops@ffc00000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0xffc00000 0x0 0x100000>;
> +			record-size = <0x10000>;
> +			console-size = <0x60000>;
> +			ftrace-size = <0x10000>;
> +			pmsg-size = <0x20000>;
> +			ecc-size = <16>;
> +			status = "okay";
> +		};
> +
> +		debug_region@ffb00000 {
> +			reg = <0x00 0xffb00000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		removed_region@85800000 {
> +			reg = <0x00 0x85800000 0x00 0x3700000>;
> +			no-map;
> +		};
> +	};
> +
> +	soc {
> +		sdhci@c0c4000 {

I believe I forgot to ask you to refer to these nodes by label instead
of per their structure (i.e. &sdhc_1 { ... outside / {). As we do in
e.g. sdm845-mtp.dts.

But the patches looks good, so I applied them anyways. When it suits you
(e.g. when you're populating the i2c nodes below) please update them
accordingly.

Thanks,
Bjorn

> +			status = "okay";
> +
> +			mmc-ddr-1_8v;
> +			/* SoMC Nile platform's eMMC doesn't support HS200 mode */
> +			mmc-hs400-1_8v;
> +		};
> +
> +		i2c@c175000 {
> +			status = "okay";
> +
> +			/* Synaptics touchscreen */
> +		};
> +
> +		i2c@c176000 {
> +			status = "okay";
> +
> +			/* SMB1351 charger */
> +		};
> +
> +		serial@c1af000 {
> +			status = "okay";
> +		};
> +
> +		/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
> +
> +		i2c@c1b6000 {
> +			status = "okay";
> +
> +			/* NXP NFC */
> +		};
> +	};
> +};
> -- 
> 2.27.0
> 

  reply	other threads:[~2020-06-23  7:38 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22 19:25 [PATCH v3 0/7] Add support for Sony SDM630-based boards Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 1/7] pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility Konrad Dybcio
2020-06-23  7:26   ` Bjorn Andersson
2020-06-23  8:02     ` Konrad Dybcio
2020-06-23  8:25       ` Bjorn Andersson
2020-07-07 12:02   ` Linus Walleij
2020-06-22 19:25 ` [PATCH v3 2/7] Documentation: Document pm660(l) SPMI GPIOs compatible Konrad Dybcio
2020-06-23  7:26   ` Bjorn Andersson
2020-07-07 12:02   ` Linus Walleij
2020-06-22 19:25 ` [PATCH v3 3/7] arm64: dts: qcom: pm660(l): Add base dts files Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 4/7] arm64: dts: qcom: sdm630: Add sdm630 dts file Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 5/7] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) Konrad Dybcio
2020-06-23  7:35   ` Bjorn Andersson [this message]
2020-06-23  8:08     ` Konrad Dybcio
2020-06-23  8:24       ` Bjorn Andersson
2020-06-22 19:25 ` [PATCH v3 6/7] arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 7/7] mailbox: qcom: Add sdm660 hmss compatible Konrad Dybcio
2020-06-23  7:25   ` Bjorn Andersson
2020-06-26 15:48     ` Alexey Minnekhanov
2020-07-13 19:19       ` Bjorn Andersson
2020-07-13 18:56   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623073515.GA128451@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=anton@enomsg.org \
    --cc=ccross@android.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=keescook@chromium.org \
    --cc=konradybcio@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=priv.luk@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sivaprak@codeaurora.org \
    --cc=skrzynka@konradybcio.pl \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.