All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Stefan Berger <stefanb@linux.vnet.ibm.com>,
	Jiandi An <anjiandi@codeaurora.org>
Cc: linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-acpi@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	Stefan Berger <stefanb@linux.ibm.com>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Subject: Re: [PATCH v5 1/2] acpi: Extend TPM2 ACPI table with missing log fields
Date: Thu, 25 Jun 2020 03:00:21 +0300	[thread overview]
Message-ID: <20200625000021.GC21758@linux.intel.com> (raw)
In-Reply-To: <20200623120636.1453470-2-stefanb@linux.vnet.ibm.com>

On Tue, Jun 23, 2020 at 08:06:35AM -0400, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
> 
> Recent extensions of the TPM2 ACPI table added 3 more fields
> including 12 bytes of start method specific parameters and Log Area
> Minimum Length (u32) and Log Area Start Address (u64). So, we extend
> the existing structure with these fields to allow non-UEFI systems
> to access the TPM2's log.
> 
> The specification that has the new fields is the following:
>   TCG ACPI Specification
>   Family "1.2" and "2.0"
>   Version 1.2, Revision 8
> 
> Adapt all existing table size calculations to use
> offsetof(struct acpi_table_tpm2, start_method_specific)
> [where start_method_specific is a newly added field]
> rather than sizeof(struct acpi_table_tpm2) so that the addition
> of the new fields does not affect current systems that may not
> have them.
> 

I found at least one regression from this patch. Please remove my
reviewed-by comment form the next version.

Should have:

  Link: https://trustedcomputinggroup.org/wp-content/uploads/TCG_ACPIGeneralSpecification_v1.20_r8.pdf

Please, add this.

> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> Cc: linux-acpi@vger.kernel.org
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
>  drivers/char/tpm/tpm_crb.c | 13 ++++++++++---
>  drivers/char/tpm/tpm_tis.c |  4 +++-
>  include/acpi/actbl3.h      |  5 +++--
>  3 files changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index a9dcf31eadd2..0565aa5482f9 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -669,7 +669,9 @@ static int crb_acpi_add(struct acpi_device *device)
>  
>  	status = acpi_get_table(ACPI_SIG_TPM2, 1,
>  				(struct acpi_table_header **) &buf);
> -	if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) {
> +	if (ACPI_FAILURE(status) || buf->header.length <
> +			offsetof(struct acpi_table_tpm2,
> +				 start_method_specific)) {
>  		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
>  		return -EINVAL;
>  	}
> @@ -684,14 +686,19 @@ static int crb_acpi_add(struct acpi_device *device)
>  		return -ENOMEM;
>  
>  	if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
> -		if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {
> +		if (buf->header.length <
> +			(offsetof(struct acpi_table_tpm2,
> +				  start_method_specific) +

Should be

  offsetof(struct acpti_table_tpm2, log_area_minimum_length)

> +			 sizeof(*crb_smc))) {
>  			dev_err(dev,
>  				FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
>  				buf->header.length,
>  				ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC);
>  			return -EINVAL;
>  		}
> -		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
> +		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf,
> +			   offsetof(struct acpi_table_tpm2,
> +				    start_method_specific));
>  		priv->smc_func_id = crb_smc->smc_func_id;
>  	}
>  
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index e7df342a317d..a80f36860bac 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -111,7 +111,9 @@ static int check_acpi_tpm2(struct device *dev)
>  	 */
>  	st =
>  	    acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
> -	if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
> +	if (ACPI_FAILURE(st) || tbl->header.length <
> +			offsetof(struct acpi_table_tpm2,
> +				 start_method_specific)) {
>  		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
>  		return -EINVAL;
>  	}
> diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
> index b0b163b9efc6..8b55426bbcf6 100644
> --- a/include/acpi/actbl3.h
> +++ b/include/acpi/actbl3.h
> @@ -411,8 +411,9 @@ struct acpi_table_tpm2 {
>  	u16 reserved;
>  	u64 control_address;
>  	u32 start_method;
> -
> -	/* Platform-specific data follows */
> +	u8  start_method_specific[12];
> +	u32 log_area_minimum_length;		/* optional */
> +	u64 log_area_start_address;		/* optional */

'start_method_specific' is also optional. Please remove the optional
comments altogether as platform-specific data is by definition optional.

>  };
>  
>  /* Values for start_method above */
> -- 
> 2.26.2
> 

Please add this to the next version since we do not want to break ARM
side:

  Cc: Jiandi An <anjiandi@codeaurora.org>

/Jarkko

  reply	other threads:[~2020-06-25  0:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 12:06 [PATCH v5 0/2] tpm2: Make TPM2 logs accessible for non-UEFI firmware Stefan Berger
2020-06-23 12:06 ` [PATCH v5 1/2] acpi: Extend TPM2 ACPI table with missing log fields Stefan Berger
2020-06-25  0:00   ` Jarkko Sakkinen [this message]
2020-06-25  0:38     ` Stefan Berger
2020-06-25  2:34       ` Jarkko Sakkinen
2020-06-25  2:52         ` Jarkko Sakkinen
2020-06-25  2:54           ` Jarkko Sakkinen
2020-06-25 12:10         ` Stefan Berger
2020-06-23 12:06 ` [PATCH v5 2/2] tpm: Add support for event log pointer found in TPM2 ACPI table Stefan Berger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200625000021.GC21758@linux.intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=anjiandi@codeaurora.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=stefanb@linux.ibm.com \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.