All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Jonas Karlman <jonas@kwiboo.se>,
	Ezequiel Garcia <ezequiel@collabora.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Nicolas Dufresne <nicolas.dufresne@collabora.com>,
	Tomasz Figa <tfiga@chromium.org>,
	Alexandre Courbot <acourbot@chromium.org>
Subject: [PATCH 3/9] media: rkvdec: h264: Fix pic width and height in mbs
Date: Wed, 01 Jul 2020 21:56:21 +0000 (UTC)	[thread overview]
Message-ID: <20200701215616.30874-4-jonas@kwiboo.se> (raw)
In-Reply-To: <20200701215616.30874-1-jonas@kwiboo.se>

The width and height in mbs is currently configured based on OUTPUT buffer
resolution, this works for frame pictures but can cause issues for field
pictures or when frmsize step_width is changed to support 10-bit decoding.

When frame_mbs_only_flag is 0 the height in mbs should be height of
the field instead of height of frame.

Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
against CAPTURE buffer resolution and use these values to configure HW.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 44 +++++++++++++++++++---
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index f0cfed84d60d..c9aebeb8f9b3 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 		  LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
 	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
 		  DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
-	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
-	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
+	WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
+	WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
 	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
 		  FRAME_MBS_ONLY_FLAG);
 	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
@@ -1058,10 +1058,33 @@ static void rkvdec_h264_stop(struct rkvdec_ctx *ctx)
 	kfree(h264_ctx);
 }
 
-static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
-				     struct rkvdec_h264_run *run)
+static int validate_sps(struct rkvdec_ctx *ctx,
+			const struct v4l2_ctrl_h264_sps *sps)
+{
+	unsigned int width, height;
+
+	if (WARN_ON(!sps))
+		return -EINVAL;
+
+	width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
+	height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
+
+	if (width > ctx->decoded_fmt.fmt.pix_mp.width ||
+	    height > ctx->decoded_fmt.fmt.pix_mp.height) {
+		dev_err(ctx->dev->dev,
+			"unexpected bitstream resolution %ux%u\n",
+			width, height);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
+				    struct rkvdec_h264_run *run)
 {
 	struct v4l2_ctrl *ctrl;
+	int ret;
 
 	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
 			      V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS);
@@ -1080,6 +1103,12 @@ static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
 	run->scaling_matrix = ctrl ? ctrl->p_cur.p : NULL;
 
 	rkvdec_run_preamble(ctx, &run->base);
+
+	ret = validate_sps(ctx, run->sps);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
@@ -1088,8 +1117,13 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 	struct rkvdec_dev *rkvdec = ctx->dev;
 	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
 	struct rkvdec_h264_run run;
+	int ret;
 
-	rkvdec_h264_run_preamble(ctx, &run);
+	ret = rkvdec_h264_run_preamble(ctx, &run);
+	if (ret) {
+		rkvdec_run_postamble(ctx, &run.base);
+		return ret;
+	}
 
 	/* Build the P/B{0,1} ref lists. */
 	v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
-- 
2.17.1


  parent reply	other threads:[~2020-07-01 21:56 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01 21:56 [PATCH 0/9] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman
2020-07-01 21:56 ` [PATCH 1/9] media: rkvdec: h264: Support profile and level controls Jonas Karlman
2020-07-03  2:54   ` Ezequiel Garcia
2020-07-03  5:30     ` Jonas Karlman
2020-07-01 21:56 ` Jonas Karlman [this message]
2020-07-03  2:48   ` [PATCH 3/9] media: rkvdec: h264: Fix pic width and height in mbs Ezequiel Garcia
2020-07-03 11:28     ` Jonas Karlman
2020-07-01 21:56 ` [PATCH 2/9] media: rkvdec: h264: Fix reference frame_num wrap for second field Jonas Karlman
2020-07-03  2:55   ` Ezequiel Garcia
2020-07-03  3:01   ` Ezequiel Garcia
2020-07-01 21:56 ` [PATCH 5/9] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2020-07-01 21:56 ` [PATCH 4/9] media: rkvdec: h264: Fix bit depth wrap in pps packet Jonas Karlman
2020-07-03  2:58   ` Ezequiel Garcia
2020-07-01 21:56 ` [PATCH 6/9] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2020-07-01 21:56 ` [PATCH 7/9] media: rkvdec: h264: Use bytesperline and buffer height to calculate stride Jonas Karlman
2020-07-03  3:21   ` Ezequiel Garcia
2020-07-03 11:40     ` Jonas Karlman
2020-07-01 21:56 ` [PATCH 8/9] media: rkvdec: Add validate_fmt ops for pixelformat validation Jonas Karlman
2020-07-03  3:14   ` Ezequiel Garcia
2020-07-03  6:55     ` Jonas Karlman
2020-07-03 14:58       ` Ezequiel Garcia
2020-07-03 19:17         ` Jonas Karlman
2020-07-03 19:33           ` Ezequiel Garcia
2020-07-03 19:34           ` Tomasz Figa
2020-07-01 21:56 ` [PATCH 9/9] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2020-07-06 21:54 ` [PATCH v2 00/12] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 01/12] media: rkvdec: h264: Fix reference frame_num wrap for second field Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 03/12] media: rkvdec: h264: Validate and use pic width and height in mbs Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 02/12] media: rkvdec: Ensure decoded resolution fit coded resolution Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 06/12] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 05/12] media: rkvdec: h264: Do not override output buffer sizeimage Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 04/12] media: rkvdec: h264: Fix bit depth wrap in pps packet Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 08/12] media: rkvdec: h264: Use bytesperline and buffer height to calculate stride Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 07/12] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 10/12] media: rkvdec: Lock capture pixel format in s_ctrl and s_fmt Jonas Karlman
2020-07-08  3:16     ` Ezequiel Garcia
2020-07-08 12:42       ` Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 11/12] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 09/12] media: rkvdec: Extract rkvdec_fill_decoded_pixfmt helper method Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 12/12] media: rkvdec: h264: Support profile and level controls Jonas Karlman
2020-07-08  3:19     ` Ezequiel Garcia
2020-07-08  9:34       ` Jonas Karlman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701215616.30874-4-jonas@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=acourbot@chromium.org \
    --cc=ezequiel@collabora.com \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.