[PATCH 02/13] arm64: dts: qcom: apq8016-sbc: Fix CSI-2 lanes routing

From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	slongerbeam@gmail.com, linux-media@vger.kernel.org,
	laurent.pinchart@ideasonboard.com,
	linux-renesas-soc@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Loic Poulain <loic.poulain@linaro.org>
Subject: [PATCH 02/13] arm64: dts: qcom: apq8016-sbc: Fix CSI-2 lanes routing
Date: Fri, 17 Jul 2020 15:28:48 +0200	[thread overview]
Message-ID: <20200717132859.237120-3-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200717132859.237120-1-jacopo+renesas@jmondi.org>

The ov5640 sensor does not support lanes reconfiguration according
to version of the datasheet I have (version 2.03) and the driver
does not parse the properties to try to reconfigure them.

Fix the properties values in the camera and cci node.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
Loic, I see you added the camera nodes in
39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")

Do you have any idea how lanes could be swapped if, from my understanding,
nor the sensor nor the driver supports that ?

Thanks
  j
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8a4b790aa7ff..fe6613676e45 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -591,8 +591,8 @@ ports {
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
-				clock-lanes = <1>;
-				data-lanes = <0 2>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
 				remote-endpoint = <&ov5640_ep>;
 				status = "okay";
 			};
@@ -627,8 +627,8 @@ camera_rear@3b {

 		port {
 			ov5640_ep: endpoint {
-				clock-lanes = <1>;
-				data-lanes = <0 2>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
 				remote-endpoint = <&csiphy0_ep>;
 			};
 		};
--
2.27.0

