All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v5 07/22] drm/i915/dg1: Add and setup DPLLs for DG1
Date: Fri, 24 Jul 2020 14:39:03 -0700	[thread overview]
Message-ID: <20200724213918.27424-8-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20200724213918.27424-1-lucas.demarchi@intel.com>

From: Aditya Swarup <aditya.swarup@intel.com>

Add entries for dg1 plls and setup dg1_pll_mgr to reuse icl callbacks.
Initial setup for shared dplls DPLL0/1 for DDIA/B and DPLL2/3 for
DDIC/D. Configure dpll cfgcrx registers to drive the plls on DG1.

Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 41 +++++++++++++++++--
 1 file changed, 37 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 81ab975fe4f0..39a53aa0b233 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3512,7 +3512,17 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 
 	icl_calc_dpll_state(dev_priv, &pll_params, &port_dpll->hw_state);
 
-	if (IS_ROCKETLAKE(dev_priv)) {
+	if (IS_DG1(dev_priv)) {
+		if (port == PORT_D || port == PORT_E) {
+			dpll_mask =
+				BIT(DPLL_ID_DG1_DPLL2) |
+				BIT(DPLL_ID_DG1_DPLL3);
+		} else {
+			dpll_mask =
+				BIT(DPLL_ID_DG1_DPLL0) |
+				BIT(DPLL_ID_DG1_DPLL1);
+		}
+	} else if (IS_ROCKETLAKE(dev_priv)) {
 		dpll_mask =
 			BIT(DPLL_ID_EHL_DPLL4) |
 			BIT(DPLL_ID_ICL_DPLL1) |
@@ -3808,7 +3818,10 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	if (!(val & PLL_ENABLE))
 		goto out;
 
-	if (IS_ROCKETLAKE(dev_priv)) {
+	if (IS_DG1(dev_priv)) {
+		hw_state->cfgcr0 = intel_de_read(dev_priv, DG1_DPLL_CFGCR0(id));
+		hw_state->cfgcr1 = intel_de_read(dev_priv, DG1_DPLL_CFGCR1(id));
+	} else if (IS_ROCKETLAKE(dev_priv)) {
 		hw_state->cfgcr0 = intel_de_read(dev_priv,
 						 RKL_DPLL_CFGCR0(id));
 		hw_state->cfgcr1 = intel_de_read(dev_priv,
@@ -3866,7 +3879,10 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
 	const enum intel_dpll_id id = pll->info->id;
 	i915_reg_t cfgcr0_reg, cfgcr1_reg;
 
-	if (IS_ROCKETLAKE(dev_priv)) {
+	if (IS_DG1(dev_priv)) {
+		cfgcr0_reg = DG1_DPLL_CFGCR0(id);
+		cfgcr1_reg = DG1_DPLL_CFGCR1(id);
+	} else if (IS_ROCKETLAKE(dev_priv)) {
 		cfgcr0_reg = RKL_DPLL_CFGCR0(id);
 		cfgcr1_reg = RKL_DPLL_CFGCR1(id);
 	} else if (INTEL_GEN(dev_priv) >= 12) {
@@ -4316,6 +4332,21 @@ static const struct intel_dpll_mgr rkl_pll_mgr = {
 	.dump_hw_state = icl_dump_hw_state,
 };
 
+static const struct dpll_info dg1_plls[] = {
+	{ "DPLL 0", &combo_pll_funcs, DPLL_ID_DG1_DPLL0, 0 },
+	{ "DPLL 1", &combo_pll_funcs, DPLL_ID_DG1_DPLL1, 0 },
+	{ "DPLL 2", &combo_pll_funcs, DPLL_ID_DG1_DPLL2, 0 },
+	{ "DPLL 3", &combo_pll_funcs, DPLL_ID_DG1_DPLL3, 0 },
+	{ },
+};
+
+static const struct intel_dpll_mgr dg1_pll_mgr = {
+	.dpll_info = dg1_plls,
+	.get_dplls = icl_get_dplls,
+	.put_dplls = icl_put_dplls,
+	.dump_hw_state = icl_dump_hw_state,
+};
+
 /**
  * intel_shared_dpll_init - Initialize shared DPLLs
  * @dev: drm device
@@ -4329,7 +4360,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	const struct dpll_info *dpll_info;
 	int i;
 
-	if (IS_ROCKETLAKE(dev_priv))
+	if (IS_DG1(dev_priv))
+		dpll_mgr = &dg1_pll_mgr;
+	else if (IS_ROCKETLAKE(dev_priv))
 		dpll_mgr = &rkl_pll_mgr;
 	else if (INTEL_GEN(dev_priv) >= 12)
 		dpll_mgr = &tgl_pll_mgr;
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-07-24 21:39 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 21:38 [Intel-gfx] [PATCH v5 00/22] Introduce DG1 Lucas De Marchi
2020-07-24 21:38 ` [Intel-gfx] [PATCH v5 01/22] drm/i915/dg1: Initialize RAWCLK properly Lucas De Marchi
2020-07-28 16:35   ` Souza, Jose
2020-07-24 21:38 ` [Intel-gfx] [PATCH v5 02/22] drm/i915/dg1: Define MOCS table for DG1 Lucas De Marchi
2020-07-28 19:38   ` Matt Roper
2020-07-24 21:38 ` [Intel-gfx] [PATCH v5 03/22] drm/i915/dg1: Add DG1 power wells Lucas De Marchi
2020-07-28 20:51   ` Matt Roper
2020-08-13  7:59     ` Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 04/22] drm/i915/dg1: Increase mmio size to 4MB Lucas De Marchi
2020-07-28 21:48   ` Matt Roper
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 05/22] drm/i915/dg1: Wait for pcode/uncore handshake at startup Lucas De Marchi
2020-08-03 23:24   ` Souza, Jose
2020-08-24 19:24     ` Lucas De Marchi
2020-08-24 19:29       ` Souza, Jose
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 06/22] drm/i915/dg1: Add DPLL macros for DG1 Lucas De Marchi
2020-07-28 21:54   ` Matt Roper
2020-08-13  8:07     ` Lucas De Marchi
2020-07-24 21:39 ` Lucas De Marchi [this message]
2020-07-28 22:14   ` [Intel-gfx] [PATCH v5 07/22] drm/i915/dg1: Add and setup DPLLs " Matt Roper
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 08/22] drm/i915/dg1: Enable DPLL " Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 09/22] drm/i915/dg1: add hpd interrupt handling Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 10/22] drm/i915/dg1: invert HPD pins Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 11/22] drm/i915/dg1: gmbus pin mapping Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 12/22] drm/i915/dg1: Enable first 2 ports for DG1 Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 13/22] drm/i915/dg1: Don't program PHY_MISC for PHY-C and PHY-D Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 14/22] drm/i915/dg1: Update comp master/slave relationships for PHYs Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 15/22] drm/i915/dg1: Update voltage swing tables for DP Lucas De Marchi
2020-08-03 23:48   ` Souza, Jose
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 16/22] drm/i915/dg1: provide port/phy mapping for vbt Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 17/22] drm/i915/dg1: map/unmap pll clocks Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 18/22] drm/i915/dg1: enable PORT C/D aka D/E Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 19/22] drm/i915/dg1: Load DMC Lucas De Marchi
2020-08-03 23:27   ` Souza, Jose
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 20/22] drm/i915/dg1: Add initial DG1 workarounds Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 21/22] drm/i915/dg1: DG1 does not support DC6 Lucas De Marchi
2020-08-03 23:33   ` Souza, Jose
2020-08-24 21:26     ` Lucas De Marchi
2020-07-24 21:39 ` [Intel-gfx] [PATCH v5 22/22] drm/i915/dg1: Change DMC_DEBUG{1, 2} registers Lucas De Marchi
2020-08-03 23:31   ` Souza, Jose
2020-08-07 13:14     ` Anshuman Gupta
2020-08-07 17:26       ` Souza, Jose
2020-08-10  5:48         ` Anshuman Gupta
2020-08-13  7:56           ` Lucas De Marchi
2020-07-24 21:45 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce DG1 Patchwork
2020-07-24 21:46 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-07-24 22:08 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200724213918.27424-8-lucas.demarchi@intel.com \
    --to=lucas.demarchi@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.