From: Dmitry Osipenko <digetx@gmail.com>
To: Sebastian Reichel <sre@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
David Heidelberg <david@ixit.cz>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
"Bruce E . Robertson" <bruce.e.robertson@intel.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Jonghwa Lee <jonghwa3.lee@samsung.com>,
John Stultz <john.stultz@linaro.org>,
Vinay Simha BN <simhavcs@gmail.com>,
linux-tegra@vger.kernel.org
Subject: [PATCH v3 06/10] power: supply: smb347-charger: Support SMB345 and SMB358
Date: Fri, 14 Aug 2020 00:34:05 +0300 [thread overview]
Message-ID: <20200813213409.24222-7-digetx@gmail.com> (raw)
In-Reply-To: <20200813213409.24222-1-digetx@gmail.com>
From: David Heidelberg <david@ixit.cz>
SMB345 tested on Nexus 7 2013.
Based on:
- https://patchwork.kernel.org/patch/4922431/
- https://patchwork.ozlabs.org/patch/666877/
Signed-off-by: David Heidelberg <david@ixit.cz>
---
drivers/power/supply/Kconfig | 6 +-
drivers/power/supply/smb347-charger.c | 109 ++++++++++++++------------
2 files changed, 62 insertions(+), 53 deletions(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index e87b2434d835..7b1eda3257dd 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -639,12 +639,12 @@ config CHARGER_BQ25890
Say Y to enable support for the TI BQ25890 battery charger.
config CHARGER_SMB347
- tristate "Summit Microelectronics SMB347 Battery Charger"
+ tristate "Summit Microelectronics SMB3XX Battery Charger"
depends on I2C
select REGMAP_I2C
help
- Say Y to include support for Summit Microelectronics SMB347
- Battery Charger.
+ Say Y to include support for Summit Microelectronics SMB345,
+ SMB347 or SMB358 Battery Charger.
config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index da2c337107bf..90a87e0624a6 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -128,6 +128,7 @@
* @mains: power_supply instance for AC/DC power
* @usb: power_supply instance for USB power
* @battery: power_supply instance for battery
+ * @id: SMB charger ID
* @mains_online: is AC/DC input connected
* @usb_online: is USB input connected
* @charging_enabled: is charging enabled
@@ -140,64 +141,61 @@ struct smb347_charger {
struct power_supply *mains;
struct power_supply *usb;
struct power_supply *battery;
+ unsigned int id;
bool mains_online;
bool usb_online;
bool charging_enabled;
const struct smb347_charger_platform_data *pdata;
};
-/* Fast charge current in uA */
-static const unsigned int fcc_tbl[] = {
- 700000,
- 900000,
- 1200000,
- 1500000,
- 1800000,
- 2000000,
- 2200000,
- 2500000,
+enum smb_charger_chipid {
+ SMB345,
+ SMB347,
+ SMB358,
+ NUM_CHIP_TYPES,
};
+/* Fast charge current in uA */
+static const unsigned int fcc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+ [SMB347] = { 700000, 900000, 1200000, 1500000,
+ 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+};
/* Pre-charge current in uA */
-static const unsigned int pcc_tbl[] = {
- 100000,
- 150000,
- 200000,
- 250000,
+static const unsigned int pcc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 150000, 250000, 350000, 450000 },
+ [SMB347] = { 100000, 150000, 200000, 250000 },
+ [SMB358] = { 150000, 250000, 350000, 450000 },
};
/* Termination current in uA */
-static const unsigned int tc_tbl[] = {
- 37500,
- 50000,
- 100000,
- 150000,
- 200000,
- 250000,
- 500000,
- 600000,
+static const unsigned int tc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
+ [SMB347] = { 37500, 50000, 100000, 150000,
+ 200000, 250000, 500000, 600000 },
+ [SMB358] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
};
/* Input current limit in uA */
-static const unsigned int icl_tbl[] = {
- 300000,
- 500000,
- 700000,
- 900000,
- 1200000,
- 1500000,
- 1800000,
- 2000000,
- 2200000,
- 2500000,
+static const unsigned int icl_tbl[NUM_CHIP_TYPES][10] = {
+ [SMB345] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
+ [SMB347] = { 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
};
/* Charge current compensation in uA */
-static const unsigned int ccc_tbl[] = {
- 250000,
- 700000,
- 900000,
- 1200000,
+static const unsigned int ccc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 200000, 450000, 600000, 900000 },
+ [SMB347] = { 250000, 700000, 900000, 1200000 },
+ [SMB358] = { 200000, 450000, 600000, 900000 },
};
/* Convert register value to current using lookup table */
@@ -352,10 +350,11 @@ static int smb347_start_stop_charging(struct smb347_charger *smb)
static int smb347_set_charge_current(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret;
if (smb->pdata->max_charge_current) {
- ret = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl),
+ ret = current_to_hw(fcc_tbl[id], ARRAY_SIZE(fcc_tbl[id]),
smb->pdata->max_charge_current);
if (ret < 0)
return ret;
@@ -368,7 +367,7 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
}
if (smb->pdata->pre_charge_current) {
- ret = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl),
+ ret = current_to_hw(pcc_tbl[id], ARRAY_SIZE(pcc_tbl[id]),
smb->pdata->pre_charge_current);
if (ret < 0)
return ret;
@@ -381,7 +380,7 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
}
if (smb->pdata->termination_current) {
- ret = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl),
+ ret = current_to_hw(tc_tbl[id], ARRAY_SIZE(tc_tbl[id]),
smb->pdata->termination_current);
if (ret < 0)
return ret;
@@ -397,10 +396,11 @@ static int smb347_set_charge_current(struct smb347_charger *smb)
static int smb347_set_current_limits(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret;
if (smb->pdata->mains_current_limit) {
- ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
smb->pdata->mains_current_limit);
if (ret < 0)
return ret;
@@ -413,7 +413,7 @@ static int smb347_set_current_limits(struct smb347_charger *smb)
}
if (smb->pdata->usb_hc_current_limit) {
- ret = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl),
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
smb->pdata->usb_hc_current_limit);
if (ret < 0)
return ret;
@@ -463,6 +463,7 @@ static int smb347_set_voltage_limits(struct smb347_charger *smb)
static int smb347_set_temp_limits(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
bool enable_therm_monitor = false;
int ret = 0;
int val;
@@ -587,7 +588,7 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
}
if (smb->pdata->charge_current_compensation) {
- val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl),
+ val = current_to_hw(ccc_tbl[id], ARRAY_SIZE(ccc_tbl[id]),
smb->pdata->charge_current_compensation);
if (val < 0)
return val;
@@ -883,6 +884,7 @@ static int smb347_irq_init(struct smb347_charger *smb,
*/
static int get_const_charge_current(struct smb347_charger *smb)
{
+ unsigned int id = smb->id;
int ret, intval;
unsigned int v;
@@ -898,10 +900,12 @@ static int get_const_charge_current(struct smb347_charger *smb)
* and we can detect which table to use from bit 5.
*/
if (v & 0x20) {
- intval = hw_to_current(fcc_tbl, ARRAY_SIZE(fcc_tbl), v & 7);
+ intval = hw_to_current(fcc_tbl[id],
+ ARRAY_SIZE(fcc_tbl[id]), v & 7);
} else {
v >>= 3;
- intval = hw_to_current(pcc_tbl, ARRAY_SIZE(pcc_tbl), v & 7);
+ intval = hw_to_current(pcc_tbl[id],
+ ARRAY_SIZE(pcc_tbl[id]), v & 7);
}
return intval;
@@ -1349,6 +1353,7 @@ static int smb347_probe(struct i2c_client *client,
mutex_init(&smb->lock);
smb->dev = &client->dev;
+ smb->id = id->driver_data;
smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
if (IS_ERR(smb->regmap))
@@ -1413,13 +1418,17 @@ static int smb347_remove(struct i2c_client *client)
}
static const struct i2c_device_id smb347_id[] = {
- { "smb347", 0 },
- { }
+ { "smb345", SMB345 },
+ { "smb347", SMB347 },
+ { "smb358", SMB358 },
+ { },
};
MODULE_DEVICE_TABLE(i2c, smb347_id);
static const struct of_device_id smb3xx_of_match[] = {
+ { .compatible = "summit,smb345" },
{ .compatible = "summit,smb347" },
+ { .compatible = "summit,smb358" },
{ },
};
MODULE_DEVICE_TABLE(of, smb3xx_of_match);
--
2.27.0
next prev parent reply other threads:[~2020-08-13 21:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-13 21:33 [PATCH v3 00/10] Summit SMB3xx driver & device-tree Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 01/10] dt-bindings: battery: Add temperature properties Dmitry Osipenko
2020-08-25 2:05 ` Rob Herring
2020-08-13 21:34 ` [PATCH v3 02/10] dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx Dmitry Osipenko
2020-08-25 2:08 ` Rob Herring
2020-08-13 21:34 ` [PATCH v3 03/10] power: supply: Support battery temperature device-tree properties Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 04/10] power: supply: smb347-charger: Use resource-managed API Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 05/10] power: supply: smb347-charger: Implement device-tree support Dmitry Osipenko
2020-08-13 21:34 ` Dmitry Osipenko [this message]
2020-08-13 21:34 ` [PATCH v3 07/10] power: supply: smb347-charger: Remove virtual smb347-battery Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 08/10] power: supply: smb347-charger: Replace mutex with IRQ disable/enable Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 09/10] ARM: dts: qcom: apq8064-nexus7: Add SMB345 battery charger Dmitry Osipenko
2020-08-13 21:34 ` [PATCH v3 10/10] ARM: tegra: nexus7: Add SMB347 " Dmitry Osipenko
2020-09-17 10:24 ` Thierry Reding
2020-08-26 14:40 ` [PATCH v3 00/10] Summit SMB3xx driver & device-tree Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200813213409.24222-7-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=bruce.e.robertson@intel.com \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=john.stultz@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=jonghwa3.lee@samsung.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=simhavcs@gmail.com \
--cc=sre@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.