From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>,
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PATCH v8 33/43] qemu-img: Use child access functions
Date: Tue, 1 Sep 2020 16:34:14 +0200 [thread overview]
Message-ID: <20200901143424.884735-34-mreitz@redhat.com> (raw)
In-Reply-To: <20200901143424.884735-1-mreitz@redhat.com>
This changes iotest 204's output, because blkdebug on top of a COW node
used to make qemu-img map disregard the rest of the backing chain (the
backing chain was broken by the filter). With this patch, the
allocation in the base image is reported correctly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
qemu-img.c | 43 +++++++++++++++++++++++---------------
tests/qemu-iotests/204.out | 1 +
2 files changed, 27 insertions(+), 17 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index 5308773811..f3602dbfff 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1084,7 +1084,7 @@ static int img_commit(int argc, char **argv)
/* This is different from QMP, which by default uses the deepest file in
* the backing chain (i.e., the very base); however, the traditional
* behavior of qemu-img commit is using the immediate backing file. */
- base_bs = backing_bs(bs);
+ base_bs = bdrv_backing_chain_next(bs);
if (!base_bs) {
error_setg(&local_err, "Image does not have a backing file");
goto done;
@@ -1731,18 +1731,20 @@ static int convert_iteration_sectors(ImgConvertState *s, int64_t sector_num)
if (s->sector_next_status <= sector_num) {
uint64_t offset = (sector_num - src_cur_offset) * BDRV_SECTOR_SIZE;
int64_t count;
+ BlockDriverState *src_bs = blk_bs(s->src[src_cur]);
+ BlockDriverState *base;
+
+ if (s->target_has_backing) {
+ base = bdrv_cow_bs(bdrv_skip_filters(src_bs));
+ } else {
+ base = NULL;
+ }
do {
count = n * BDRV_SECTOR_SIZE;
- if (s->target_has_backing) {
- ret = bdrv_block_status(blk_bs(s->src[src_cur]), offset,
- count, &count, NULL, NULL);
- } else {
- ret = bdrv_block_status_above(blk_bs(s->src[src_cur]), NULL,
- offset, count, &count, NULL,
- NULL);
- }
+ ret = bdrv_block_status_above(src_bs, base, offset, count, &count,
+ NULL, NULL);
if (ret < 0) {
if (s->salvage) {
@@ -2664,7 +2666,8 @@ static int img_convert(int argc, char **argv)
* s.target_backing_sectors has to be negative, which it will
* be automatically). The backing file length is used only
* for optimizations, so such a case is not fatal. */
- s.target_backing_sectors = bdrv_nb_sectors(out_bs->backing->bs);
+ s.target_backing_sectors =
+ bdrv_nb_sectors(bdrv_backing_chain_next(out_bs));
} else {
s.target_backing_sectors = -1;
}
@@ -3034,6 +3037,7 @@ static int get_block_status(BlockDriverState *bs, int64_t offset,
depth = 0;
for (;;) {
+ bs = bdrv_skip_filters(bs);
ret = bdrv_block_status(bs, offset, bytes, &bytes, &map, &file);
if (ret < 0) {
return ret;
@@ -3042,7 +3046,7 @@ static int get_block_status(BlockDriverState *bs, int64_t offset,
if (ret & (BDRV_BLOCK_ZERO|BDRV_BLOCK_DATA)) {
break;
}
- bs = backing_bs(bs);
+ bs = bdrv_cow_bs(bs);
if (bs == NULL) {
ret = 0;
break;
@@ -3424,6 +3428,7 @@ static int img_rebase(int argc, char **argv)
uint8_t *buf_old = NULL;
uint8_t *buf_new = NULL;
BlockDriverState *bs = NULL, *prefix_chain_bs = NULL;
+ BlockDriverState *unfiltered_bs;
char *filename;
const char *fmt, *cache, *src_cache, *out_basefmt, *out_baseimg;
int c, flags, src_flags, ret;
@@ -3558,6 +3563,8 @@ static int img_rebase(int argc, char **argv)
}
bs = blk_bs(blk);
+ unfiltered_bs = bdrv_skip_filters(bs);
+
if (out_basefmt != NULL) {
if (bdrv_find_format(out_basefmt) == NULL) {
error_report("Invalid format name: '%s'", out_basefmt);
@@ -3569,7 +3576,7 @@ static int img_rebase(int argc, char **argv)
/* For safe rebasing we need to compare old and new backing file */
if (!unsafe) {
QDict *options = NULL;
- BlockDriverState *base_bs = backing_bs(bs);
+ BlockDriverState *base_bs = bdrv_cow_bs(unfiltered_bs);
if (base_bs) {
blk_old_backing = blk_new(qemu_get_aio_context(),
@@ -3710,7 +3717,7 @@ static int img_rebase(int argc, char **argv)
n = MIN(IO_BUF_SIZE, size - offset);
/* If the cluster is allocated, we don't need to take action */
- ret = bdrv_is_allocated(bs, offset, n, &n);
+ ret = bdrv_is_allocated(unfiltered_bs, offset, n, &n);
if (ret < 0) {
error_report("error while reading image metadata: %s",
strerror(-ret));
@@ -3725,8 +3732,9 @@ static int img_rebase(int argc, char **argv)
* If cluster wasn't changed since prefix_chain, we don't need
* to take action
*/
- ret = bdrv_is_allocated_above(backing_bs(bs), prefix_chain_bs,
- false, offset, n, &n);
+ ret = bdrv_is_allocated_above(bdrv_cow_bs(unfiltered_bs),
+ prefix_chain_bs, false,
+ offset, n, &n);
if (ret < 0) {
error_report("error while reading image metadata: %s",
strerror(-ret));
@@ -3804,9 +3812,10 @@ static int img_rebase(int argc, char **argv)
* doesn't change when we switch the backing file.
*/
if (out_baseimg && *out_baseimg) {
- ret = bdrv_change_backing_file(bs, out_baseimg, out_basefmt, true);
+ ret = bdrv_change_backing_file(unfiltered_bs, out_baseimg, out_basefmt,
+ true);
} else {
- ret = bdrv_change_backing_file(bs, NULL, NULL, false);
+ ret = bdrv_change_backing_file(unfiltered_bs, NULL, NULL, false);
}
if (ret == -ENOSPC) {
diff --git a/tests/qemu-iotests/204.out b/tests/qemu-iotests/204.out
index 457f72df8f..4d903d20ea 100644
--- a/tests/qemu-iotests/204.out
+++ b/tests/qemu-iotests/204.out
@@ -59,5 +59,6 @@ Offset Length File
0x900000 0x2400000 TEST_DIR/t.IMGFMT
0x3c00000 0x1100000 TEST_DIR/t.IMGFMT
0x6a00000 0x400000 TEST_DIR/t.IMGFMT
+0x6e00000 0x1200000 TEST_DIR/t.IMGFMT.base
No errors were found on the image.
*** done
--
2.26.2
next prev parent reply other threads:[~2020-09-01 15:01 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 14:33 [PATCH v8 00/43] block: Deal with filters Max Reitz
2020-09-01 14:33 ` [PATCH v8 01/43] block: Add child access functions Max Reitz
2020-09-01 14:33 ` [PATCH v8 02/43] block: Add chain helper functions Max Reitz
2020-09-01 14:33 ` [PATCH v8 03/43] block: bdrv_cow_child() for bdrv_has_zero_init() Max Reitz
2020-09-01 14:33 ` [PATCH v8 04/43] block: bdrv_set_backing_hd() is about bs->backing Max Reitz
2020-09-01 14:33 ` [PATCH v8 05/43] block: Include filters when freezing backing chain Max Reitz
2020-09-01 14:33 ` [PATCH v8 06/43] block: Drop bdrv_is_encrypted() Max Reitz
2020-09-01 14:33 ` [PATCH v8 07/43] block: Add bdrv_supports_compressed_writes() Max Reitz
2020-09-01 14:33 ` [PATCH v8 08/43] throttle: Support compressed writes Max Reitz
2020-09-01 14:33 ` [PATCH v8 09/43] copy-on-read: " Max Reitz
2020-09-01 14:33 ` [PATCH v8 10/43] block: Use bdrv_filter_(bs|child) where obvious Max Reitz
2020-09-01 14:33 ` [PATCH v8 11/43] block: Use CAFs in block status functions Max Reitz
2020-09-01 14:33 ` [PATCH v8 12/43] stream: Deal with filters Max Reitz
2020-09-01 14:33 ` [PATCH v8 13/43] block: Use CAFs when working with backing chains Max Reitz
2020-09-01 14:33 ` [PATCH v8 14/43] block: Use bdrv_cow_child() in bdrv_co_truncate() Max Reitz
2020-09-01 14:33 ` [PATCH v8 15/43] block: Re-evaluate backing file handling in reopen Max Reitz
2020-09-01 14:33 ` [PATCH v8 16/43] block: Flush all children in generic code Max Reitz
2020-09-01 14:33 ` [PATCH v8 17/43] vmdk: Drop vmdk_co_flush() Max Reitz
2020-09-01 14:33 ` [PATCH v8 18/43] block: Iterate over children in refresh_limits Max Reitz
2020-09-01 14:34 ` [PATCH v8 19/43] block: Use CAFs in bdrv_refresh_filename() Max Reitz
2020-09-01 14:34 ` [PATCH v8 20/43] block: Use CAF in bdrv_co_rw_vmstate() Max Reitz
2020-09-01 14:34 ` [PATCH v8 21/43] block/snapshot: Fix fallback Max Reitz
2020-09-01 14:34 ` [PATCH v8 22/43] block: Use CAFs for debug breakpoints Max Reitz
2020-09-01 14:34 ` [PATCH v8 23/43] block: Improve get_allocated_file_size's default Max Reitz
2020-09-01 14:34 ` [PATCH v8 24/43] block/null: Implement bdrv_get_allocated_file_size Max Reitz
2020-09-01 14:34 ` [PATCH v8 25/43] blockdev: Use CAF in external_snapshot_prepare() Max Reitz
2020-09-01 14:34 ` [PATCH v8 26/43] block: Report data child for query-blockstats Max Reitz
2020-09-01 14:34 ` [PATCH v8 27/43] block: Use child access functions for QAPI queries Max Reitz
2020-09-01 14:34 ` [PATCH v8 28/43] block-copy: Use CAF to find sync=top base Max Reitz
2020-09-01 14:34 ` [PATCH v8 29/43] mirror: Deal with filters Max Reitz
2020-09-02 8:53 ` Kevin Wolf
2020-09-02 10:19 ` Max Reitz
2020-09-01 14:34 ` [PATCH v8 30/43] backup: " Max Reitz
2020-09-01 14:34 ` [PATCH v8 31/43] commit: " Max Reitz
2020-09-01 14:34 ` [PATCH v8 32/43] nbd: Use CAF when looking for dirty bitmap Max Reitz
2020-09-01 14:34 ` Max Reitz [this message]
2020-09-01 14:34 ` [PATCH v8 34/43] block: Drop backing_bs() Max Reitz
2020-09-01 14:34 ` [PATCH v8 35/43] blockdev: Fix active commit choice Max Reitz
2020-09-02 9:10 ` Kevin Wolf
2020-09-01 14:34 ` [PATCH v8 36/43] block: Inline bdrv_co_block_status_from_*() Max Reitz
2020-09-01 14:34 ` [PATCH v8 37/43] block: Leave BDS.backing_{file,format} constant Max Reitz
2020-09-01 14:34 ` [PATCH v8 38/43] iotests: Test that qcow2's data-file is flushed Max Reitz
2020-09-01 14:34 ` [PATCH v8 39/43] iotests: Let complete_and_wait() work with commit Max Reitz
2020-09-01 14:34 ` [PATCH v8 40/43] iotests: Add filter commit test cases Max Reitz
2020-09-01 14:34 ` [PATCH v8 41/43] iotests: Add filter mirror " Max Reitz
2020-09-01 14:34 ` [PATCH v8 42/43] iotests: Add test for commit in sub directory Max Reitz
2020-09-01 14:34 ` [PATCH v8 43/43] iotests: Test committing to overridden backing Max Reitz
2020-09-02 10:23 ` [PATCH v8 00/43] block: Deal with filters Kevin Wolf
2020-09-02 12:26 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200901143424.884735-34-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=andrey.shinkevich@virtuozzo.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.