From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-iio@vger.kernel.org
Subject: [PATCH v2 9/9] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
Date: Thu, 3 Sep 2020 16:21:09 +0300 [thread overview]
Message-ID: <20200903132109.1914011-10-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20200903132109.1914011-1-dmitry.baryshkov@linaro.org>
Port thermal zones definitions from msm-4.19 tree. Enable and add
channel configuration to PMIC's ADC-TM definitions. Declare thermal
zones and respective trip points.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 217 ++++++++++++++++++++++++
1 file changed, 217 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 6894f8490dae..4db5c1e4269e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -24,6 +24,104 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ xo-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -358,6 +456,125 @@ &cdsp {
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm1@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc {
+ camera-flash-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm2@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>,
+ <&pm8150_adc ADC5_AMUX_THM1_100K_PU>,
+ <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ io-channel-names = "xo-therm", "skin-therm", "pa-therm1";
+
+ xo-therm@0 {
+ reg = <0>;
+ qcom,adc-channel = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-therm@1 {
+ reg = <1>;
+ qcom,adc-channel = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm1@2 {
+ reg = <2>;
+ qcom,adc-channel = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ io-channel-names = "conn-therm";
+
+ conn-therm@0 {
+ reg = <0>;
+ qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>,
+ <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>,
+ <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ io-channel-names = "camera-flash-therm", "skin-msm-therm", "pa-therm2";
+
+ camera-flash-therm@0 {
+ reg = <0>;
+ qcom,adc-channel = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-msm-therm@1 {
+ reg = <1>;
+ qcom,adc-channel = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm2@2 {
+ reg = <2>;
+ qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
&qupv3_id_1 {
status = "okay";
};
--
2.28.0
prev parent reply other threads:[~2020-09-03 14:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 13:21 [PATCH v2 0/0] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-09-03 13:21 ` [PATCH v2 1/9] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-09-03 16:34 ` Rob Herring
2020-09-06 14:14 ` Jonathan Cameron
2020-09-03 13:21 ` [PATCH v2 2/9] fixp-arith: add a linear interpolation function Dmitry Baryshkov
2020-09-03 13:21 ` [PATCH v2 3/9] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-09-06 14:18 ` Jonathan Cameron
2020-09-03 13:21 ` [PATCH v2 4/9] iio: adc: qcom-vadc-common: use fixp_linear_interpolate Dmitry Baryshkov
2020-09-03 19:38 ` Andy Shevchenko
2020-09-06 14:23 ` Jonathan Cameron
2020-09-03 13:21 ` [PATCH v2 5/9] iio: adc: qcom-spmi-adc5: fix driver name Dmitry Baryshkov
2020-09-04 11:14 ` Manivannan Sadhasivam
2020-09-06 14:24 ` Jonathan Cameron
2020-09-03 13:21 ` [PATCH v2 6/9] iio: adc: qcom-spmi-adc5: use of_device_get_match_data Dmitry Baryshkov
2020-09-04 11:12 ` Manivannan Sadhasivam
2020-09-03 13:21 ` [PATCH v2 7/9] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-09-06 14:45 ` Jonathan Cameron
2020-09-03 13:21 ` [PATCH v2 8/9] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part Dmitry Baryshkov
2020-09-03 13:21 ` Dmitry Baryshkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200903132109.1914011-10-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.