All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Felix Fietkau <nbd@nbd.name>,
	Johannes Berg <johannes.berg@intel.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.19 20/38] mac80211: do not allow bigger VHT MPDUs than the hardware supports
Date: Mon,  5 Oct 2020 17:26:37 +0200	[thread overview]
Message-ID: <20201005142109.648723146@linuxfoundation.org> (raw)
In-Reply-To: <20201005142108.650363140@linuxfoundation.org>

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 3bd5c7a28a7c3aba07a2d300d43f8e988809e147 ]

Limit maximum VHT MPDU size by local capability.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/vht.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 259325cbcc314..4d154efb80c88 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -170,10 +170,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
 	/* take some capabilities as-is */
 	cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info);
 	vht_cap->cap = cap_info;
-	vht_cap->cap &= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 |
-			IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
-			IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
-			IEEE80211_VHT_CAP_RXLDPC |
+	vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC |
 			IEEE80211_VHT_CAP_VHT_TXOP_PS |
 			IEEE80211_VHT_CAP_HTC_VHT |
 			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK |
@@ -182,6 +179,9 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
 			IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
 			IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
 
+	vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK,
+			      own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK);
+
 	/* and some based on our own capabilities */
 	switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
-- 
2.25.1




  parent reply	other threads:[~2020-10-05 15:27 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-05 15:26 [PATCH 4.19 00/38] 4.19.150-rc1 review Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 01/38] mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 02/38] USB: gadget: f_ncm: Fix NDP16 datagram validation Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 03/38] gpio: mockup: fix resource leak in error path Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 04/38] gpio: tc35894: fix up tc35894 interrupt configuration Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 05/38] clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 06/38] vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 07/38] vsock/virtio: stop workers during the .remove() Greg Kroah-Hartman
2020-10-06 19:34   ` Pavel Machek
2020-10-07  7:13     ` Stefano Garzarella
2020-10-05 15:26 ` [PATCH 4.19 08/38] vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock() Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 09/38] net: virtio_vsock: Enhance connection semantics Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 10/38] Input: i8042 - add nopnp quirk for Acer Aspire 5 A515 Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 11/38] ftrace: Move RCU is watching check after recursion check Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 12/38] drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 13/38] drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devices Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 14/38] drm/sun4i: mixer: Extend regmap max_register Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 15/38] net: dec: de2104x: Increase receive ring size for Tulip Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 16/38] rndis_host: increase sleep time in the query-response loop Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 17/38] nvme-core: get/put ctrl and transport module in nvme_dev_open/release() Greg Kroah-Hartman
2020-10-05 20:58   ` Pavel Machek
2020-10-05 15:26 ` [PATCH 4.19 18/38] drivers/net/wan/lapbether: Make skb->protocol consistent with the header Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 19/38] drivers/net/wan/hdlc: Set skb->protocol before transmitting Greg Kroah-Hartman
2020-10-05 15:26 ` Greg Kroah-Hartman [this message]
2020-10-05 15:26 ` [PATCH 4.19 21/38] spi: fsl-espi: Only process interrupts for expected events Greg Kroah-Hartman
2020-10-06 19:36   ` Pavel Machek
2020-10-11 19:47     ` Chris Packham
2020-10-11 22:03       ` Pavel Machek
2020-10-05 15:26 ` [PATCH 4.19 22/38] nvme-fc: fail new connections to a deleted host or remote port Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 23/38] gpio: sprd: Clear interrupt when setting the type as edge Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 24/38] pinctrl: mvebu: Fix i2c sda definition for 98DX3236 Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 25/38] nfs: Fix security label length not being reset Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 26/38] clk: samsung: exynos4: mark chipid clock as CLK_IGNORE_UNUSED Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 27/38] iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate() Greg Kroah-Hartman
2020-10-07  9:47   ` Pavel Machek
2020-10-13  8:54     ` Marek Szyprowski
2020-10-13 14:14       ` Pavel Machek
2020-10-05 15:26 ` [PATCH 4.19 28/38] i2c: cpm: Fix i2c_ram structure Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 29/38] Input: trackpoint - enable Synaptics trackpoints Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 30/38] random32: Restore __latent_entropy attribute on net_rand_state Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 31/38] mm: replace memmap_context by meminit_context Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 32/38] mm: dont rely on system state to detect hot-plug operations Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 33/38] net/packet: fix overflow in tpacket_rcv Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 34/38] epoll: do not insert into poll queues until all sanity checks are done Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 35/38] epoll: replace ->visited/visited_list with generation count Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 36/38] epoll: EPOLL_CTL_ADD: close the race in decision to take fast path Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 37/38] ep_create_wakeup_source(): dentry name can change under you Greg Kroah-Hartman
2020-10-05 15:26 ` [PATCH 4.19 38/38] netfilter: ctnetlink: add a range check for l3/l4 protonum Greg Kroah-Hartman
2020-10-05 20:59   ` Pavel Machek
2020-10-05 17:50 ` [PATCH 4.19 00/38] 4.19.150-rc1 review Jon Hunter
2020-10-06  0:23 ` Shuah Khan
2020-10-06  8:52 ` Naresh Kamboju
2020-10-06 18:16 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201005142109.648723146@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=johannes.berg@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nbd@nbd.name \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.