[PATCH 05/11] arm64: dts: qcom: msm8992: Add support for SDHCI2

From: Konrad Dybcio <konradybcio@gmail.com>
To: konradybcio@gmail.com
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 05/11] arm64: dts: qcom: msm8992: Add support for SDHCI2
Date: Mon,  5 Oct 2020 17:03:05 +0200	[thread overview]
Message-ID: <20201005150313.149754-6-konradybcio@gmail.com> (raw)
In-Reply-To: <20201005150313.149754-1-konradybcio@gmail.com>

This will let us use SD cards on our devices.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8992.dtsi | 59 +++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 8626b3a50eda..6242c56a2bfa 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -269,6 +269,29 @@ sdhc_1: sdhci@f9824900 {
 			status = "disabled";
 		};
 
+		sdhc_2: sdhci@f98a4900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				<&gcc GCC_SDCC2_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			cd-gpios = <&tlmm 100 0>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
@@ -573,6 +596,42 @@ i2c13_sleep: i2c13-sleep {
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			sdc2_clk_on: sdc2-clk-on {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc2_clk_off: sdc2-clk-off {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
 		};
 	};
 
-- 
2.28.0

