All of lore.kernel.org
 help / color / mirror / Atom feed
From: Douglas Gilbert <dgilbert@interlog.com>
To: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: martin.petersen@oracle.com, axboe@kernel.dk, bvanassche@acm.org,
	bostroesser@gmail.com
Subject: [PATCH v2 4/4] scatterlist: add sgl_memset()
Date: Sun, 18 Oct 2020 13:13:36 -0400	[thread overview]
Message-ID: <20201018171336.63839-5-dgilbert@interlog.com> (raw)
In-Reply-To: <20201018171336.63839-1-dgilbert@interlog.com>

The existing sg_zero_buffer() function is a bit restrictive.
For example protection information (PI) blocks are usually
initialized to 0xff bytes. As its name suggests sgl_memset()
is modelled on memset(). One difference is the type of the
val argument which is u8 rather than int. Plus it returns
the number of bytes (over)written.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
---
 include/linux/scatterlist.h |  3 +++
 lib/scatterlist.c           | 54 ++++++++++++++++++++++++++++++++++---
 2 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index ae260dc5fedb..a40012c8a4e6 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -329,6 +329,9 @@ bool sgl_compare_sgl(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_sk
 		     struct scatterlist *y_sgl, unsigned int y_nents, off_t y_skip,
 		     size_t n_bytes);
 
+size_t sgl_memset(struct scatterlist *sgl, unsigned int nents, off_t skip,
+		  u8 val, size_t n_bytes);
+
 /*
  * Maximum number of entries that will be allocated in one piece, if
  * a list larger than this is required then chaining will be utilized.
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index d910776a4c96..a704039ab54d 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -985,7 +985,8 @@ EXPORT_SYMBOL(sg_zero_buffer);
  * @s_skip:		 Number of bytes to skip in source before starting
  * @n_bytes:		 The (maximum) number of bytes to copy
  *
- * Returns the number of copied bytes.
+ * Returns:
+ *   The number of copied bytes.
  *
  * Notes:
  *   Destination arguments appear before the source arguments, as with memcpy().
@@ -1058,8 +1059,9 @@ EXPORT_SYMBOL(sgl_copy_sgl);
  * @y_skip:		 Number of bytes to skip in y (right) before starting
  * @n_bytes:		 The (maximum) number of bytes to compare
  *
- * Returns true if x and y compare equal before x, y or n_bytes is exhausted.
- * Otherwise on a miscompare, returns false (and stops comparing).
+ * Returns:
+ *   true if x and y compare equal before x, y or n_bytes is exhausted.
+ *   Otherwise on a miscompare, returns false (and stops comparing).
  *
  * Notes:
  *   x and y are symmetrical: they can be swapped and the result is the same.
@@ -1108,3 +1110,49 @@ bool sgl_compare_sgl(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_sk
 	return equ;
 }
 EXPORT_SYMBOL(sgl_compare_sgl);
+
+/**
+ * sgl_memset - set byte 'val' up to n_bytes times on SG list
+ * @sgl:		 The SG list
+ * @nents:		 Number of SG entries in sgl
+ * @skip:		 Number of bytes to skip before starting
+ * @val:		 byte value to write to sgl
+ * @n_bytes:		 The (maximum) number of bytes to modify
+ *
+ * Returns:
+ *   The number of bytes written.
+ *
+ * Notes:
+ *   Stops writing if either sgl or n_bytes is exhausted. If n_bytes is
+ *   set SIZE_MAX then val will be written to each byte until the end
+ *   of sgl.
+ *
+ *   The notes in sgl_copy_sgl() about large sgl_s _applies here as well.
+ *
+ **/
+size_t sgl_memset(struct scatterlist *sgl, unsigned int nents, off_t skip,
+		  u8 val, size_t n_bytes)
+{
+	size_t offset = 0;
+	size_t len;
+	struct sg_mapping_iter miter;
+
+	if (n_bytes == 0)
+		return 0;
+	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC | SG_MITER_TO_SG);
+	if (!sg_miter_skip(&miter, skip))
+		goto fini;
+
+	while ((offset < n_bytes) && sg_miter_next(&miter)) {
+		len = min(miter.length, n_bytes - offset);
+		memset(miter.addr, val, len);
+		offset += len;
+		miter.consumed = len;
+		sg_miter_stop(&miter);
+	}
+fini:
+	sg_miter_stop(&miter);
+	return offset;
+}
+EXPORT_SYMBOL(sgl_memset);
+
-- 
2.25.1


  parent reply	other threads:[~2020-10-18 17:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-18 17:13 [PATCH v2 0/4] scatterlist: add new capabilities Douglas Gilbert
2020-10-18 17:13 ` [PATCH v2 1/4] sgl_alloc_order: remove 4 GiB limit, sgl_free() warning Douglas Gilbert
2020-10-18 17:13 ` [PATCH v2 2/4] scatterlist: add sgl_copy_sgl() function Douglas Gilbert
2020-10-18 17:13 ` [PATCH v2 3/4] scatterlist: add sgl_compare_sgl() function Douglas Gilbert
2020-10-18 17:13 ` Douglas Gilbert [this message]
2020-10-19 11:18   ` [PATCH v2 4/4] scatterlist: add sgl_memset() Bodo Stroesser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201018171336.63839-5-dgilbert@interlog.com \
    --to=dgilbert@interlog.com \
    --cc=axboe@kernel.dk \
    --cc=bostroesser@gmail.com \
    --cc=bvanassche@acm.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.