All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	<Steen.Hegelund@microchip.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: [PATCH v5 4/6] irqchip: ocelot: Add support for Luton platforms
Date: Wed, 25 Nov 2020 11:32:04 +0100	[thread overview]
Message-ID: <20201125103206.136498-5-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20201125103206.136498-1-gregory.clement@bootlin.com>

This patch extends irqchip driver for oceleot to be used with an other
vcoreiii base platform: Luton.

For this platform there is a few differences:
   - the interrupt must be enabled for the parent controller
   - there is no trigger register needed to be managed

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/irqchip/irq-mscc-ocelot.c | 38 +++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mscc-ocelot.c b/drivers/irqchip/irq-mscc-ocelot.c
index 6d4029a2ded0..496f955b8fc4 100644
--- a/drivers/irqchip/irq-mscc-ocelot.c
+++ b/drivers/irqchip/irq-mscc-ocelot.c
@@ -16,6 +16,7 @@
 #define ICPU_CFG_INTR_INTR_TRIGGER(_p, x)   ((_p)->reg_off_trigger + 0x4 * (x))
 
 #define FLAGS_HAS_TRIGGER	BIT(0)
+#define FLAGS_NEED_INIT_ENABLE	BIT(1)
 
 struct chip_props {
 	u8 flags;
@@ -40,6 +41,17 @@ static struct chip_props ocelot_props = {
 	.n_irq			= 24,
 };
 
+static struct chip_props luton_props = {
+	.flags			= FLAGS_NEED_INIT_ENABLE,
+	.reg_off_sticky		= 0,
+	.reg_off_ena		= 0x4,
+	.reg_off_ena_clr	= 0x8,
+	.reg_off_ena_set	= 0xc,
+	.reg_off_ident		= 0x18,
+	.reg_off_ena_irq0	= 0x14,
+	.n_irq			= 28,
+};
+
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
@@ -115,17 +127,27 @@ static int __init vcoreiii_irq_init(struct device_node *node,
 		goto err_gc_free;
 	}
 
-	gc->chip_types[0].regs.ack = p->reg_off_sticky;
-	gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
-	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
-	if (p->flags & FLAGS_HAS_TRIGGER)
+	gc->chip_types[0].regs.ack = p->reg_off_sticky;
+	if (p->flags & FLAGS_HAS_TRIGGER) {
+		gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 		gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+	} else {
+		gc->chip_types[0].regs.enable = p->reg_off_ena_set;
+		gc->chip_types[0].regs.disable = p->reg_off_ena_clr;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+		gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+	}
 
 	/* Mask and ack all interrupts */
 	irq_reg_writel(gc, 0, p->reg_off_ena);
 	irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);
 
+	/* Overall init */
+	if (p->flags & FLAGS_NEED_INIT_ENABLE)
+		irq_reg_writel(gc, BIT(0), p->reg_off_ena_irq0);
+
 	domain->host_data = p;
 	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
 					 domain);
@@ -148,3 +170,11 @@ static int __init ocelot_irq_init(struct device_node *node,
 }
 
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
+
+static int __init luton_irq_init(struct device_node *node,
+				 struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &luton_props);
+}
+
+IRQCHIP_DECLARE(luton_icpu, "mscc,luton-icpu-intr", luton_irq_init);
-- 
2.29.2


  parent reply	other threads:[~2020-11-25 10:32 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25 10:32 [PATCH v5 0/6] Extend irqchip ocelot driver to support other SoCs Gregory CLEMENT
2020-11-25 10:32 ` [PATCH v5 1/6] dt-bindings: interrupt-controller: convert icpu intr bindings to json-schema Gregory CLEMENT
2020-11-30 22:52   ` Rob Herring
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] " irqchip-bot for Gregory CLEMENT
2020-11-25 10:32 ` [PATCH v5 2/6] dt-bindings: interrupt-controller: Add binding for few Microsemi interrupt controllers Gregory CLEMENT
2020-11-30 22:52   ` Rob Herring
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] " irqchip-bot for Gregory CLEMENT
2020-11-25 10:32 ` [PATCH v5 3/6] irqchip: ocelot: prepare to support more SoC Gregory CLEMENT
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] irqchip/ocelot: " irqchip-bot for Gregory CLEMENT
2020-11-25 10:32 ` Gregory CLEMENT [this message]
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] irqchip/ocelot: Add support for Luton platforms irqchip-bot for Gregory CLEMENT
2020-11-25 10:32 ` [PATCH v5 5/6] irqchip: ocelot: Add support for Serval platforms Gregory CLEMENT
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] irqchip/ocelot: " irqchip-bot for Gregory CLEMENT
2020-11-25 10:32 ` [PATCH v5 6/6] irqchip: ocelot: Add support for Jaguar2 platforms Gregory CLEMENT
2020-12-11 14:58   ` [irqchip: irq/irqchip-next] irqchip/ocelot: " irqchip-bot for Gregory CLEMENT
2020-12-11 15:01 ` [PATCH v5 0/6] Extend irqchip ocelot driver to support other SoCs Marc Zyngier
2020-12-11 15:01   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201125103206.136498-5-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=Steen.Hegelund@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=lars.povlsen@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.