From: Santosh Sivaraj <santosh@fossix.org>
To: Linux NVDIMM <linux-nvdimm@lists.01.org>,
Vishal Verma <vishal.l.verma@intel.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Vaibhav Jain <vaibhav@linux.ibm.com>,
Shivaprasad G Bhat <sbhat@linux.ibm.com>,
Harish Sriram <harish@linux.ibm.com>,
Dan Williams <dan.j.williams@intel.com>
Cc: Santosh Sivaraj <santosh@fossix.org>
Subject: [RFC v5 0/7] PMEM device emulation without nfit depenency
Date: Mon, 14 Dec 2020 16:08:52 +0530 [thread overview]
Message-ID: <20201214103859.2409175-1-santosh@fossix.org> (raw)
The current test module cannot be used for testing platforms (make check)
that do not have support for NFIT. In order to get the ndctl tests working,
we need a module which can emulate NVDIMM devices without relying on
ACPI/NFIT.
The emulated PMEM device is made part of the PAPR family.
Corresponding changes for ndctl is also required, to add attributes needed
for the test, which will be sent as a reply to this patch.
The following is the test result, run on a x86 guest:
PASS: libndctl
PASS: dsm-fail
PASS: dpa-alloc
PASS: parent-uuid
PASS: multi-pmem
PASS: create.sh
FAIL: clear.sh
FAIL: pmem-errors.sh
FAIL: daxdev-errors.sh
PASS: multi-dax.sh
PASS: btt-check.sh
FAIL: label-compat.sh
PASS: blk-exhaust.sh
PASS: sector-mode.sh
FAIL: inject-error.sh
SKIP: btt-errors.sh
PASS: hugetlb
PASS: btt-pad-compat.sh
SKIP: firmware-update.sh
FAIL: ack-shutdown-count-set
PASS: rescan-partitions.sh
FAIL: inject-smart.sh
FAIL: monitor.sh
PASS: max_available_extent_ns.sh
FAIL: pfn-meta-errors.sh
PASS: track-uuid.sh
============================================================================
Testsuite summary for ndctl 70.10.g7ecd11c
============================================================================
# TOTAL: 26
# PASS: 15
# SKIP: 2
# XFAIL: 0
# FAIL: 9
# XPASS: 0
# ERROR: 0
The following is the test result from a PowerPC 64 guest.
PASS: libndctl
PASS: dsm-fail
PASS: dpa-alloc
PASS: parent-uuid
PASS: multi-pmem
PASS: create.sh
FAIL: clear.sh
FAIL: pmem-errors.sh
FAIL: daxdev-errors.sh
PASS: multi-dax.sh
PASS: btt-check.sh
FAIL: label-compat.sh
PASS: blk-exhaust.sh
PASS: sector-mode.sh
FAIL: inject-error.sh
SKIP: btt-errors.sh
SKIP: hugetlb
PASS: btt-pad-compat.sh
SKIP: firmware-update.sh
FAIL: ack-shutdown-count-set
PASS: rescan-partitions.sh
FAIL: inject-smart.sh
FAIL: monitor.sh
PASS: max_available_extent_ns.sh
FAIL: pfn-meta-errors.sh
PASS: track-uuid.sh
============================================================================
Testsuite summary for ndctl 70.git94a00679
============================================================================
# TOTAL: 26
# PASS: 14
# SKIP: 3
# XFAIL: 0
# FAIL: 9
# XPASS: 0
# ERROR: 0
Error injection tests and SMART are not yet implemented.
Changes from V4:
- Split the driver patches into smaller chunks for ease of review
- [ndctl] Adding dimm attributes for nfit and papr, make it into one function [Dan]
- [ndctl] If nfit modules are missing, check for acpi support before failing, slightly
different approach than what Dan commented.
Santosh Sivaraj (7):
testing/nvdimm: Add test module for non-nfit platforms
ndtest: Add compatability string to treat it as PAPR family
ndtest: Add dimms to the two buses
ndtest: Add dimm attributes
ndtest: Add regions and mappings to the test buses
ndtest: Add nvdimm control functions
ndtest: Add papr health related flags
tools/testing/nvdimm/config_check.c | 3 +-
tools/testing/nvdimm/test/Kbuild | 6 +-
tools/testing/nvdimm/test/ndtest.c | 1138 +++++++++++++++++++++++++++
tools/testing/nvdimm/test/ndtest.h | 109 +++
4 files changed, 1254 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/nvdimm/test/ndtest.c
create mode 100644 tools/testing/nvdimm/test/ndtest.h
--
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
next reply other threads:[~2020-12-14 10:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 10:38 Santosh Sivaraj [this message]
2020-12-14 10:38 ` [RFC v5 1/7] testing/nvdimm: Add test module for non-nfit platforms Santosh Sivaraj
2020-12-16 5:05 ` Dan Williams
2020-12-17 7:16 ` Santosh Sivaraj
2021-01-28 5:41 ` Dan Williams
2020-12-14 10:38 ` [RFC v5 2/7] ndtest: Add compatability string to treat it as PAPR family Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 3/7] ndtest: Add dimms to the two buses Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 4/7] ndtest: Add dimm attributes Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 5/7] ndtest: Add regions and mappings to the test buses Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 6/7] ndtest: Add nvdimm control functions Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 7/7] ndtest: Add papr health related flags Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 1/5] libndctl: test enablement for non-nfit devices Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 2/5] test: Don't skip tests if nfit modules are missing Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 3/5] papr: Add support to parse save_fail flag for dimm Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 4/5] test/libndctl: skip SMART tests on non-nfit devices Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 5/5] Use page size as alignment value Santosh Sivaraj
2020-12-15 23:21 ` [RFC v5 0/7] PMEM device emulation without nfit depenency Dan Williams
2020-12-17 7:23 ` Santosh Sivaraj
2021-01-28 8:12 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201214103859.2409175-1-santosh@fossix.org \
--to=santosh@fossix.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=dan.j.williams@intel.com \
--cc=harish@linux.ibm.com \
--cc=linux-nvdimm@lists.01.org \
--cc=sbhat@linux.ibm.com \
--cc=vaibhav@linux.ibm.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.