From: Claudio Fontana <cfontana@suse.de>
To: "Alex Bennée" <alex.bennee@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>
Cc: Laurent Vivier <lvivier@redhat.com>,
Thomas Huth <thuth@redhat.com>,
qemu-devel@nongnu.org, Roman Bolshakov <r.bolshakov@yadro.com>,
Alistair Francis <alistair.francis@wdc.com>,
Claudio Fontana <cfontana@suse.de>
Subject: [PATCH v14 12/22] physmem: make watchpoint checking code TCG-only
Date: Thu, 28 Jan 2021 10:28:04 +0100 [thread overview]
Message-ID: <20210128092814.8676-13-cfontana@suse.de> (raw)
In-Reply-To: <20210128092814.8676-1-cfontana@suse.de>
cpu_check_watchpoint, watchpoint_address_matches are TCG-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
---
softmmu/physmem.c | 141 +++++++++++++++++++++++-----------------------
1 file changed, 72 insertions(+), 69 deletions(-)
diff --git a/softmmu/physmem.c b/softmmu/physmem.c
index cdcd197656..ef94e32583 100644
--- a/softmmu/physmem.c
+++ b/softmmu/physmem.c
@@ -840,6 +840,7 @@ void cpu_watchpoint_remove_all(CPUState *cpu, int mask)
}
}
+#ifdef CONFIG_TCG
/* Return true if this watchpoint address matches the specified
* access (ie the address range covered by the watchpoint overlaps
* partially or completely with the address range covered by the
@@ -873,6 +874,77 @@ int cpu_watchpoint_address_matches(CPUState *cpu, vaddr addr, vaddr len)
return ret;
}
+/* Generate a debug exception if a watchpoint has been hit. */
+void cpu_check_watchpoint(CPUState *cpu, vaddr addr, vaddr len,
+ MemTxAttrs attrs, int flags, uintptr_t ra)
+{
+ CPUClass *cc = CPU_GET_CLASS(cpu);
+ CPUWatchpoint *wp;
+
+ assert(tcg_enabled());
+ if (cpu->watchpoint_hit) {
+ /*
+ * We re-entered the check after replacing the TB.
+ * Now raise the debug interrupt so that it will
+ * trigger after the current instruction.
+ */
+ qemu_mutex_lock_iothread();
+ cpu_interrupt(cpu, CPU_INTERRUPT_DEBUG);
+ qemu_mutex_unlock_iothread();
+ return;
+ }
+
+ addr = cc->adjust_watchpoint_address(cpu, addr, len);
+ QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
+ if (watchpoint_address_matches(wp, addr, len)
+ && (wp->flags & flags)) {
+ if (replay_running_debug()) {
+ /*
+ * Don't process the watchpoints when we are
+ * in a reverse debugging operation.
+ */
+ replay_breakpoint();
+ return;
+ }
+ if (flags == BP_MEM_READ) {
+ wp->flags |= BP_WATCHPOINT_HIT_READ;
+ } else {
+ wp->flags |= BP_WATCHPOINT_HIT_WRITE;
+ }
+ wp->hitaddr = MAX(addr, wp->vaddr);
+ wp->hitattrs = attrs;
+ if (!cpu->watchpoint_hit) {
+ if (wp->flags & BP_CPU &&
+ !cc->debug_check_watchpoint(cpu, wp)) {
+ wp->flags &= ~BP_WATCHPOINT_HIT;
+ continue;
+ }
+ cpu->watchpoint_hit = wp;
+
+ mmap_lock();
+ tb_check_watchpoint(cpu, ra);
+ if (wp->flags & BP_STOP_BEFORE_ACCESS) {
+ cpu->exception_index = EXCP_DEBUG;
+ mmap_unlock();
+ cpu_loop_exit_restore(cpu, ra);
+ } else {
+ /* Force execution of one insn next time. */
+ cpu->cflags_next_tb = 1 | curr_cflags();
+ mmap_unlock();
+ if (ra) {
+ cpu_restore_state(cpu, ra, true);
+ }
+ cpu_loop_exit_noexc(cpu);
+ }
+ }
+ } else {
+ wp->flags &= ~BP_WATCHPOINT_HIT;
+ }
+ }
+}
+
+#endif /* CONFIG_TCG */
+
/* Called from RCU critical section */
static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
{
@@ -2355,75 +2427,6 @@ ram_addr_t qemu_ram_addr_from_host(void *ptr)
return block->offset + offset;
}
-/* Generate a debug exception if a watchpoint has been hit. */
-void cpu_check_watchpoint(CPUState *cpu, vaddr addr, vaddr len,
- MemTxAttrs attrs, int flags, uintptr_t ra)
-{
- CPUClass *cc = CPU_GET_CLASS(cpu);
- CPUWatchpoint *wp;
-
- assert(tcg_enabled());
- if (cpu->watchpoint_hit) {
- /*
- * We re-entered the check after replacing the TB.
- * Now raise the debug interrupt so that it will
- * trigger after the current instruction.
- */
- qemu_mutex_lock_iothread();
- cpu_interrupt(cpu, CPU_INTERRUPT_DEBUG);
- qemu_mutex_unlock_iothread();
- return;
- }
-
- addr = cc->adjust_watchpoint_address(cpu, addr, len);
- QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
- if (watchpoint_address_matches(wp, addr, len)
- && (wp->flags & flags)) {
- if (replay_running_debug()) {
- /*
- * Don't process the watchpoints when we are
- * in a reverse debugging operation.
- */
- replay_breakpoint();
- return;
- }
- if (flags == BP_MEM_READ) {
- wp->flags |= BP_WATCHPOINT_HIT_READ;
- } else {
- wp->flags |= BP_WATCHPOINT_HIT_WRITE;
- }
- wp->hitaddr = MAX(addr, wp->vaddr);
- wp->hitattrs = attrs;
- if (!cpu->watchpoint_hit) {
- if (wp->flags & BP_CPU &&
- !cc->debug_check_watchpoint(cpu, wp)) {
- wp->flags &= ~BP_WATCHPOINT_HIT;
- continue;
- }
- cpu->watchpoint_hit = wp;
-
- mmap_lock();
- tb_check_watchpoint(cpu, ra);
- if (wp->flags & BP_STOP_BEFORE_ACCESS) {
- cpu->exception_index = EXCP_DEBUG;
- mmap_unlock();
- cpu_loop_exit_restore(cpu, ra);
- } else {
- /* Force execution of one insn next time. */
- cpu->cflags_next_tb = 1 | curr_cflags();
- mmap_unlock();
- if (ra) {
- cpu_restore_state(cpu, ra, true);
- }
- cpu_loop_exit_noexc(cpu);
- }
- }
- } else {
- wp->flags &= ~BP_WATCHPOINT_HIT;
- }
- }
-}
-
static MemTxResult flatview_read(FlatView *fv, hwaddr addr,
MemTxAttrs attrs, void *buf, hwaddr len);
static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs,
--
2.26.2
next prev parent reply other threads:[~2021-01-28 9:40 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-28 9:27 [PATCH v14 00/22] i386 cleanup PART 2 Claudio Fontana
2021-01-28 9:27 ` [PATCH v14 01/22] cpu: Introduce TCGCpuOperations struct Claudio Fontana
2021-01-28 9:27 ` [PATCH v14 02/22] target/riscv: remove CONFIG_TCG, as it is always TCG Claudio Fontana
2021-01-28 18:34 ` Alex Bennée
2021-01-28 9:27 ` [PATCH v14 03/22] accel/tcg: split TCG-only code from cpu_exec_realizefn Claudio Fontana
2021-01-28 9:27 ` [PATCH v14 04/22] cpu: Move synchronize_from_tb() to tcg_ops Claudio Fontana
2021-01-28 18:58 ` Alex Bennée
2021-01-28 23:01 ` Richard Henderson
2021-01-28 9:27 ` [PATCH v14 05/22] cpu: Move cpu_exec_* " Claudio Fontana
2021-01-28 9:27 ` [PATCH v14 06/22] cpu: Move tlb_fill " Claudio Fontana
2021-01-28 9:27 ` [PATCH v14 07/22] cpu: Move debug_excp_handler " Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 08/22] target/arm: do not use cc->do_interrupt for KVM directly Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 09/22] cpu: move cc->do_interrupt to tcg_ops Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 10/22] cpu: move cc->transaction_failed " Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 11/22] cpu: move do_unaligned_access " Claudio Fontana
2021-01-28 9:28 ` Claudio Fontana [this message]
2021-01-28 19:09 ` [PATCH v14 12/22] physmem: make watchpoint checking code TCG-only Alex Bennée
2021-01-28 9:28 ` [PATCH v14 13/22] cpu: move adjust_watchpoint_address to tcg_ops Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 14/22] cpu: move debug_check_watchpoint " Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 15/22] cpu: tcg_ops: move to tcg-cpu-ops.h, keep a pointer in CPUClass Claudio Fontana
2021-01-29 0:31 ` Richard Henderson
2021-01-29 9:00 ` Claudio Fontana
2021-01-29 19:19 ` Richard Henderson
2021-01-29 19:36 ` Eduardo Habkost
2021-01-30 9:40 ` Claudio Fontana
2021-02-02 10:01 ` Claudio Fontana
2021-02-02 10:27 ` Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 16/22] accel: extend AccelState and AccelClass to user-mode Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 17/22] accel: replace struct CpusAccel with AccelOpsClass Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 18/22] accel: introduce AccelCPUClass extending CPUClass Claudio Fontana
2021-01-28 13:03 ` Philippe Mathieu-Daudé
2021-01-28 13:22 ` Claudio Fontana
2021-01-28 16:08 ` Alex Bennée
2021-01-28 16:29 ` Philippe Mathieu-Daudé
2021-01-29 0:13 ` Richard Henderson
2021-01-30 10:53 ` Claudio Fontana
2021-01-30 19:01 ` Richard Henderson
2021-02-01 9:15 ` Alex Bennée
2021-02-01 9:22 ` Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 19/22] i386: split cpu accelerators from cpu.c, using AccelCPUClass Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 20/22] cpu: call AccelCPUClass::cpu_realizefn in cpu_exec_realizefn Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 21/22] hw/core/cpu: call qemu_init_vcpu in cpu_common_realizefn Claudio Fontana
2021-01-28 9:28 ` [PATCH v14 22/22] accel: introduce new accessor functions Claudio Fontana
2021-01-29 0:22 ` [PATCH v14 00/22] i386 cleanup PART 2 Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210128092814.8676-13-cfontana@suse.de \
--to=cfontana@suse.de \
--cc=alex.bennee@linaro.org \
--cc=alistair.francis@wdc.com \
--cc=ehabkost@redhat.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=r.bolshakov@yadro.com \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.