From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 00/24] hw/arm: New board model mps3-an524
Date: Fri, 5 Feb 2021 16:59:55 +0000 [thread overview]
Message-ID: <20210205170019.25319-1-peter.maydell@linaro.org> (raw)
This patchseries implements a new board model in the mps2/mps3 family,
based on Application Note AN524:
https://developer.arm.com/documentation/dai0524/latest/
Like the other MPS models, this board is an FPGA image; the AN524
image is based on the SSE-200, like the mps2-an521, but it is
for the MPS3 board rather than the MPS2+. The major differences
are QSPI flash and USB (which we don't model), and support for
2GB of RAM (which we do). Since the MPS3 is very similar to the
MPS2, I've implemented mps3-an524 as a subclass of TYPE_MPS2TZ_MACHINE,
sharing most of the code with mps2-an505 and mps2-an521.
The motivation for this model is two-fold:
* Linaro's Zephyr team would like it, so they can test their
code targeting the MPS3 on QEMU
* It's a useful stepping-stone towards a future MPS family model
which uses the SSE-300 and Cortex-M55. All the "make various bits
of mps2-tz.c be driven by per-board data structures rather than
hardcoding them" changes will be needed for that future board model.
This way they can be code-reviewed now, rather than making the
future patchseries even bigger (it will be pretty large even so,
because of all the "implement SSE-300 model" patches).
This model can run the parts of the AN524 selftest image that
would be expected to work, i.e. the ones that don't rely on things
QEMU doesn't implement. (The selftest is part of the AN524
download so it's behind a EULA click-through and we can't put it
into an acceptance test. We might be able to get something
based on Zephyr or Arm TFM.)
thanks
-- PMM
Peter Maydell (24):
hw/arm/mps2-tz: Make SYSCLK frequency board-specific
hw/misc/mps2-scc: Support configurable number of OSCCLK values
hw/arm/mps2-tz: Correct the OSCCLK settings for mps2-an505 and
mps2-an511
hw/arm/mps2-tz: Make the OSCCLK settings be configurable per-board
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board
type
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device
interrupts
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst | 24 +-
include/hw/arm/armsse.h | 4 +-
include/hw/misc/armsse-cpuid.h | 2 +-
include/hw/misc/armsse-mhu.h | 2 +-
include/hw/misc/iotkit-secctl.h | 2 +-
include/hw/misc/iotkit-sysctl.h | 2 +-
include/hw/misc/iotkit-sysinfo.h | 2 +-
include/hw/misc/mps2-fpgaio.h | 8 +-
include/hw/misc/mps2-scc.h | 10 +-
hw/arm/mps2-tz.c | 629 +++++++++++++++++++++++++------
hw/arm/mps2.c | 5 +
hw/misc/armsse-cpuid.c | 2 +-
hw/misc/armsse-mhu.c | 2 +-
hw/misc/iotkit-sysctl.c | 2 +-
hw/misc/iotkit-sysinfo.c | 2 +-
hw/misc/mps2-fpgaio.c | 43 ++-
hw/misc/mps2-scc.c | 93 ++++-
17 files changed, 677 insertions(+), 157 deletions(-)
--
2.20.1
next reply other threads:[~2021-02-05 17:50 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 16:59 Peter Maydell [this message]
2021-02-05 16:59 ` [PATCH 01/24] hw/arm/mps2-tz: Make SYSCLK frequency board-specific Peter Maydell
2021-02-05 18:13 ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 02/24] hw/misc/mps2-scc: Support configurable number of OSCCLK values Peter Maydell
2021-02-12 18:11 ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 03/24] hw/arm/mps2-tz: Correct the OSCCLK settings for mps2-an505 and mps2-an511 Peter Maydell
2021-02-12 18:12 ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 04/24] hw/arm/mps2-tz: Make the OSCCLK settings be configurable per-board Peter Maydell
2021-02-12 18:12 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 05/24] hw/misc/mps2-fpgaio: Make number of LEDs configurable by board Peter Maydell
2021-02-12 18:19 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 06/24] hw/misc/mps2-fpgaio: Support SWITCH register Peter Maydell
2021-02-12 13:45 ` Peter Maydell
2021-02-12 13:51 ` Philippe Mathieu-Daudé
2021-02-12 14:03 ` Peter Maydell
2021-02-12 18:23 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 07/24] hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board Peter Maydell
2021-02-12 13:51 ` Peter Maydell
2021-02-12 18:24 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 08/24] hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type Peter Maydell
2021-02-12 18:25 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 09/24] hw/arm/mps2-tz: Make number of IRQs board-specific Peter Maydell
2021-02-12 18:26 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 10/24] hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 Peter Maydell
2021-02-05 17:00 ` [PATCH 11/24] hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI Peter Maydell
2021-02-05 17:00 ` [PATCH 12/24] hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts Peter Maydell
2021-02-05 17:00 ` [PATCH 13/24] hw/arm/mps2-tz: Move device IRQ info to data structures Peter Maydell
2021-02-05 17:00 ` [PATCH 14/24] hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs Peter Maydell
2021-02-05 17:00 ` [PATCH 15/24] hw/arm/mps2-tz: Allow boards to have different PPCInfo data Peter Maydell
2021-02-05 17:00 ` [PATCH 16/24] hw/arm/mps2-tz: Make RAM arrangement board-specific Peter Maydell
2021-02-05 17:00 ` [PATCH 17/24] hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data Peter Maydell
2021-02-05 17:00 ` [PATCH 18/24] hw/arm/mps2-tz: Support ROMs as well as RAMs Peter Maydell
2021-02-05 17:00 ` [PATCH 19/24] hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo Peter Maydell
2021-02-12 18:30 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 20/24] hw/arm/mps2-tz: Add new mps3-an524 board Peter Maydell
2021-02-12 11:19 ` Peter Maydell
2021-02-12 14:51 ` Peter Maydell
2021-02-05 17:00 ` [PATCH 21/24] hw/arm/mps2-tz: Stub out USB controller for mps3-an524 Peter Maydell
2021-02-12 18:34 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 22/24] hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524 Peter Maydell
2021-02-12 18:35 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 23/24] docs/system/arm/mps2.rst: Document the new mps3-an524 board Peter Maydell
2021-02-12 18:36 ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 24/24] hw/arm/mps2: Update old infocenter.arm.com URLs Peter Maydell
2021-02-12 18:37 ` Philippe Mathieu-Daudé
2021-02-05 18:05 ` [PATCH 00/24] hw/arm: New board model mps3-an524 Philippe Mathieu-Daudé
2021-02-05 19:20 ` Peter Maydell
2021-02-05 19:31 ` Philippe Mathieu-Daudé
2021-02-05 19:34 ` Peter Maydell
2021-02-12 18:38 ` Philippe Mathieu-Daudé
2021-02-05 18:27 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205170019.25319-1-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.