From: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
To: git@vger.kernel.org
Cc: "Junio C Hamano" <gitster@pobox.com>,
"Johannes Sixt" <j6t@kdbg.org>, "Jeff King" <peff@peff.net>,
"Jonathan Nieder" <jrnieder@gmail.com>,
"Philippe Blain" <levraiphilippeblain@gmail.com>,
"Adam Spiers" <git@adamspiers.org>,
"Eric Sunshine" <sunshine@sunshineco.com>,
"Chris Torek" <chris.torek@gmail.com>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
Subject: [PATCH v3 00/35] 20210215154427.32693-1-avarab@gmail.com
Date: Wed, 24 Feb 2021 20:50:54 +0100 [thread overview]
Message-ID: <20210224195129.4004-1-avarab@gmail.com> (raw)
In-Reply-To: <20210215154427.32693-1-avarab@gmail.com>
Addresses feedback on v2. Since Junio & Johannes expressed a desire to
keep the existing test scheme in t4018/* it's still there, but it's
also possible to add *.sh tests in that directory to use the more
familiar test framework used elsewhere in the test suite.
The tests added here make use of it to e.g. supply custom -U<n>
arguments, set config before the tests etc.
I also improved that existing test support so you can have N tests in
one file with (mostly) the existing test syntax. See the "userdiff
tests: add a test with multiple tests in a LANG file" patch.
Range-diff below.
Ævar Arnfjörð Bjarmason (35):
userdiff: refactor away the parse_bool() function
userdiff style: re-order drivers in alphabetical order
userdiff style: declare patterns with consistent style
userdiff style: normalize pascal regex declaration
userdiff: add and use for_each_userdiff_driver()
userdiff tests: explicitly test "default" pattern
userdiff tests: list builtin drivers via test-tool
userdiff: remove support for "broken" tests
blame tests: don't rely on t/t4018/ directory
blame tests: simplify userdiff driver test
userdiff tests: match full hunk headers
userdiff tests: change setup loop to individual test setup
userdiff tests: factor out test_diff_funcname() logic
userdiff tests: add alternative hunk header test infrastructure
userdiff tests: add a test with multiple tests in a LANG file
userdiff tests: do config teardown in test_diff_funcname()
userdiff tests: move custom patterns into one test file
userdiff tests: remove hack for "RIGHT" token
userdiff tests: do not do compile tests on "custom" pattern
userdiff tests: assert that new built-in drivers have tests
userdiff tests + docs: document & test "diff.<driver>.x?funcname"
gitattributes doc: reword discussion of built-in userdiff patterns
userdiff tests: move perl tests to perl.sh
userdiff tests: move away from "RIGHT" in perl.sh
gitattributes doc: document multi-line userdiff patterns
userdiff tests: switch to -U0 by default
userdiff tests: remove "funcname" from custom3 test
userdiff tests: assert empty hunk header context on -U<large>
userdiff tests: test for a bug in 1dbf0c0ad6c
userdiff golang: simplify and correct matching regex
userdiff golang: don't over-match intented constructs
userdiff golang: add a rule to match "package"
userdiff golang: match multi-line "const" and "import"
userdiff tests: add basic test for ada
userdiff tests: add basic test for ruby
Documentation/config/diff.txt | 11 ++
Documentation/gitattributes.txt | 46 ++++-
Makefile | 1 +
t/annotate-tests.sh | 34 ++--
t/helper/test-tool.c | 1 +
t/helper/test-tool.h | 1 +
t/helper/test-userdiff.c | 31 ++++
t/t4018-diff-funcname.sh | 180 +++++++++++++-------
t/t4018/README | 69 ++++++--
t/t4018/ada.sh | 37 ++++
t/t4018/bash-arithmetic-function | 1 +
t/t4018/bash-bashism-style-compact | 1 +
t/t4018/bash-bashism-style-function | 1 +
t/t4018/bash-bashism-style-whitespace | 1 +
t/t4018/bash-conditional-function | 1 +
t/t4018/bash-missing-parentheses | 1 +
t/t4018/bash-mixed-style-compact | 1 +
t/t4018/bash-mixed-style-function | 1 +
t/t4018/bash-nested-functions | 1 +
t/t4018/bash-other-characters | 1 +
t/t4018/bash-posix-style-compact | 1 +
t/t4018/bash-posix-style-function | 1 +
t/t4018/bash-posix-style-whitespace | 1 +
t/t4018/bash-subshell-function | 1 +
t/t4018/bash-trailing-comment | 1 +
t/t4018/cpp-c++-function | 1 +
t/t4018/cpp-class-constructor | 1 +
t/t4018/cpp-class-constructor-mem-init | 1 +
t/t4018/cpp-class-definition | 1 +
t/t4018/cpp-class-definition-derived | 1 +
t/t4018/cpp-class-destructor | 1 +
t/t4018/cpp-function-returning-global-type | 1 +
t/t4018/cpp-function-returning-nested | 1 +
t/t4018/cpp-function-returning-pointer | 1 +
t/t4018/cpp-function-returning-reference | 1 +
t/t4018/cpp-gnu-style-function | 1 +
t/t4018/cpp-namespace-definition | 1 +
t/t4018/cpp-operator-definition | 1 +
t/t4018/cpp-skip-access-specifiers | 1 +
t/t4018/cpp-skip-comment-block | 1 +
t/t4018/cpp-skip-labels | 1 +
t/t4018/cpp-struct-definition | 1 +
t/t4018/cpp-struct-single-line | 1 +
t/t4018/cpp-template-function-definition | 1 +
t/t4018/cpp-union-definition | 1 +
t/t4018/cpp-void-c-function | 1 +
t/t4018/css-attribute-value-selector | 1 +
t/t4018/css-block-level-@-statements | 1 +
t/t4018/css-brace-in-col-1 | 1 +
t/t4018/css-class-selector | 1 +
t/t4018/css-colon-eol | 1 +
t/t4018/css-colon-selector | 1 +
t/t4018/css-common | 1 +
t/t4018/css-id-selector | 1 +
t/t4018/css-long-selector-list | 1 +
t/t4018/css-prop-sans-indent | 1 +
t/t4018/css-root-selector | 1 +
t/t4018/css-short-selector-list | 1 +
t/t4018/css-trailing-space | 1 +
t/t4018/custom.sh | 183 ++++++++++++++++++++
t/t4018/custom1-pattern | 17 --
t/t4018/custom2-match-to-end-of-line | 8 -
t/t4018/custom3-alternation-in-pattern | 17 --
t/t4018/dts-labels | 1 +
t/t4018/dts-node-unitless | 1 +
t/t4018/dts-nodes | 1 +
t/t4018/dts-nodes-boolean-prop | 1 +
t/t4018/dts-nodes-comment1 | 1 +
t/t4018/dts-nodes-comment2 | 1 +
t/t4018/dts-nodes-multiline-prop | 1 +
t/t4018/dts-reference | 1 +
t/t4018/dts-root | 1 +
t/t4018/dts-root-comment | 1 +
t/t4018/elixir-do-not-pick-end | 1 +
t/t4018/elixir-ex-unit-test | 1 +
t/t4018/elixir-function | 1 +
t/t4018/elixir-macro | 1 +
t/t4018/elixir-module | 1 +
t/t4018/elixir-module-func | 1 +
t/t4018/elixir-nested-module | 1 +
t/t4018/elixir-private-function | 1 +
t/t4018/elixir-protocol | 1 +
t/t4018/elixir-protocol-implementation | 1 +
t/t4018/fortran-block-data | 1 +
t/t4018/fortran-comment | 1 +
t/t4018/fortran-comment-keyword | 1 +
t/t4018/fortran-comment-legacy | 1 +
t/t4018/fortran-comment-legacy-star | 1 +
t/t4018/fortran-external-function | 1 +
t/t4018/fortran-external-subroutine | 1 +
t/t4018/fortran-module | 1 +
t/t4018/fortran-module-procedure | 1 +
t/t4018/fortran-program | 1 +
t/t4018/fountain-scene | 1 +
t/t4018/golang | 148 ++++++++++++++++
t/t4018/golang-complex-function | 8 -
t/t4018/golang-func | 4 -
t/t4018/golang-interface | 4 -
t/t4018/golang-long-func | 5 -
t/t4018/golang-struct | 4 -
t/t4018/java-class-member-function | 1 +
t/t4018/markdown-heading-indented | 1 +
t/t4018/markdown-heading-non-headings | 1 +
t/t4018/matlab-class-definition | 1 +
t/t4018/matlab-function | 1 +
t/t4018/matlab-octave-section-1 | 1 +
t/t4018/matlab-octave-section-2 | 1 +
t/t4018/matlab-section | 1 +
t/t4018/perl-skip-end-of-heredoc | 8 -
t/t4018/perl-skip-forward-decl | 10 --
t/t4018/perl-skip-sub-in-pod | 18 --
t/t4018/perl-sub-definition | 4 -
t/t4018/perl-sub-definition-kr-brace | 4 -
t/t4018/perl.sh | 93 +++++++++++
t/t4018/php-abstract-class | 1 +
t/t4018/php-abstract-method | 1 +
t/t4018/php-class | 1 +
t/t4018/php-final-class | 1 +
t/t4018/php-final-method | 1 +
t/t4018/php-function | 1 +
t/t4018/php-interface | 1 +
t/t4018/php-method | 1 +
t/t4018/php-trait | 1 +
t/t4018/python-async-def | 1 +
t/t4018/python-class | 1 +
t/t4018/python-def | 1 +
t/t4018/python-indented-async-def | 1 +
t/t4018/python-indented-class | 1 +
t/t4018/python-indented-def | 1 +
t/t4018/ruby.sh | 58 +++++++
t/t4018/rust-fn | 1 +
t/t4018/rust-impl | 1 +
t/t4018/rust-macro-rules | 1 +
t/t4018/rust-struct | 1 +
t/t4018/rust-trait | 1 +
userdiff.c | 186 +++++++++++++--------
userdiff.h | 15 ++
137 files changed, 1036 insertions(+), 277 deletions(-)
create mode 100644 t/helper/test-userdiff.c
create mode 100755 t/t4018/ada.sh
create mode 100755 t/t4018/custom.sh
delete mode 100644 t/t4018/custom1-pattern
delete mode 100644 t/t4018/custom2-match-to-end-of-line
delete mode 100644 t/t4018/custom3-alternation-in-pattern
create mode 100644 t/t4018/golang
delete mode 100644 t/t4018/golang-complex-function
delete mode 100644 t/t4018/golang-func
delete mode 100644 t/t4018/golang-interface
delete mode 100644 t/t4018/golang-long-func
delete mode 100644 t/t4018/golang-struct
delete mode 100644 t/t4018/perl-skip-end-of-heredoc
delete mode 100644 t/t4018/perl-skip-forward-decl
delete mode 100644 t/t4018/perl-skip-sub-in-pod
delete mode 100644 t/t4018/perl-sub-definition
delete mode 100644 t/t4018/perl-sub-definition-kr-brace
create mode 100755 t/t4018/perl.sh
create mode 100755 t/t4018/ruby.sh
Range-diff:
1: 305fc646d0d = 1: 0be132b05e2 userdiff: refactor away the parse_bool() function
2: 989438c46ae = 2: d1e00a739ac userdiff style: re-order drivers in alphabetical order
3: 4c48e5532ce = 3: b99bd158d45 userdiff style: declare patterns with consistent style
4: f41fa5b316f = 4: 9ce6d47021c userdiff style: normalize pascal regex declaration
5: 0875d5205c1 = 5: 369fbdcee83 userdiff: add and use for_each_userdiff_driver()
6: 638247d04d5 = 6: 70d62a97211 userdiff tests: explicitly test "default" pattern
7: 219043a4881 ! 7: 792421a2f8b userdiff tests: list builtin drivers via test-tool
@@ t/helper/test-userdiff.c (new)
+static int driver_cb(struct userdiff_driver *driver,
+ enum userdiff_driver_type type, void *priv)
+{
-+ puts(driver->name);
++ if (driver->funcname.pattern)
++ puts(driver->name);
+ return 0;
+}
+
@@ t/t4018-diff-funcname.sh: test_description='Test custom diff function name patte
. ./test-lib.sh
test_expect_success 'setup' '
-+ builtin_drivers=$(test-tool userdiff list-builtin-drivers) &&
-+ test -n "$builtin_drivers" &&
++ # Make sure additions to builtin_drivers are sorted
++ test_when_finished "rm builtin-drivers.sorted" &&
++ test-tool userdiff list-builtin-drivers >builtin-drivers &&
++ test_file_not_empty builtin-drivers &&
++ sort <builtin-drivers >builtin-drivers.sorted &&
++ test_cmp builtin-drivers.sorted builtin-drivers &&
+
# a non-trivial custom pattern
git config diff.custom1.funcname "!static
@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
- rust
- tex
- default
-+ $builtin_drivers
++ $(cat builtin-drivers)
custom1
custom2
custom3
8: eb66160aac7 = 8: 9081e2a152e userdiff: remove support for "broken" tests
9: c6c54039e27 < -: ----------- userdiff tests: match full hunk headers
10: 1c6ddf96f61 ! 9: d3652f95d5e blame tests: don't rely on t/t4018/ directory
@@ Commit message
with userdiff driver, 2020-11-01) so that the blame tests don't rely
on stealing the contents of "t/t4018/fortran-external-function".
- I'm about to refactor that directory to delete that file, just moving
- the relevant test file here inline is the easiest solution, and I
- think also the most readable.
+ I'm about to change that file in a subsequent commit. Just moving the
+ relevant test file here inline is the easiest solution, and I think
+ also the most readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
11: 8a883d87990 ! 10: 35d12779ea1 blame tests: simplify userdiff driver test
@@ Commit message
added in 999cfc4f45 (test-lib functions: add --author support to
test_commit, 2021-01-12).
- We also did not need the full fortran-external-function content, let's
+ We also did not need the full fortran-external-function content. Let's
cut it down to just the important parts, and further modify it to
demonstrate that the fortran-specific userdiff function is in effect
- by adding "WRONG" lines surrounding the "RIGHT" one.
+ by adding "DO NOT MATCH ..." and "AS THE ..." lines surrounding the
+ "RIGHT" one. This is to check that we're using the userdiff "fortran"
+ driver, as opposed to the default driver.
The test also left behind a .gitattributes files, let's clean it up
with "test_when_finished".
@@ t/annotate-tests.sh: test_expect_success 'blame -L ^:RE (absolute: end-of-file)'
- cat >$fortran_file <<-\EOF &&
+test_expect_success 'blame -L :funcname with userdiff driver' '
+ cat >file.template <<-\EOF &&
-+ def WRONG begin end
++ DO NOT MATCH THIS LINE
function RIGHT(a, b) result(c)
-+ int WRONG(void) {}
++ AS THE DEFAULT DRIVER WOULD
integer, intent(in) :: ChangeMe
- integer, intent(in) :: b
@@ t/annotate-tests.sh: test_expect_success 'blame -L ^:RE (absolute: end-of-file)'
+ echo "$fortran_file diff=fortran" >.gitattributes &&
+
+ test_commit --author "A <A@test.git>" \
-+ "add" $fortran_file \
++ "add" "$fortran_file" \
+ "$(cat file.template)" &&
+ test_commit --author "B <B@test.git>" \
-+ "change" $fortran_file \
++ "change" "$fortran_file" \
+ "$(cat file.template | sed -e s/ChangeMe/IWasChanged/)" &&
-+ check_count -f $fortran_file -L:RIGHT A 3 B 1
++ check_count -f "$fortran_file" -L:RIGHT A 3 B 1
'
test_expect_success 'setup incremental' '
12: e56a7a6b5f4 < -: ----------- userdiff tests: rewrite hunk header test infrastructure
-: ----------- > 11: 4bd8a0daa25 userdiff tests: match full hunk headers
-: ----------- > 12: d2d74476f2a userdiff tests: change setup loop to individual test setup
21: 9a18506aff8 ! 13: 8db95a69924 userdiff tests: factor out test_diff_funcname() logic
@@ Commit message
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
## t/t4018-diff-funcname.sh ##
-@@ t/t4018-diff-funcname.sh: test_expect_success 'last regexp must not be negated' '
- test_i18ngrep ": Last expression must not be negated:" msg
+@@ t/t4018-diff-funcname.sh: test_expect_success 'setup hunk header tests' '
+ git -C t4018 add .
'
+do_change_me () {
@@ t/t4018-diff-funcname.sh: test_expect_success 'last regexp must not be negated'
+ sed -n -e "s/^.*@@$//p" -e "s/^.*@@ //p" <$file
+}
+
- test_diff_funcname () {
- desc=$1
- cat <&8 >arg.header &&
-@@ t/t4018-diff-funcname.sh: test_diff_funcname () {
- cp arg.test "$what" &&
- cp arg.header expected &&
- git add "$what" &&
-- sed -e "s/ChangeMe/IWasChanged/" <"$what" >tmp &&
-- mv tmp "$what"
-+ do_change_me "$what"
- ' &&
+ # check each individual file
+ for i in $(git -C t4018 ls-files)
+ do
+@@ t/t4018-diff-funcname.sh: do
- test_expect_success "$desc" '
- git diff -U1 "$what" >diff &&
-- sed -n -e "s/^.*@@$//p" -e "s/^.*@@ //p" <diff >actual &&
-+ last_diff_context_line diff >actual &&
- test_cmp expected actual
- ' &&
+ # add test file to the index
+ git add \"$i\" &&
+- # place modified file in the worktree
+- sed -e 's/ChangeMe/IWasChanged/' <\"t4018/$i.content\" >\"$i\"
++ do_change_me \"$i\"
+ "
+ test_expect_success "hunk header: $i" "
+ git diff -U1 $i >diff &&
+- sed -n -e 's/^.*@@$//p' -e 's/^.*@@ //p' <diff >ctx &&
++ last_diff_context_line diff >ctx &&
+ test_cmp t4018/$i.header ctx
+ "
+ done
-: ----------- > 14: e64a00d020e userdiff tests: add alternative hunk header test infrastructure
-: ----------- > 15: 3dab65bf394 userdiff tests: add a test with multiple tests in a LANG file
13: 84d20a7cd0c ! 16: 6eff13d01d3 userdiff tests: do config teardown in test_diff_funcname()
@@ Commit message
## t/t4018-diff-funcname.sh ##
@@ t/t4018-diff-funcname.sh: test_diff_funcname () {
git diff -U1 "$what" >diff &&
- sed -n -e "s/^.*@@$//p" -e "s/^.*@@ //p" <diff >actual &&
+ last_diff_context_line diff >actual &&
test_cmp expected actual
+ ' &&
+
14: 70fc9fa565b ! 17: 48f15aed4e4 userdiff tests: move custom patterns into one test file
@@ Commit message
## t/t4018-diff-funcname.sh ##
@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
- builtin_drivers=$(test-tool userdiff list-builtin-drivers) &&
- test -n "$builtin_drivers" &&
+ sort <builtin-drivers >builtin-drivers.sorted &&
+ test_cmp builtin-drivers.sorted builtin-drivers &&
- # a non-trivial custom pattern
- git config diff.custom1.funcname "!static
@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
diffpatterns="
- $builtin_drivers
+ $(cat builtin-drivers)
- custom1
- custom2
- custom3
15: 8539d6d464e = 18: 11556fe0967 userdiff tests: remove hack for "RIGHT" token
16: 121e5d6dfaf ! 19: 1b96e89843c userdiff tests: do not do compile tests on "custom" pattern
@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
'
-diffpatterns="
-- $builtin_drivers
+- $(cat builtin-drivers)
- custom
-"
-
-for p in $diffpatterns
-+for p in $builtin_drivers
++for p in $(cat builtin-drivers)
do
test_expect_success "builtin $p pattern compiles" '
echo "*.java diff=$p" >.gitattributes &&
-@@ t/t4018-diff-funcname.sh: test_diff_funcname () {
- '
- }
+@@ t/t4018-diff-funcname.sh: test_expect_success 'last regexp must not be negated' '
+ test_i18ngrep ": Last expression must not be negated:" msg
+ '
--for what in $diffpatterns
-+for what in $builtin_drivers custom
- do
- test="$TEST_DIRECTORY/t4018/$what.sh"
- if ! test -e "$test"
++diffpatterns="
++ $(cat builtin-drivers)
++ custom
++"
++
+ test_expect_success 'setup hunk header tests' '
+ for i in $diffpatterns
+ do
-: ----------- > 20: d3cbfc4354d userdiff tests: assert that new built-in drivers have tests
17: 451b7ae453d = 21: fd6c51ac6db userdiff tests + docs: document & test "diff.<driver>.x?funcname"
18: 5a402bb9bf1 = 22: 43d818be785 gitattributes doc: reword discussion of built-in userdiff patterns
-: ----------- > 23: 37d54d77755 userdiff tests: move perl tests to perl.sh
-: ----------- > 24: b6f4f613857 userdiff tests: move away from "RIGHT" in perl.sh
19: a3badb1a3ee ! 25: a39ba8e2545 gitattributes doc: document multi-line userdiff patterns
@@ Documentation/gitattributes.txt: backslashes; the pattern above picks a line tha
-There are built-in patterns shipped as part of git itself. A more
-advanced version of the `tex` pattern discussed above is one of them.
+Multiple patterns can be supplied by listing them one per line
-+separated by `\n`. They will be matched one at a time from left to
-+right. Do not supply a trailing "\n" for the last pattern. E.g.:
++separated by `\n`. They will be matched one line at a time, e.g.:
+
+------------------------
+[diff "perl"]
+ xfuncname = "!^=head\n^[^ ]+.*"
+------------------------
+
-+Patterns in in a list of multiple that begin with "!" are negated. A
-+matching negated pattern will cause the matched line to be
++Patterns in a list of multiple patterns that begin with "!" are
++negated. A matching negated pattern will cause the matched line to be
+skipped. Use it to skip a later pattern that would otherwise match. It
+is an error if one or more negated patterns aren't followed by a
+non-negated pattern.
@@ Documentation/gitattributes.txt: backslashes; the pattern above picks a line tha
+construct that will match a literal "!" without "!" being the first
+character on that line, such as "[!]".
+
++If the last pattern in a list of multiple patterns ends with "\n" it
++will be interpreted as an empty pattern, and will match the first
++empty line. It's almost always a logic error to provide a list of
++multiple patterns ending with "\n", but it's permitted in case you
++genuinely want to match an empty line.
++
+If the pattern contains a `$1` capture it will be used instead of the
+entire matching line (`$0`) to display the hunk header. This can be
+used e.g. to strip whitespace from the beginning of the line, or to
@@ t/t4018/custom.sh: ChangeMe
+foo
+EOF_HUNK
+sub foo;
++
+=head1
++
++ChangeMe
++
++EOF_TEST
++
++test_expect_success 'custom: multiple patterns ending with \n' '
++ git config diff.custom.xfuncname "!^=head
++^sub ([^;]+)
++"
++'
++
++test_diff_funcname 'custom: multiple patterns ending with \n' \
++ 8<<\EOF_HUNK 9<<\EOF_TEST
++
++EOF_HUNK
++sub foo;
++
++=head1
++
+ChangeMe
+
+EOF_TEST
## t/t4018/perl.sh ##
-@@ t/t4018/perl.sh: sub RIGHT
+@@ t/t4018/perl.sh: sub asub
print "ChangeMe\n";
}
EOF_TEST
@@ t/t4018/perl.sh: sub RIGHT
+EOF_HUNK
+sub foo;
+=head1
-+ChangeMe
+
++ChangeMe
+EOF_TEST
-: ----------- > 26: 27394c6c2a4 userdiff tests: switch to -U0 by default
20: 1b46726e85f = 27: 91ab863a298 userdiff tests: remove "funcname" from custom3 test
22: 24548fb680e < -: ----------- userdiff tests: test hunk headers on accumulated files
23: 48f00a59d5e < -: ----------- userdiff tests: test hunk header selection with -U0
24: 05a01990c9c ! 28: b68133ce5f7 userdiff tests: assert empty hunk header context on -U<large>
@@ Commit message
Assert the existing behavior that under -U<large> we'll show no hunk
header context, where <large> takes us past the potential hunk header
- we'd have extracted. I'm just picking a number over nine thousand as a
- really large number we're unlikely to exceed in these tests.
+ we'd have extracted.
+
+ I'm just picking a number over nine thousand as a really large number
+ we're unlikely to exceed in these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
@@ t/t4018-diff-funcname.sh: test_diff_funcname () {
test_cmp expected actual
' &&
-+ test_expect_success "$desc -U9001 (accumulated)" '
-+ git diff -U9001 "$what".acc >diff &&
-+ last_diff_context_line diff >actual.lines &&
-+ tail -n 1 actual.lines >actual &&
++ test_expect_success "$desc -U9001" '
++ git diff -U9001 "$what" >diff &&
++ last_diff_context_line diff >actual &&
+ echo >blank &&
+ test_cmp blank actual
+ ' &&
25: 3d2f42d7041 < -: ----------- userdiff: match "package" in diff=golang
-: ----------- > 29: 9f3a7ca788b userdiff tests: test for a bug in 1dbf0c0ad6c
-: ----------- > 30: 43ee24e554b userdiff golang: simplify and correct matching regex
-: ----------- > 31: 70a2e7ca70b userdiff golang: don't over-match intented constructs
-: ----------- > 32: 6b942cd651b userdiff golang: add a rule to match "package"
-: ----------- > 33: f45d35387d9 userdiff golang: match multi-line "const" and "import"
26: b2e16ade06c ! 34: c67c3e160f3 userdiff tests: add basic test for ada
@@ Commit message
1. https://rosettacode.org/wiki/99_bottles_of_beer#Ada
2. https://en.wikibooks.org/wiki/Ada_Programming/Tasking
+ ## t/t4018-diff-funcname.sh ##
+@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
+ # Do not add anything to this list. New built-in drivers should have
+ # tests
+ cat >drivers-no-tests <<-\EOF &&
+- ada
+ bibtex
+ csharp
+ html
+
## t/t4018/ada.sh (new) ##
@@
+#!/bin/sh
27: 826b6f4d6ae ! 35: e2aedd738ef userdiff tests: add basic test for ruby
@@ Commit message
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
+ ## t/t4018-diff-funcname.sh ##
+@@ t/t4018-diff-funcname.sh: test_expect_success 'setup' '
+ html
+ objc
+ pascal
+- ruby
+ tex
+ EOF
+
+
## t/t4018/ruby.sh (new) ##
@@
+#!/bin/sh
@@ t/t4018/ruby.sh (new)
+EOF_TEST
+
+test_diff_funcname 'ruby: picks first "class/module/def" before changed context' \
-+ "class Two" \
++ '-U1' \
+ 8<<\EOF_HUNK 9<<\EOF_TEST
+class One
+EOF_HUNK
--
2.30.0.284.gd98b1dd5eaa7
next prev parent reply other threads:[~2021-02-24 19:52 UTC|newest]
Thread overview: 192+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-13 19:24 [PATCH] userdiff: add support for Emacs Lisp Adam Spiers
2021-02-14 1:41 ` Ævar Arnfjörð Bjarmason
2021-02-14 8:12 ` Johannes Sixt
2021-02-14 11:10 ` Johannes Sixt
2021-02-14 18:25 ` Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 00/20] userdiff: refactor + test + doc + misc improvements Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 00/27] " Ævar Arnfjörð Bjarmason
2021-02-15 15:50 ` [PATCH 0/2] diff: do not display hunk context under -W Ævar Arnfjörð Bjarmason
2021-02-15 15:50 ` [PATCH 1/2] " Ævar Arnfjörð Bjarmason
2021-02-15 18:47 ` René Scharfe.
2021-02-15 19:24 ` Ævar Arnfjörð Bjarmason
2021-02-15 21:17 ` René Scharfe.
2021-02-16 1:30 ` Junio C Hamano
2021-02-16 1:37 ` Junio C Hamano
2021-02-16 7:20 ` Johannes Sixt
2021-02-16 17:51 ` Junio C Hamano
2021-02-15 15:50 ` [PATCH 2/2] diff: test and document -W interaction with -U<n> Ævar Arnfjörð Bjarmason
2021-02-16 7:26 ` Johannes Sixt
2021-02-15 17:45 ` [PATCH v2 00/27] userdiff: refactor + test + doc + misc improvements Eric Sunshine
2021-02-15 20:03 ` Johannes Sixt
2021-02-24 19:50 ` Ævar Arnfjörð Bjarmason [this message]
2021-02-27 7:47 ` [PATCH v3 00/35] 20210215154427.32693-1-avarab@gmail.com Johannes Sixt
2021-02-28 11:04 ` Johannes Sixt
2021-02-28 16:07 ` Ævar Arnfjörð Bjarmason
2021-03-01 7:10 ` Johannes Sixt
2021-03-24 1:48 ` [PATCH v4 00/10] userdiff: refactor + test improvements Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 01/10] userdiff: refactor away the parse_bool() function Ævar Arnfjörð Bjarmason
2021-03-24 18:47 ` Jeff King
2021-03-24 1:48 ` [PATCH v4 02/10] userdiff style: re-order drivers in alphabetical order Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 03/10] userdiff style: declare patterns with consistent style Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 04/10] userdiff style: normalize pascal regex declaration Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 05/10] userdiff: add and use for_each_userdiff_driver() Ævar Arnfjörð Bjarmason
2021-03-24 4:50 ` Junio C Hamano
2021-03-24 19:12 ` Jeff King
2021-03-24 19:57 ` Junio C Hamano
2021-03-24 20:43 ` Jeff King
2021-03-24 23:05 ` Ævar Arnfjörð Bjarmason
2021-03-25 0:33 ` Jeff King
2021-03-25 1:26 ` Ævar Arnfjörð Bjarmason
2021-03-26 3:27 ` Jeff King
2021-04-09 19:44 ` Ævar Arnfjörð Bjarmason
2021-04-09 20:11 ` Jeff King
2021-04-09 22:37 ` Junio C Hamano
2021-04-10 12:30 ` Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 06/10] userdiff tests: explicitly test "default" pattern Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 07/10] userdiff tests: list builtin drivers via test-tool Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 08/10] userdiff: remove support for "broken" tests Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 09/10] blame tests: don't rely on t/t4018/ directory Ævar Arnfjörð Bjarmason
2021-03-24 1:48 ` [PATCH v4 10/10] blame tests: simplify userdiff driver test Ævar Arnfjörð Bjarmason
2021-03-24 17:19 ` [PATCH v4 00/10] userdiff: refactor + test improvements Johannes Sixt
2021-03-24 19:02 ` Junio C Hamano
2021-03-24 19:14 ` Jeff King
2021-04-08 15:04 ` [PATCH v5 0/9] " Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 1/9] userdiff style: re-order drivers in alphabetical order Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 2/9] userdiff style: declare patterns with consistent style Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 3/9] userdiff style: normalize pascal regex declaration Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 4/9] userdiff: add and use for_each_userdiff_driver() Ævar Arnfjörð Bjarmason
2021-04-08 19:29 ` Junio C Hamano
2021-04-08 15:04 ` [PATCH v5 5/9] userdiff tests: explicitly test "default" pattern Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 6/9] userdiff tests: list builtin drivers via test-tool Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 7/9] userdiff: remove support for "broken" tests Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 8/9] blame tests: don't rely on t/t4018/ directory Ævar Arnfjörð Bjarmason
2021-04-08 15:04 ` [PATCH v5 9/9] blame tests: simplify userdiff driver test Ævar Arnfjörð Bjarmason
2021-02-24 19:50 ` [PATCH v3 01/35] userdiff: refactor away the parse_bool() function Ævar Arnfjörð Bjarmason
2021-02-24 19:50 ` [PATCH v3 02/35] userdiff style: re-order drivers in alphabetical order Ævar Arnfjörð Bjarmason
2021-02-24 19:50 ` [PATCH v3 03/35] userdiff style: declare patterns with consistent style Ævar Arnfjörð Bjarmason
2021-02-24 19:50 ` [PATCH v3 04/35] userdiff style: normalize pascal regex declaration Ævar Arnfjörð Bjarmason
2021-02-24 19:50 ` [PATCH v3 05/35] userdiff: add and use for_each_userdiff_driver() Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 06/35] userdiff tests: explicitly test "default" pattern Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 07/35] userdiff tests: list builtin drivers via test-tool Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 08/35] userdiff: remove support for "broken" tests Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 09/35] blame tests: don't rely on t/t4018/ directory Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 10/35] blame tests: simplify userdiff driver test Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 11/35] userdiff tests: match full hunk headers Ævar Arnfjörð Bjarmason
2021-02-25 2:47 ` Junio C Hamano
2021-02-24 19:51 ` [PATCH v3 12/35] userdiff tests: change setup loop to individual test setup Ævar Arnfjörð Bjarmason
2021-02-25 2:52 ` Junio C Hamano
2021-02-25 18:28 ` Johannes Sixt
2021-02-25 19:06 ` Junio C Hamano
2021-02-24 19:51 ` [PATCH v3 13/35] userdiff tests: factor out test_diff_funcname() logic Ævar Arnfjörð Bjarmason
2021-02-25 2:57 ` Junio C Hamano
2021-02-24 19:51 ` [PATCH v3 14/35] userdiff tests: add alternative hunk header test infrastructure Ævar Arnfjörð Bjarmason
2021-02-28 11:12 ` Johannes Sixt
2021-02-24 19:51 ` [PATCH v3 15/35] userdiff tests: add a test with multiple tests in a LANG file Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 16/35] userdiff tests: do config teardown in test_diff_funcname() Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 17/35] userdiff tests: move custom patterns into one test file Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 18/35] userdiff tests: remove hack for "RIGHT" token Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 19/35] userdiff tests: do not do compile tests on "custom" pattern Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 20/35] userdiff tests: assert that new built-in drivers have tests Ævar Arnfjörð Bjarmason
2021-02-28 10:34 ` Johannes Sixt
2021-02-28 15:51 ` Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 21/35] userdiff tests + docs: document & test "diff.<driver>.x?funcname" Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 22/35] gitattributes doc: reword discussion of built-in userdiff patterns Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 23/35] userdiff tests: move perl tests to perl.sh Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 24/35] userdiff tests: move away from "RIGHT" in perl.sh Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 25/35] gitattributes doc: document multi-line userdiff patterns Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 26/35] userdiff tests: switch to -U0 by default Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 27/35] userdiff tests: remove "funcname" from custom3 test Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 28/35] userdiff tests: assert empty hunk header context on -U<large> Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 29/35] userdiff tests: test for a bug in 1dbf0c0ad6c Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 30/35] userdiff golang: simplify and correct matching regex Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 31/35] userdiff golang: don't over-match intented constructs Ævar Arnfjörð Bjarmason
2021-02-26 7:59 ` Johannes Sixt
2021-02-24 19:51 ` [PATCH v3 32/35] userdiff golang: add a rule to match "package" Ævar Arnfjörð Bjarmason
2021-02-26 8:03 ` Johannes Sixt
2021-02-24 19:51 ` [PATCH v3 33/35] userdiff golang: match multi-line "const" and "import" Ævar Arnfjörð Bjarmason
2021-02-24 19:51 ` [PATCH v3 34/35] userdiff tests: add basic test for ada Ævar Arnfjörð Bjarmason
2021-02-27 7:26 ` Johannes Sixt
2021-02-24 19:51 ` [PATCH v3 35/35] userdiff tests: add basic test for ruby Ævar Arnfjörð Bjarmason
2021-02-27 7:30 ` Johannes Sixt
2021-02-15 15:44 ` [PATCH v2 01/27] userdiff: refactor away the parse_bool() function Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 02/27] userdiff style: re-order drivers in alphabetical order Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 03/27] userdiff style: declare patterns with consistent style Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 04/27] userdiff style: normalize pascal regex declaration Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 05/27] userdiff: add and use for_each_userdiff_driver() Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 06/27] userdiff tests: explicitly test "default" pattern Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 07/27] userdiff tests: list builtin drivers via test-tool Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 08/27] userdiff: remove support for "broken" tests Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 09/27] userdiff tests: match full hunk headers Ævar Arnfjörð Bjarmason
2021-02-15 17:13 ` Johannes Sixt
2021-02-15 18:48 ` Ævar Arnfjörð Bjarmason
2021-02-16 18:32 ` Junio C Hamano
2021-02-16 21:45 ` Johannes Sixt
2021-02-17 1:27 ` Ævar Arnfjörð Bjarmason
2021-02-17 19:01 ` Junio C Hamano
2021-02-23 13:11 ` Ævar Arnfjörð Bjarmason
2021-02-23 21:02 ` Johannes Sixt
2021-02-24 11:12 ` Ævar Arnfjörð Bjarmason
2021-02-24 17:13 ` Johannes Sixt
2021-02-17 2:03 ` Junio C Hamano
2021-02-17 2:13 ` Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 10/27] blame tests: don't rely on t/t4018/ directory Ævar Arnfjörð Bjarmason
2021-02-16 23:49 ` Junio C Hamano
2021-02-15 15:44 ` [PATCH v2 11/27] blame tests: simplify userdiff driver test Ævar Arnfjörð Bjarmason
2021-02-15 17:23 ` Johannes Sixt
2021-02-17 1:33 ` Ævar Arnfjörð Bjarmason
2021-02-17 1:40 ` Junio C Hamano
2021-02-17 7:10 ` Johannes Sixt
2021-02-15 15:44 ` [PATCH v2 12/27] userdiff tests: rewrite hunk header test infrastructure Ævar Arnfjörð Bjarmason
2021-02-15 17:53 ` Johannes Sixt
2021-02-15 20:06 ` Ævar Arnfjörð Bjarmason
2021-02-15 20:29 ` Johannes Sixt
2021-02-16 18:35 ` Junio C Hamano
2021-02-15 15:44 ` [PATCH v2 13/27] userdiff tests: do config teardown in test_diff_funcname() Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 14/27] userdiff tests: move custom patterns into one test file Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 15/27] userdiff tests: remove hack for "RIGHT" token Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 16/27] userdiff tests: do not do compile tests on "custom" pattern Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 17/27] userdiff tests + docs: document & test "diff.<driver>.x?funcname" Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 18/27] gitattributes doc: reword discussion of built-in userdiff patterns Ævar Arnfjörð Bjarmason
2021-02-16 23:57 ` Junio C Hamano
2021-02-15 15:44 ` [PATCH v2 19/27] gitattributes doc: document multi-line " Ævar Arnfjörð Bjarmason
2021-02-15 18:18 ` Johannes Sixt
2021-02-15 19:01 ` Ævar Arnfjörð Bjarmason
2021-02-17 0:03 ` Junio C Hamano
2021-02-15 15:44 ` [PATCH v2 20/27] userdiff tests: remove "funcname" from custom3 test Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 21/27] userdiff tests: factor out test_diff_funcname() logic Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 22/27] userdiff tests: test hunk headers on accumulated files Ævar Arnfjörð Bjarmason
2021-02-15 18:29 ` Johannes Sixt
2021-02-15 15:44 ` [PATCH v2 23/27] userdiff tests: test hunk header selection with -U0 Ævar Arnfjörð Bjarmason
2021-02-15 19:09 ` Johannes Sixt
2021-02-15 15:44 ` [PATCH v2 24/27] userdiff tests: assert empty hunk header context on -U<large> Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 25/27] userdiff: match "package" in diff=golang Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 26/27] userdiff tests: add basic test for ada Ævar Arnfjörð Bjarmason
2021-02-15 15:44 ` [PATCH v2 27/27] userdiff tests: add basic test for ruby Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 01/20] userdiff: refactor away the parse_bool() function Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 02/20] userdiff: re-order builtin drivers in alphabetical order Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 03/20] userdiff: add and use for_each_userdiff_driver() Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 04/20] userdiff tests: explicitly test "default" pattern Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 05/20] userdiff tests: list builtin drivers via test-tool Ævar Arnfjörð Bjarmason
2021-02-15 1:24 ` Eric Sunshine
2021-02-15 0:52 ` [PATCH 06/20] userdiff: remove support for "broken" tests Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 07/20] userdiff tests: match full hunk headers Ævar Arnfjörð Bjarmason
2021-02-15 1:35 ` Eric Sunshine
2021-02-15 0:52 ` [PATCH 08/20] userdiff tests: rewrite hunk header test infrastructure Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 09/20] blame tests: don't rely on t/t4018/ directory Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 10/20] userdiff tests: move custom patterns into one test file Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 11/20] userdiff tests: remove hack for "RIGHT" token Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 12/20] userdiff: match "package" in diff=golang Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 13/20] userdiff tests + docs: document & test "diff.<driver>.x?funcname" Ævar Arnfjörð Bjarmason
2021-02-15 3:16 ` Eric Sunshine
2021-02-15 0:52 ` [PATCH 14/20] gitattributes doc: reword discussion of built-in userdiff patterns Ævar Arnfjörð Bjarmason
2021-02-15 3:26 ` Eric Sunshine
2021-02-15 0:52 ` [PATCH 15/20] gitattributes doc: document multi-line " Ævar Arnfjörð Bjarmason
2021-02-15 3:16 ` Chris Torek
2021-02-15 3:36 ` Eric Sunshine
2021-02-15 0:52 ` [PATCH 16/20] userdiff tests: remove "funcname" from custom3 test Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 17/20] userdiff tests: factor out test_diff_funcname() logic Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 18/20] userdiff tests: test hunk headers on accumulated files Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 19/20] userdiff tests: test hunk header selection with -U0 Ævar Arnfjörð Bjarmason
2021-02-15 0:52 ` [PATCH 20/20] userdiff tests: assert empty hunk header context on -U<large> Ævar Arnfjörð Bjarmason
2021-02-16 8:26 ` [PATCH] userdiff: add support for Emacs Lisp Protesilaos Stavrou
2021-02-16 11:13 ` Ævar Arnfjörð Bjarmason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210224195129.4004-1-avarab@gmail.com \
--to=avarab@gmail.com \
--cc=chris.torek@gmail.com \
--cc=git@adamspiers.org \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=j6t@kdbg.org \
--cc=jrnieder@gmail.com \
--cc=levraiphilippeblain@gmail.com \
--cc=peff@peff.net \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.